송수관로형 헬리켈 마이크로 수차 개발에 관한 연구
A Study on the Development of Helical Micro Water Turbine in Water Pipe Line
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
This is to develop a micro water turbine which makes some power from just a fluid velocity in the water pipe. While power is produced from impulsive force which generated by a high head in the case of existing water turbine, this is to produce a power from rotating force of helical turbine which rotated by fluid velocity in the water pipe. Some results of analysis fluid pattern at turbine blade for design shows that bubble is generated from turbulence surrounding blade and pulsatory motion generated as fluid being blocked and opened by blade due to turbine structure. This two phenomena cause to lower power production efficiency and shorten turbine durability. So this is studied to minimize bubble generation and pulsation for optimizing design of turbine blade. Therefore it is determined that the number of blade is three, geometric form of blade is NACA 4420 and angle of blade is 30 degree. An experiment equipment of water turbine is manufactured on the base of these factors(NACA 4420, angle 30。). It is obtained that power production of turbine increases in proportion to velocity which is changed from 1.7 m/sec to 3.5 m/sec. When fluid velocity is 1.7m/sec the power production of turbine is 355W. Power production increase continuously as increasing the fluid velocity and power is 2kW on 3m/sec of fluid velocity.
Abstract
This is to develop a micro water turbine which makes some power from just a fluid velocity in the water pipe. While power is produced from impulsive force which generated by a high head in the case of existing water turbine, this is to produce a power from rotating force of helical turbine which rotated by fluid velocity in the water pipe. Some results of analysis fluid pattern at turbine blade for design shows that bubble is generated from turbulence surrounding blade and pulsatory motion generated as fluid being blocked and opened by blade due to turbine structure. This two phenomena cause to lower power production efficiency and shorten turbine durability. So this is studied to minimize bubble generation and pulsation for optimizing design of turbine blade. Therefore it is determined that the number of blade is three, geometric form of blade is NACA 4420 and angle of blade is 30 degree. An experiment equipment of water turbine is manufactured on the base of these factors(NACA 4420, angle 30。). It is obtained that power production of turbine increases in proportion to velocity which is changed from 1.7 m/sec to 3.5 m/sec. When fluid velocity is 1.7m/sec the power production of turbine is 355W. Power production increase continuously as increasing the fluid velocity and power is 2kW on 3m/sec of fluid velocity.
참고문헌 (11)
- Korea Energy Agency, "Renewable Energy Strategy 2030", Renewable Energy Center of Korea Energy Agency, ~ (2008)
- "Lucid Energy" (2010)[URL]
- B. Hyun, "Performance Analysis and Design of Vertical Ais Tidal Stream Turbine", Journal of Shipping and Ocean Engineering, 2, pp.191~200 (2012)
- Design and Manufacture of a Cross-Flow Helical Tidal Turbine, "J. Anderson", Turbine Point Design Company, 16~26 (2011)
- 정현주, "조류발전용 수직축 터빈 주위의 비정상 유동 수치해석", 한국해양환경•에너지학회지, 12(1), pp.9~14 (2009), 한국해양환경·에너지학회
- 한준선, "파라메트릭 스터디를 통한 조류발전용 다리우스터빈의 설계연구", 한국해양환경•에너지학회지, 13(4), pp.241~248 (2010), 한국해양환경·에너지학회
- 도인록, "예인수조를 이용한 조류발전 터빈의 동력 계측 및 비교 연구", 한국해양환경•에너지학회지, 14(4), pp.230~238 (2011), 한국해양환경·에너지학회
- 김행곤, "송수관로 초소수력 발전용 헬리컬 터빈의 성능평가", 한국기계기술학회지, 17(2), pp.349~354 (2015), 한국기계기술학회[DOI]
- P. Bachant, "Performance Measurements of Cylindrical-and Spherical-Helical Cross-flow Marine Hydrokinetic Turbines, with Estimates of Energy Efficiency", Renewable Energy, 74, pp.318~325 (2015)
- 한상훈, "조류발전용 헬리컬 터빈의 특성치 분석", 한국해안·해양공학회논문집, 21(4), pp.301~307 (2009), 한국해안,해양공학회
- 김행곤, "덕트가 부착된 유동관형 초소수력 발전용 터빈의 성능평가", 한국기계기술학회지, 17(5), pp.984~989 (2015), 한국기계기술학회