마이크로 가스터빈 내의 열유동해석
Heat and Flow Analysis in the Micro Gas Turbine
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This research is to investigate the performance analysis of micro gas turbine for consturction equipments with three different numbers of the nozzle vane in the micro gas turbine. Velocity, pressure. and temperature distributions of fluid over the flow domain of the turbine and turbulent kinetic energy of three different turbine blades are numerically calculated for the optimum design of turbine blade with two different rotational speeds of the turbine blade (10000 and 20000 RPM). Ultimately, the energy-efficient and maximum power-generated shape of the nozzle vane are determined through two different rotational speeds of the turbine with three shapes of the nozzle vane (6, 8, and 12 EA).
Abstract
This research is to investigate the performance analysis of micro gas turbine for consturction equipments with three different numbers of the nozzle vane in the micro gas turbine. Velocity, pressure. and temperature distributions of fluid over the flow domain of the turbine and turbulent kinetic energy of three different turbine blades are numerically calculated for the optimum design of turbine blade with two different rotational speeds of the turbine blade (10000 and 20000 RPM). Ultimately, the energy-efficient and maximum power-generated shape of the nozzle vane are determined through two different rotational speeds of the turbine with three shapes of the nozzle vane (6, 8, and 12 EA).
참고문헌 (9)
- Y. Hwang, "Investigation of the mixedness of fuel and air in micro gas turbine engine according to change of fuel injectors", Spring, 2009, 1614~1619
- G. Kwon, "Steam Turbine Design Using 3-Dimensional Flow Analysis", Transactions on KFMA, 53(6), pp.312~317 (2000)
- C. Lee, "Flow and Performance Analysis of the Small Capacity Turbine Using CFD Technique", Fall Conference on KSECC, pp.80~85 (2010)
- 정현주, "조류발전용 수직축 터빈 주위의 비정상 유동 수치해석", 한국해양환경•에너지학회지, 12(1), pp.9~14 (2009), 한국해양환경·에너지학회
- H. Chung, "Numerical Simulation of Three-Dimensional Compressible Viscous Flow Characteristics in Axial-Flow Turbines", Conference on KSCFE, pp.42~48 (2004)
- 모장오, "선박 폐열을 이용한 100㎾급 구심터빈 공력설계 및 CFD에 의한 성능해석", 한국마린엔지니어링학회지, 35(2), pp.175~181 (2011), 한국마린엔지니어링학회
- K. Hur, "Development of Design Analysis for MGT", Spring, 2008, 157~161
- 이동렬, "유동장 해석을 통한 승용차 원심 회전차의 형상 설계", 한국기계기술학회지, 13(3), pp.49~56 (2011), 한국기계기술학회
- 이동렬, "열전달 해석에 의한 파워 증폭기 방열기의 형상 최적화", 한국기계기술학회지, 13(3), pp.1~6 (2011), 한국기계기술학회