스크롤 공기 압축기용 고체윤활 코팅 특성에 관한 연구
A Study on the Solid Lubricant Coating Characteristics for Scroll Air Compressor
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The coating of solid lubricant on the part of fixed or orbiting scroll wrap in a scroll compressorcan not only reduce friction loss, noise & vibration and time cost for surface finishing but also improveefficiency and performance of the compressor. In this study, we found the most appropriate combinationof the solid lubricant by carrying out many measurements and tests such as coefficient of friction,surface structure, the coating thickness and surface roughness for the various cases. We have come toconclusion that the most appropriate solid lubricant can be obtained by adding WS2 3% to Base(SM3901) without any solvent and filler.
Abstract
The coating of solid lubricant on the part of fixed or orbiting scroll wrap in a scroll compressorcan not only reduce friction loss, noise & vibration and time cost for surface finishing but also improveefficiency and performance of the compressor. In this study, we found the most appropriate combinationof the solid lubricant by carrying out many measurements and tests such as coefficient of friction,surface structure, the coating thickness and surface roughness for the various cases. We have come toconclusion that the most appropriate solid lubricant can be obtained by adding WS2 3% to Base(SM3901) without any solvent and filler.
참고문헌 (6)
- 권관구, "IDI 디젤기관에서 배기배출물에 미치는 바이오디젤유의 영향", 한국기계기술학회지, 16(3), pp.1483~1488 (2014), 한국기계기술학회
- 최승훈, "An Experimental Study on Biodiesel Production from Animal Fat", 한국기계기술학회지, 14(2), pp.41~46 (2012), 한국기계기술학회[DOI]
- Practical Development of Eco-friendly Scroll Air Compressor(5HP)by Reducing Friction, "B. S. Kim", The Small and Medium Business Administration, 1~62 (2014)
- 이무연, "인버터 스크롤 압축기를 적용한 루프형 전동공조시스템의 냉방성능특성에 관한 연구", 한국산학기술학회논문지, 12(10), pp.4308~4313 (2011), 한국산학기술학회
- W. Y. Jee, "Fabrication of copper micro pattern on aluminum using anodizing and electrochemical deposition", International Journal of the Korean of Precision Engineering, pp.151~152 (2012)
- M. H. Kwon, "Fabrication of micro groove on aluminum using anodizing, laser beam and electrochemical etching", International Journal of the Korean of Precision Engineering, pp.253~254 (2011)