유동소음기용 다공성 발포알루미늄에 대한 유동해석
CFD Analysis of Porous Foamed Aluminium for Flow Silencer
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
There are many disadvantages to existing silencers used in power plants. Recently, high-performance silencers are required in society, so it is necessary to develop silencers accordingly. Therefore, in this study, to develop the flow silencer by taking advantage of the foamed aluminum, the property values such as loss coefficient and porosity were obtained through experiments, based on the Forchheimer's law. CFD analysis was performed by applying a porous modeling technique to foamed aluminum and the results were compared with experimental values. The error rate between the results of the experiment and the flow analysis is within about 2.79%, so the results of the experiment and the analysis agree relatively well. When the foamed aluminum was installed, the flow noise was reduced by about 5.14dB.
Abstract
There are many disadvantages to existing silencers used in power plants. Recently, high-performance silencers are required in society, so it is necessary to develop silencers accordingly. Therefore, in this study, to develop the flow silencer by taking advantage of the foamed aluminum, the property values such as loss coefficient and porosity were obtained through experiments, based on the Forchheimer's law. CFD analysis was performed by applying a porous modeling technique to foamed aluminum and the results were compared with experimental values. The error rate between the results of the experiment and the flow analysis is within about 2.79%, so the results of the experiment and the analysis agree relatively well. When the foamed aluminum was installed, the flow noise was reduced by about 5.14dB.
참고문헌 (9)
- 정일선, "타공형 스트레이너의 압력강하 예측을 위한 다공성모델링", 한국마린엔지니어링학회지, 37(4), pp.358~367 (2013), 한국마린엔지니어링학회[DOI]
- J. H. Shin, "CFX Loss Coefficient calculation method and application", ANFLUX News Letter, 11 (2016)
- 이창열, "악취제거용 세정탑 내 가스유동특성에 관한 연구", 한국기계기술학회지, 19(5), pp.614~619 (2017), 한국기계기술학회[DOI]
- 손영석, "다공성매질을 삽입한 수평채널의 열전달 및 압력강하 특성", 한국마린엔지니어링학회지, 33(2), pp.244~251 (2009), 한국마린엔지니어링학회
- S. S. Lee, "Numerical Analysis for Airflow through Porous Media for Purification of Particulate Flow", WEIK, 19(3), pp.95~100 (2015)
- ANSYS Inc, "ANSYS CFX USER Manual, Version 14", ~ (2013)
- K. T. Oh, "CFD Analysis of Flow and Conjugate Heat Transfer in Metal Foams by using Opensource Openfoam", 2014 KSCFE Spring Conference, pp.60~66 (2014)
- S. S. Lee, "Comparative Study of Porous Media Models in Computational Fluid Dynamics", WEIK, pp.235~240 (2012)
- M. K. Seo, "Pressure Drop Characteristics of Compressible Fluid through Porous Media", 2012 KSPE Fall Conference, pp.417~420 (2012)