Dynamic performance model analysis for six-wheels drive vehicles
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this research, a simulation program is developed in order to investigate non steady-state cornering performance of 6WD/6WS special-purpose vehicles. 6WD vehicles are believed to have good performance on off-the-road maneuvering and to have fail-safe capabilities. But the cornering performances of 6WS vehicles are not well understood in the related literature. In this study, 6WD/6WS vehicles are modeled as a 18 DOF system which includes non-linear vehicle dynamics, tire models, and kinematic effects. Then the vehicle model is constructed into a simulation program using the MATLAB/SIMULINK so that input/output and vehicle parameters can be changed easily with the modulated approach. Cornering performance of the 6WS vehicle is analyzed for brake steering and pivoting, respectively. Simulation results show that cornering performance depends on the middle-wheel steering as well as front/rear wheel steering. In addition, a new 6WS control law is proposed in order to minimize the sideslip angle. Lane change simulation results demonstrate the advantage of 6WS vehicles with the proposed control law.
Abstract
In this research, a simulation program is developed in order to investigate non steady-state cornering performance of 6WD/6WS special-purpose vehicles. 6WD vehicles are believed to have good performance on off-the-road maneuvering and to have fail-safe capabilities. But the cornering performances of 6WS vehicles are not well understood in the related literature. In this study, 6WD/6WS vehicles are modeled as a 18 DOF system which includes non-linear vehicle dynamics, tire models, and kinematic effects. Then the vehicle model is constructed into a simulation program using the MATLAB/SIMULINK so that input/output and vehicle parameters can be changed easily with the modulated approach. Cornering performance of the 6WS vehicle is analyzed for brake steering and pivoting, respectively. Simulation results show that cornering performance depends on the middle-wheel steering as well as front/rear wheel steering. In addition, a new 6WS control law is proposed in order to minimize the sideslip angle. Lane change simulation results demonstrate the advantage of 6WS vehicles with the proposed control law.
참고문헌 (12)
- 김창준, "6WS", 6WD 차량의 독립조향 및 구동 제어알고리즘에 관한 연구, 2011, pp.17(4), 313~320[DOI]
- D. E. Smith, "Effects of Model Complexity on the Performance of Automated Vehicle Steering Controllers : Model Development, Validation and Comparison", Vehicle System Dynamics, 24, pp.163~181 (1995)
- A. G. Nalecz, "Investigation into the stability of four wheel steering vehicles", Int. J. of Vehicle Design, 9(2), pp.159~178 (1988)
- Nonlinear Analysis of Close-Loop Driver, "Automobile Performance with Four Wheel Steering Control", X. Xia, 1992, SAE, 92055
- M. Abe, "Handling Characteristics of Four Wheel Active Steering Vehicles over Full Maneuvering Range of Lateral and longitudinal Accelerations", Proceedings of 11th IAVSD Symposium,Vehicle System Dynamics, 18, pp.1~14 (1989)
- H. Dugoff, "An Analysis of Tire Traction Properties and Their Influence on Vehicle Dynamic Performance", SAE Transactions, 79, pp.341~366 (1970)
- Steady State and Transient Analysis of Ground Vehicle Handling, "R. W. Allen", SAE, ~, pp.SAE, 870495 (1987)
- A New Tire Model with an Application in Vehicle Dynamics Studies, "E. Bakker", SAE, ~, pp.SAE, 890087 (1989)
- Dynamics of Four-Wheel-Steer Off-Highway Vehicles, "L. D. Metz", SAE, ~, pp.SAE, 930765 (1993)
- All-Wheel Steering System for Heavy Truck Application, "D. R. Pillar", SAE, ~, pp.SAE, 952680 (1995)
- Estimation of Dynamic Rollover Threshold of Commercial Vehicles Using Low Speed Experimental Data, "N. S. Das", SAE, ~, pp.SAE, 932949 (1993)
- N. Hata, "An Investigation into Vehicle Controllability and Stability of an Experimental Medium-Duty Truck with Rear-Axle Steering", AVEC (1992)