소수력용 구형-헬리컬 터빈의 구조적 안전성 평가
Structural Safety Evaluation of Spherical-Helical Hydro-power Turbine
0
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The objective of this study is to evaluate the structural safety of the spherical-helical turbine for hydro-power. We analyze fluid-structure interaction of the spherical-helical turbine for hydro-power using ANSYS-CFX and Mechanical. The maximum combined stress, deformation and safety factor of the spherical-helical turbine in cases of three types of materials were obtained by fluid-structural analysis. From structural analysis, the maximum value of the equivalent stress occurred at the shaft of the turbine for three material types. In case of a polyethylene turbine blades, the maximum equivalent stress and safety factor were 3.46 MPa and 7.23. Polyethylene turbine blades were evaluated to be safe except of the turbine shaft. Several researches will be performed based on the results of this study and more research and development of technologies are needed in this field.
Abstract
The objective of this study is to evaluate the structural safety of the spherical-helical turbine for hydro-power. We analyze fluid-structure interaction of the spherical-helical turbine for hydro-power using ANSYS-CFX and Mechanical. The maximum combined stress, deformation and safety factor of the spherical-helical turbine in cases of three types of materials were obtained by fluid-structural analysis. From structural analysis, the maximum value of the equivalent stress occurred at the shaft of the turbine for three material types. In case of a polyethylene turbine blades, the maximum equivalent stress and safety factor were 3.46 MPa and 7.23. Polyethylene turbine blades were evaluated to be safe except of the turbine shaft. Several researches will be performed based on the results of this study and more research and development of technologies are needed in this field.
참고문헌 (8)
- B. H. Kim, "A Study on the Flow Analysis for Water Supply Pipeline type Micro Hydro Turbine", Journal of the Korean Socirty of Manufacturing Process Engineers, pp.96~96 (2014)
- 이정언, "송수관로형 헬리켈 마이크로 수차 개발에 관한 연구", 한국기계기술학회지, 18(1), pp.76~81 (2016), 한국기계기술학회[DOI]
- 김행곤, "덕트가 부착된 유동관형 초소수력 발전용 터빈의 성능평가", 한국기계기술학회지, 17(5), pp.984~989 (2015), 한국기계기술학회
- 조우석, "200 W급 자이로밀형 수직축 풍력터빈 로터 블레이드 유체-구조 연성 해석", 한국마린엔지니어링학회지, 37(4), pp.344~350 (2013), 한국마린엔지니어링학회[DOI]
- 하민수, "복합재를 이용한 헬리컬 로터와 풍력터빈 나무 설계 및 구조해석", 한국마린엔지니어링학회지, 37(1), pp.59~65 (2013), 한국마린엔지니어링학회[DOI]
- 김행곤, "송수관로 초소수력 발전용 헬리컬 터빈의 성능평가", 한국기계기술학회지, 17(2), pp.349~354 (2015), 한국기계기술학회[DOI]
- J. S. Tsai, "The Conceptual Design of a Tidal Power Plant in Taiwan", Journal of Marine Science and Engineering, 2(2), pp.506~533 (2014)
- R. Shriyan, "Microturbine : Fabrication For Efficient Power Generation", International Journal of Scientific & Technology, 3(6) (2014)