유리/바살트/아라미드 섬유 복합재료의 적층구조에 따른 기계적 특성의 영향
Effect of Laminated Structure on the Mechanical Properties of Glass/Basalt/Aramid Fiber Composites
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In recent, fiber-reinforced composites have been widely used in many fields because of their excellent performance. In order to manufacture lightweight, high-performance, and inexpensive composites various laminated structures were designed. Six types of hybrid composites were fabricated with glass/basalt/aramid fibers by VARTM process. The effect of the laminated structure on the mechanical properties of composites was investigated through impact energy, tensile and bending strength. Compared to other conditions more higher impact energy was obtained when the aramid fibers were in the center position and more higher bending strength was obtained when the fibers are laminated in the order of increasing bending performance from top to bottom. The laminate structure did not affect tensile strength which mainly depends on the property of fibers.
Abstract
In recent, fiber-reinforced composites have been widely used in many fields because of their excellent performance. In order to manufacture lightweight, high-performance, and inexpensive composites various laminated structures were designed. Six types of hybrid composites were fabricated with glass/basalt/aramid fibers by VARTM process. The effect of the laminated structure on the mechanical properties of composites was investigated through impact energy, tensile and bending strength. Compared to other conditions more higher impact energy was obtained when the aramid fibers were in the center position and more higher bending strength was obtained when the fibers are laminated in the order of increasing bending performance from top to bottom. The laminate structure did not affect tensile strength which mainly depends on the property of fibers.
참고문헌 (14)
- Z. Shi, "Manufacturing method of aramid fiber applied to wearable intelligent system", Journal of Alloys and Compounds, 869, pp.159314~ (2021)
- B. Zhang, "Surface and interface modification of aramid fiber and its reinforcement for polymer composites : A review", European Polymer Journal, 147, pp.110352~ (2021)
- G. Yang, "Recent progresses of fabrication and characterization of fibers-reinforced composites : A review", Composite Communications, 14, pp.34~42 (2019)
- Y. Hu, "Low-velocity impact damage research on CFRPs with Kevlar-fiber toughening", Composite Structure, 216, pp.127~141 (2019)
- J. P. Lin, "Effect of atmospheric pressure plasma treatment on surface physicochemical properties of carbon fiber reinforced polymer and its interfacial bonding strength with adhesive", Composites Part B: Engineering, 199, pp.108237~ (2020)
- L. Zhang, "Polydopamine-assisted strategies for preparation of fire-safe polymeric materials : A review", European Polymer Journal, 138, pp.109973~ (2020)
- J. W. Kim, "Mechanism study of atmospheric-pressure plasma treatment of carbon fiber reinforced polymers for adhesion improvement", Surface & Coatings Technology, 393, pp.125841~ (2020)
- B. G. Cho, "The effects of plasma surface treatment on the mechanical properties of polycarbonate", carbon nanotube, Composites Part B: Engineering, pp.2019, 160[DOI]
- H. Lee, "Effect of plasma surface treatment of recycled carbon fiber on carbon fiber-reinforced plastics(CFRP)interfacial properties", Applied Surface Science, 328, pp.241~246 (2015)
- D. Li, "Effects of low-temperature plasma treatment on wettability of glass surface : molecular dynamic simulation and experimental study", Applied Surface Science, 503, pp.144257~ (2020)
- J. H. Song, "Pairing effect and tensile properties of laminated high-performance hybrid composites prepared using carbon", glass and carbon, Composites Part B: Engineering, pp.2015, 79[DOI]
- ASTM, "Standard Test Method for Tensile Properties of Plastic. ASTM D638-14", ~ (2017)
- ASTM, "Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. ASTM D790-17", ~ (2017)
- ISO, "Plastics-Determination of Charpy impact properties. ISO 179", ~ (2020)