강성 확보를 위한 단면 홈 적용 자동차용 서브-프레임 사이드 멤버의 하이드로포밍 공법 설계
Hydro-Forming Process Design of Automotive Sub-Frame Side Members for Securing Stiffness by Application of Cross-Sectional Groove
1
조회
0
다운로드
4
인용
0
참고문헌
키워드
초록
The hydro-forming design process of the sub-frame side members was studied using a high strength steel of 440 MPa in tensile strength. In the part design stage of the side member, the cross section analysis and the overall process design of the part shape were done. In the detailed simulation results, the maximum thickness reduction rate due to hydro-forming was predicted to be 13% and this was predicted to be a safe level without cracking. The end curvature was reduced to increase the stiffness of the part to design more secure parts and two types of grooves were added to the cross section and compared. The thickness reduction rates of the narrow and wide were improved by 18.6% and 15.6%, respectively when the narrow and wide grooves were added.
Abstract
The hydro-forming design process of the sub-frame side members was studied using a high strength steel of 440 MPa in tensile strength. In the part design stage of the side member, the cross section analysis and the overall process design of the part shape were done. In the detailed simulation results, the maximum thickness reduction rate due to hydro-forming was predicted to be 13% and this was predicted to be a safe level without cracking. The end curvature was reduced to increase the stiffness of the part to design more secure parts and two types of grooves were added to the cross section and compared. The thickness reduction rates of the narrow and wide were improved by 18.6% and 15.6%, respectively when the narrow and wide grooves were added.
참고문헌 (7)
- K. J. Kim, "Conical tube hydro-forming design of automotive instrument panel beams using computer aided engineering", MATERIAL- WISSENSCHAFT UND WERKSTOFF- TECHNIK, 44(5), pp.354~359 (2013)[DOI]
- 김기주, "컴퓨터 시뮬레이션(CAE)을 이용한 자동차용 엔진 크레들의 하이드로-포밍 공정 연구", 한국자동차공학회 논문집, 16(1), pp.86~92 (2008), 한국자동차공학회
- 김기주, "컴퓨터 시뮬레이션(CAE)을 이용한 자동차용 AA6061 리어 서브-프레임 사이드멤버의 하이드로-포밍 공정 개발", 한국자동차공학회 논문집, 18(5), pp.45~49 (2010), 한국자동차공학회
- 김기주, "컴퓨터 응용설계기술(CAE)을 이용한 자동차용 서브-프레임 부품의 하이드로포밍 공법 설계", 한국기계기술학회지, 19(6), pp.765~770 (2017), 한국기계기술학회[DOI]
- 성창원, "자동차용 리어서브-프레임크로스멤버의 하이드로포밍 가공 시뮬레이션", 한국기계기술학회지, 10(2), pp.9~13 (2008), 한국기계기술학회[DOI]
- 김기주, "고속전철 내·외장재용 경량 알루미늄 합금 주조 및 특성 평가", 한국기계기술학회지, 20(1), pp.12~17 (2018), 한국기계기술학회[DOI]
- 김기주, "CAE 정적해석을 통한 자동차용 Torque Strut의내구 안전 설계", 한국기계기술학회지, 18(5), pp.694~699 (2016), 한국기계기술학회[DOI]