CNT의 배향 길이에 따른 CNT-Polyamide 복합재의 특성 변화 연구
A Study on the Change Property of the Composite of CNT-polyamide due to the Aligned Length of CNT
2
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
The characteristics of CNT-Polyamide composites were analyzed, that is, tensile strength, electrical resistivity, and thermal conductivity were measured according to the align length of CNT. There havebeen researches on the influence of aligned CNT to improve the mechanical and thermal characteristics in different areas including absorption and shielding of electromagnetic wave, thermal distribution or absorption, and high-strength of CNT. The aligned CNTs were synthesized by the ethylene gas with a CVD device preheated at 650℃. CNT-Polyamide composites were produced with the mixing of solution. CNT contents were controlledfrom 1phr to 50phr in the polyamide-ethanol solution, and blended with the 700W bar-type ultrasonic wave for 60 min.. And then CNT-polyamide were precipitated by CNT-polyamide-etnanol falling intothe cold water. After dried 12 hours, CNT-polyamide composite were pressed at 150℃~180℃ with 400kgf to get the thickness of 1mm. As the conclusions, aligned CNT bundles were dispersed by cutting of CNT to the aligned direction because of polyamide properties. Tensile strength and electrical resistivity were improved to the increase of aligned length of CNT. Thermal conductivity was little affected by the align length of CNT.
Abstract
The characteristics of CNT-Polyamide composites were analyzed, that is, tensile strength, electrical resistivity, and thermal conductivity were measured according to the align length of CNT. There havebeen researches on the influence of aligned CNT to improve the mechanical and thermal characteristics in different areas including absorption and shielding of electromagnetic wave, thermal distribution or absorption, and high-strength of CNT. The aligned CNTs were synthesized by the ethylene gas with a CVD device preheated at 650℃. CNT-Polyamide composites were produced with the mixing of solution. CNT contents were controlledfrom 1phr to 50phr in the polyamide-ethanol solution, and blended with the 700W bar-type ultrasonic wave for 60 min.. And then CNT-polyamide were precipitated by CNT-polyamide-etnanol falling intothe cold water. After dried 12 hours, CNT-polyamide composite were pressed at 150℃~180℃ with 400kgf to get the thickness of 1mm. As the conclusions, aligned CNT bundles were dispersed by cutting of CNT to the aligned direction because of polyamide properties. Tensile strength and electrical resistivity were improved to the increase of aligned length of CNT. Thermal conductivity was little affected by the align length of CNT.
참고문헌 (13)
- Peigney A., "Specific surface area of carbon nanotubes and bundles of carbon nanotubes", Carbon, 39(4), pp.507~514 (2001)
- 최두호, "LED 조명용 열전도성 고분자 방열 재료의 열적특성 연구", 한국기계기술학회지, 17(1), pp.11~15 (2015), 한국기계기술학회
- Volder M., "Carbon nanotubes : present and future commercial applications", Science, 339(6119), pp.535~539 (2013)
- Hata K., "Water-assisted highly efficient synthesis of impurity-free single-walled carbon nanotubes", Science, 306, pp.1362~1364 (2004)
- Liang Zhang, "Controlling the growth of vertically oriented single-walled carbon nanotubes by varying the density of Co Mo catalyst particles", Chemical Physics Letters, 422(1-3), pp.198~203 (2006)
- Placidus B Amama, "Role of water in super growth of single-walled carbon nanotube carpets", Nano Letters, 9(1), pp.44~49 (2009)
- Tomoya Yamashita, "Mass production technology for vertically aligned carbon nanotubes", Hitz Technical Review, 74(2) (2013)
- 박영수, "Synthesis of aligned and length-controlled carbon nanotubes by chemical vapor deposition", Carbon Letters, 14(2), pp.99~104 (2013), 한국탄소학회
- Young Soo Park, "Analysis of Mechanical and Thermal Properties of CNT-polyamide Composite with Aligned Length of CNTs", KSPE 2015 Spring Conference, pp.715~ (2015)
- 김경재, "CNT-Polyamide 복합재의 전기", 열 전도도 및 인장강도변화에 관한 연구, 2016, pp.18(2), 250~255[DOI]
- Wolfgang Bauhofer, "A review and analysis of electrical percolation in carbon nanotube polymer composites", Composites Science and Technology, 69, pp.1486~1498 (2009)
- 하헌주, "Morphology and Properties of Polyamide", Multi-walled Carbon Nanotube Composites, 2010, pp.18(7), 660~667[DOI]
- Jing Li, "Correlations between Percolation Threshold, Dispersion State, and Aspect Ratio of Carbon Nanotubes", Advanced Functional Materials, 17(16), pp.3207~3215 (2007)