이중선회 연소기에서 연소 불안정 모드 연구
A Study of Combustion Instability Mode in a Dual Swirl Combustor
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The combustion instability in a dual swirl combustor was investigated experimentally. The effects of thermal power and combustor length on combustion instability were evaluated. Pressure and heat release fluctuation were measured simultaneously. In a conventional combustor, the frequency was decreased with increasing combustorlength and decreasing thermal power. However, it showed different results with a dual swirl combustor. In regime 1 where thermal power was relatively high, the results showed same tendency with a conventional combustor. In regime 2 where thermal power was relatively low, the frequency was almost constant with increasing combustor length. It was found that a beating phenomenon occurred with increased combustor length in regime 2 by measuring sound pressure fluctuation. By confirming that beating phenomenon occurs only in regime 2, it is considered that beating phenomenon is the dominant factor of combustion instability in regime 2. This beating phenomenon inside combustion chamber greatly affected to combustion instability. The reason of the beating phenomenon seemed to be the difference oscillating period between main flame and pilot flame.
Abstract
The combustion instability in a dual swirl combustor was investigated experimentally. The effects of thermal power and combustor length on combustion instability were evaluated. Pressure and heat release fluctuation were measured simultaneously. In a conventional combustor, the frequency was decreased with increasing combustorlength and decreasing thermal power. However, it showed different results with a dual swirl combustor. In regime 1 where thermal power was relatively high, the results showed same tendency with a conventional combustor. In regime 2 where thermal power was relatively low, the frequency was almost constant with increasing combustor length. It was found that a beating phenomenon occurred with increased combustor length in regime 2 by measuring sound pressure fluctuation. By confirming that beating phenomenon occurs only in regime 2, it is considered that beating phenomenon is the dominant factor of combustion instability in regime 2. This beating phenomenon inside combustion chamber greatly affected to combustion instability. The reason of the beating phenomenon seemed to be the difference oscillating period between main flame and pilot flame.
참고문헌 (8)
- 이동렬, "마이크로 가스터빈 내의 열유동해석", 한국기계기술학회지, 17(3), pp.539~544 (2015), 한국기계기술학회
- 이인범, "열충격 및 진동가진에 의한 터빈하우징의 파손현상 예측", 한국기계기술학회지, 16(4), pp.1631~1636 (2014), 한국기계기술학회
- Lord Rayleigh, "The explanation of certain acoustical phenomena", Notices of the proceedings meetings members of the Royal Institution of Great Britain, 8, pp.536~542 (1878)
- Huang, V., "Dynamics and Stability of Lean-premixed Swirl Stabilized Combustion", Progress in Energy and Combustion Science, 35(4), pp.293~364 (2009)
- Steinberg, A. M., "Low-flame Interactions causing Acoustically Coupled Heat Release Fluctuations in a Thermo-acoustically Unstable Gas Turbine Model Combustor", Combustion and Flame, 157(12), pp.2250~2256 (2010)
- 최인찬, "PLIF 및 자발광 계측을 이용한 이중선회 가스터빈 연소기에서 연소불안정 모드 연구", 한국연소학회지, 19(1), pp.29~38 (2014), 한국연소학회[DOI]
- Zähringer K, "Helmholtz behavior and transfer function of an industrial fuel swirl burner used in heating systems", International Journal of Heat and Mass Transfer, 46(18), pp.3539~3548 (2003)
- Syred, N., "The Effect of Hydrogen Containing Fuel Blends upon Flashback in Swirl Burners", Applied Energy, 89(1), pp.106~110 (2012)
