의료용 고계조 LCD 소자에 사용되는 고휘도 백라이트의 최적설계
Optimal design of high-brightness backlight used for medical high-gray scale LCD devices
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, it was investigated about optical simulation in high brightness and high uniformity direct-type backlight design for medical application. Direct-type backlight has been used high-brightness backlight such as Medical LCD application. The key parameter in designing direct-type backlight was consists of three geometrical dimension such as the distance of two lamps, the gap of lamp and reflection plate and the number of lamps. It has many of variations in optical design and it causes the different properties in backlight system. It shows the best values of above parameters; 26mm of the distance of two lamps, 4.5mm of the gap of lamp and reflection plate and 16 lamps. And we produced the specimen as above condition, and acquired good result in backlight such as the value of the brightness is 6423 nit in center of emission area and less than 5% in brightness uniformity. It shows the effective ways of designing backlight system using optical simulation method for medical LCD application.
Abstract
In this study, it was investigated about optical simulation in high brightness and high uniformity direct-type backlight design for medical application. Direct-type backlight has been used high-brightness backlight such as Medical LCD application. The key parameter in designing direct-type backlight was consists of three geometrical dimension such as the distance of two lamps, the gap of lamp and reflection plate and the number of lamps. It has many of variations in optical design and it causes the different properties in backlight system. It shows the best values of above parameters; 26mm of the distance of two lamps, 4.5mm of the gap of lamp and reflection plate and 16 lamps. And we produced the specimen as above condition, and acquired good result in backlight such as the value of the brightness is 6423 nit in center of emission area and less than 5% in brightness uniformity. It shows the effective ways of designing backlight system using optical simulation method for medical LCD application.
참고문헌 (9)
- Katsuya Fujisawa, "Edge-light backlight unit using optically patterned film", Japan Journal of Applied Physics, 46(1), pp.194~199 (2007)
- Katsuya Fujisawa, "Edge-light backlight unit using optically patterned film with plural LED placed on side as light source", Japan Journal of Applied Physics, 46(38), pp.L933~L935 (2007)
- Ko-Wei Chien, "Cornelissen “Efficient polarized backlight for transflective liquid crystal display illumination”", Japan Journal of Applied Physics, 44(4A), pp.1818~1819 (2005)
- Akihiro Tagaya, "The advanced highly scattering optical transmission polymer backlight for liquid crystal displays", Japan Journal of Applied Physics, 41, pp.2241~2248 (2002)
- Koichiro Kakinuma, "Technology of wide color gamut backlight with LED for liquid crystal display television", Japan Journal of Applied Physics, 45(5B), pp.4330~4334 (2006)
- 한정민, "Electric-optical Characteristics of Backlight Unit with LED Light Source in Low Temperature Condition", Transactions on Electrical and Electronic Materials, 8(2), pp.93~96 (2007), 한국전기전자재료학회
- 한정민, "Characteristics of Motion-blur Free TFT-LCD using Short Persistent CCFL in Blinking Backlight Driving", Transactions on Electrical and Electronic Materials, 8(4), pp.166~169 (2007), 한국전기전자재료학회
- 한정민, "The Effect of Color Reproduction Properties at TFT-LCD using High Color Reproduction CCFL", Transactions on Electrical and Electronic Materials, 8(5), pp.215~217 (2007), 한국전기전자재료학회
- C. -C. Hu, "New concepts of LCD-TV backlight design with variable lamp pitch", SID Digest, 37, pp.1428~1430 (2006)