전극용 몰리브덴 핀 제조-직선 처리기술 메커니즘 설계
Manufacturing of Molybdenum Pin(CCFL) for Electrode-Design of Mechanism for Straight-Line Processing Technology
5
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The molybdenum cup and molybdenum pin, which are the main materials of the molybdenum electrode used for the LCD BLU CCFL electrode, have not been developed in Japan and all of them are imported and used from Japan, is giving a competitive burden. In this research, to develop the manufacturing technology of molybdenum pin used for CCFL electrode of LCD BLU, development of linear processing technology, development of molybdenum wire surface treatment technology, development of wire cutting technology, production of molybdenum pin, design and fabrication of JIG and Fixture for inspection, molybdenum pin prototyping and analysis, and development of 100% molybdenum pin inspection technology. In this paper, especially, research on linear processing technology is treated.
Abstract
The molybdenum cup and molybdenum pin, which are the main materials of the molybdenum electrode used for the LCD BLU CCFL electrode, have not been developed in Japan and all of them are imported and used from Japan, is giving a competitive burden. In this research, to develop the manufacturing technology of molybdenum pin used for CCFL electrode of LCD BLU, development of linear processing technology, development of molybdenum wire surface treatment technology, development of wire cutting technology, production of molybdenum pin, design and fabrication of JIG and Fixture for inspection, molybdenum pin prototyping and analysis, and development of 100% molybdenum pin inspection technology. In this paper, especially, research on linear processing technology is treated.
참고문헌 (12)
- C. B. Moon, "CCFL Defects Detection Algorithm with Shooting Environment", Proceedings of the Korea Information Processing Society Conference, pp.365~368 (2010)
- 문창배, "조합조명 기반 CCFL 불량판별자동화 시스템 구현", 한국산업정보학회논문지, 15(2), pp.69~82 (2010), 한국산업정보학회
- 김영춘, "PSPICE 회로해석에 의한 압전변압기와 CCFL의 모델링", 한국산학기술학회논문지, 7(3), pp.350~357 (2006), 한국산학기술학회
- J. I. Lee, "CCFL Electrode Molybdenum Pin", Proceedings of Korean Society of Mechanical Technology, pp.5~9 (2008)
- J. I. Lee, "The Development of CCFL Electrode Nickle Cup for High Brightness and High Life", Proceedings of Korean Society of Mechanical Technology, pp.43~47 (2009)
- T. Zaitsu, "2MHz Power Converter with Piezoelectric Ceramic Transformer", IEEE INTELEC’92 Proc, pp.430~437 (1992)
- T. Zaitsu, "Piezoelectric Transfomer Converter with PWM Control", IEEE APEC’96 Proc, pp.279~283 (1996)
- L. H. Hwang, "Fabrication and characteristics of PDA LCD backlight driving circuit using piezoelectric transformer", Sensor and Actuator, pp.74~78 (2004)
- L. H. Hwang, "A study on Driving of 35W(T5)fluorescent lamp by the electronic ballast using piezoelectric transformar", ICCE (2005)
- L. H. Hwang, "A study on the T5 Fluorescent Lamp Ballast used Contour Vibration Mode Piezoelectric Transformer using a One-Chip Micro-controller", ISAF, pp.287~290 (2002)
- N. Sun, "Pspice Frequency Dynamic Fluorescent Lamp Model", IEICE Transactions on Electronics, E77-C(2) (1997)
- J. I. Lee, "A Study on CCFL Electrode Molybdenum Pin", Proceedings of the Korea-Academia Information Society Conference, pp.606~609 (2010)