장기간 고온에 노출된 방사관의 열응력 및 열변형에 관한 유한요소법 해석
Finite Element Method of Thermal Stress and Deformation of Radiant Tube Under High Temperature
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Radiant tubes heat exchangers are critical components that facilitate the heat transfer process to steel in an annealing furnace, and it addresses several engineering problems, such as thermal stress and mechanical failure due to long-term thermal cycling, which can significantly affect the longevity of the tubes and maintenance requirements. In this study, we used commercial software (ANSYS) to simulate the thermal stress and deformation of radiant tubes subjected to extreme thermal conditions and pressure loads. We evaluated both thermally induced deformation and creep deformation, which is a time-dependent deformation under constant stress over the long term. The results showed that uneven temperature conditions and pressure loads lead to significant deformation and potential failures. To mitigate these engineering challenges, we also tested several designs that include supporting brackets. This study provides valuable insights for designing radiant tube heat exchangers in annealing furnaces to extend their lifespan and ensure system safety.
Abstract
Radiant tubes heat exchangers are critical components that facilitate the heat transfer process to steel in an annealing furnace, and it addresses several engineering problems, such as thermal stress and mechanical failure due to long-term thermal cycling, which can significantly affect the longevity of the tubes and maintenance requirements. In this study, we used commercial software (ANSYS) to simulate the thermal stress and deformation of radiant tubes subjected to extreme thermal conditions and pressure loads. We evaluated both thermally induced deformation and creep deformation, which is a time-dependent deformation under constant stress over the long term. The results showed that uneven temperature conditions and pressure loads lead to significant deformation and potential failures. To mitigate these engineering challenges, we also tested several designs that include supporting brackets. This study provides valuable insights for designing radiant tube heat exchangers in annealing furnaces to extend their lifespan and ensure system safety.
참고문헌 (15)
- Q. Xu, "Study of a new type of radiant tube based on the traditional M-type structure", Applied Thermal Engineering, 150, pp.849~857 (2019)
- A. Al-Meshari, "Failure Analysis of Furnace Tube", Journal of Failure Analysis and Prevention, 13, pp.282~291 (2013)
- M. A. Ali, "Analysis of Thermal Stresses Induced in Radiant Tubes for Heat Exchanger Applications Using Finite Element Method", The Nucleus, 55(3), pp.133~138 (2018)
- M. A. Irfan, "Thermal stresses in radiant tubes due to axial, circumferential and radial temperature distributions", Applied Thermal Engineering, 29, pp.1913~1920 (2009)
- 홍성기, "웨이스트게이트 터보차저의 EWGA 링키지 시스템에 대한 열변형 거동 연구", 한국기계기술학회지, 21(2), pp.228~233 (2019), 한국기계기술학회[DOI]
- J. H. Rhim, "A Study on Life Prediction for High Temperature Creep Rupture Strength of STS 316 Stainless Steel", Korean Society of Mechanical Technology, 2, pp.201~207 (2000)
- A. Ul-Hamid, "Failure analysis of furnace radiant tubes exposed to excessive temperature", Engineering Failure Analysis, 13, pp.1005~1021 (2006)
- A. Reihani, "Failure Analysis of Welded Radiant Tubes Made of Cast Heat-Resisting Steel", Journal of Failure Analysis and Prevention, 13, pp.658~665 (2013)
- N. Schmitz, "Increasing lifetime of metallic recirculating radiant tubes", Heat Process, pp.49~55 (2018)
- S. Caillat, "Radiant tubes lifetime prediction in steel processing lines using fluid–structure interaction modelling", Energy Procedia, 120, pp.596~603 (2017)
- A. M. Garcia, "Combustion model evaluation in a CFD simulation of a radiant-tube burner", Fuel, 276, pp.118013~ (2020)
- M. Hellenkamp, "Thermally induced stresses on radiant heating tubes including the effect of fluid–structure interaction", Applied Thermal Engineering, 94, pp.364~374 (2016)
- G. Dini, "Computational and experimental failure analysis of continuous-annealing furnace radiant tubes exposed to excessive temperature", Engineering Failure Analysis, 15, pp.445~457 (2008)
- M. Sattar, "Limitations on the computational analysis of creep failure models : A review", Engineering Failure Analysis, 134, pp.105968~ (2022)