페주물사에 함유된 철 입자 용융화를 통한 철 괴 생산에 관한 연구
A study for Product of Iron Lump from Oxidized Iron contained from the Waste Foundry Sand through Melting
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The waste casting sands generated from foundry is about 4,000 tons/day and the great part of them is handled by the method of reclamation and just 10% of them is recycled as a sand. This study is to produce the iron lump of high quality material through melting iron particle which is obtained from thewaste casting sands. By using the high frequency inductive melting furnace after separating iron particle from casting sand by collision and vibrating classifier, iron lump is produced from melting iron particles. The iron lump of iron content of 96.95% is produced from iron particle of 68.05% through this process. It was investigated that the cost of iron lump is four times higher than the one of iron particle and to produce iron lump is worth to 325 won per kg against iron particle with considering the consumed power(electric energy). Therefore, to produce iron lump from waste casting sands is not only to be economical worth but also to strengthen the ground resources system.
Abstract
The waste casting sands generated from foundry is about 4,000 tons/day and the great part of them is handled by the method of reclamation and just 10% of them is recycled as a sand. This study is to produce the iron lump of high quality material through melting iron particle which is obtained from thewaste casting sands. By using the high frequency inductive melting furnace after separating iron particle from casting sand by collision and vibrating classifier, iron lump is produced from melting iron particles. The iron lump of iron content of 96.95% is produced from iron particle of 68.05% through this process. It was investigated that the cost of iron lump is four times higher than the one of iron particle and to produce iron lump is worth to 325 won per kg against iron particle with considering the consumed power(electric energy). Therefore, to produce iron lump from waste casting sands is not only to be economical worth but also to strengthen the ground resources system.
참고문헌 (12)
- C. O. Choi, "The Trend of Development for Recycling and Re-use of Foundry Waste", Journal of Korea Foundry Society, 30(1), pp.14~21 (2010)
- 김영준, "폐주물사의 재활용 활성화 방안에 관한 연구", 유기물자원화, 18(4), pp.38~44 (2010), 유기성자원학회
- H. Gi, "An analysis of the properties of mortar according to the change of the replacement rate waste foundry sands", Journal of Recycled Construction Resources Institute, 4(4), pp.99~104 (2009)
- R. Siddique, "Utilization of waste foundry sand(WFS)in concrete manufacturing", Resources Conservation and Recycling, 55(11), pp.885~892 (2011)
- M. Zanetti, "Recovery of foundry sands and iron fractions from an industrial waste landfill", Resources Conservation and Recycling, 48(4), pp.396~411 (2006)
- Y. Guney, "Re-usage of waste foundry sand in high-strength concrete", Waste Management, 30(8), pp.1705~1713 (2010)
- W. S. Chung, "Analysis of Energy and Material Balance in Smelting Process of Waste Sand", Journal of Korea Foundry Society, 15(5), pp.477~482 (1996)
- 권오경, "고주파 유도가열을 사용한 급속 금형가열에 관한 연구", 대한기계학회논문집 A, 31(5), pp.594~600 (2007), 대한기계학회
- M. Kranjc, "Numerical analysis and thermographic investigation of induction heating", International Journal of Heat and Mass Transfer, 53(17), pp.3585~3591 (2010)
- D. Erach, "Fluid Velocities in Induction Melting Furnaces-Part I. Theory and Laboratory Experiments", Metallurgical Transactions B, 7(3), pp.343~351 (1976)
- J. W. Kim, "A Study on the Shape Memory Effect by Heating Conditions of the Shape Memory Alloy in Iron Base as Vehicle Sheet Plate", Jou. of Korean Soc. of Mechanical Technology, 2(2), pp.1~8 (2000)
- 박명호, "열분해 소각시설에서의 일반폐기물의 연소특성", 한국기계기술학회지, 13(4), pp.149~156 (2011), 한국기계기술학회