하도에 따른 도장특성에 관한 시험적 연구
A Test Study on Paint Characteristics by Under Coating
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Tracked vehicles for military application such as tank and armored vehicle are operated in severe conditions of driving on gravel road and muddy water including river-crossing. Thus, coating on suchvehicles requires more robust characteristics of coating in adhesion, corrosion(salt-spray) resistance and water resistance than those of vehicles for civil applications. Currently, coatings applied on the military equipments are mostly based on the U.S. military specification(known as Mil-SPEC). Typical specifications for primer materials for military application are MIL-P-23377 and MIL-P-53022. And for topcoat, coating material of KDS 8010-1004 specification is typically applied. However, as MIL-P-23377 or MIL-P-530224 is applied for primer coating not only on the tank andarmored vehicle at system level but also on the sub-components of these equipments, there has been a need for test data for determining the feasibility of alternatively applying either of these two coatings for primer coat. Therefore, in this study, coating characteristics are compared with respect to these t
Abstract
Tracked vehicles for military application such as tank and armored vehicle are operated in severe conditions of driving on gravel road and muddy water including river-crossing. Thus, coating on suchvehicles requires more robust characteristics of coating in adhesion, corrosion(salt-spray) resistance and water resistance than those of vehicles for civil applications. Currently, coatings applied on the military equipments are mostly based on the U.S. military specification(known as Mil-SPEC). Typical specifications for primer materials for military application are MIL-P-23377 and MIL-P-53022. And for topcoat, coating material of KDS 8010-1004 specification is typically applied. However, as MIL-P-23377 or MIL-P-530224 is applied for primer coating not only on the tank andarmored vehicle at system level but also on the sub-components of these equipments, there has been a need for test data for determining the feasibility of alternatively applying either of these two coatings for primer coat. Therefore, in this study, coating characteristics are compared with respect to these t
참고문헌 (10)
- 박경민, "차량 휠 커버용 회전 도장시스템의 도료 분사조건 연구", 한국기계기술학회지, 16(4), pp.1767~1772 (2014), 한국기계기술학회
- 김봉환, "유압식 에어리스 도장 스프레이 펌프의 유동해석", 한국기계기술학회지, 15(4), pp.499~504 (2013), 한국기계기술학회
- Seo, H. S., "The Characteristics of Primer Painting on Titanium Sheet by Sanding Conditions", 12, pp.2825~2830 (2013), The Korean Society of Mechanical Engineers
- 윤한기, "알루미늄 판재의 센딩조건에 따른 도장특성 평가", 한국해양공학회지, 25(1), pp.44~48 (2011), 한국해양공학회
- "Mil-P-23377 : Primer coatings : Epoxy, chemical and solvent resistant", ~
- "Mil-P-53022 : Primer, Epoxy coating, corrosion inhibiting, lead and chrome free", ~
- "KDS 8010-1004 : Polyurethane Coating", ~
- "SAE AMS-QQ-A-250", 4, 2015, Alumium Alloy 2024, Plate and Sheet, 2015
- "KS M ISO 2409, 2008 : Paints and varnishes -Cross-cut test", ~ (2008)
- "KS D 9502, 2009, Neutral, acetic and copperaccelerated acetic acid salt spray", ~ (2009)