유효한 알멘강도로 숏피닝된 STS316 강의 수소취화에 대한 피로수명 향상에 관한 연구
A Study on the Improvement of Fatigue Life against Hydrogen Embrittlement of STS316 Steel Peened with Effective Almen Intensity
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, a shot peening was conducted to improve fatigue life by increasing resistance to hydrogen embrittlement of STS316 steel, which is widely used in hydrogen environments. First, considering the efficiency of the shot peening process, an effective Almen intensity was selected and applied to the specimen surface. Second, the specimen was hydrogen embrittled at room temperature (25°C) and high temperature (60°C) using electrochemical hydrogen charging. Third, the mechanical property tests (tensile, hardness, roughness) and 4-points rotational bending fatigue tests of the specimen were performed. All mechanical properties decreased, but the fatigue life of the shot peened specimens improved at the both temperature conditions. Ultimately, the fatigue characteristics against hydrogen embrittlement of STS316 steel, which is used in various industrial fields, are improved through an effective shot peening process, and the effect is believed to be very significant.
Abstract
In this paper, a shot peening was conducted to improve fatigue life by increasing resistance to hydrogen embrittlement of STS316 steel, which is widely used in hydrogen environments. First, considering the efficiency of the shot peening process, an effective Almen intensity was selected and applied to the specimen surface. Second, the specimen was hydrogen embrittled at room temperature (25°C) and high temperature (60°C) using electrochemical hydrogen charging. Third, the mechanical property tests (tensile, hardness, roughness) and 4-points rotational bending fatigue tests of the specimen were performed. All mechanical properties decreased, but the fatigue life of the shot peened specimens improved at the both temperature conditions. Ultimately, the fatigue characteristics against hydrogen embrittlement of STS316 steel, which is used in various industrial fields, are improved through an effective shot peening process, and the effect is believed to be very significant.
참고문헌 (24)
- H. L. YOU, "Analysis of Cool-down Operation of Liquid Hydrogen Tank", Journal of Hydrogen and New Energy, 34(6), pp.641~649 (2023)
- H. Y. PARK, "Consequence Analysis on the Leakage Accident of Hydrogen Fuel in a Combined Cycle Power Plant : Based on the Effect of Regional Environmental Features", Journal of Hydrogen and New Energy, 34(6), pp.698~711 (2023)
- J. W. LIM, "The Technology Development and Substantiation of Small Hydrogen Powered Vessel", Journal of Hydrogen and New Energy, 34(6), pp.555~561 (2023)
- J. S. HWANG, "Evaluation of Hydrogen Embrittlement Resistance of Stainless Steel 316L Material used at Cryogenic Temperatures", Journal of Advanced Marine Engineering and Technology, 43(4), pp.254~262 (2019)
- W. Q. ZHANG, "Combined Effects of Machining-Induced Residual Stress and External Load on SCC Initiation and Early Propagation of 316 Stainless Steel in High Temperature High Pressure Water", Corrosion Science, 190, pp.13~ (2021)
- S. H. NAHM, "Study on VHCF Fatigue Behaviors and UNSM Effects of Hydrogen Attacked STS 316L", Transactions of the Korean Society of Mechanical Engineers, 41(11), pp.1011~1020 (2017)
- W. G. ZHANG, "Correlation between Machining-Induced Surface Alterations and Stress Corrosion Cracking Susceptibility of Austenitic Stainless Steel", Journal of Materials Research and Technology, 26, pp.5076~5094 (2023)
- J. RAJAGURU, "Effect of Machined Surface Integrity on the Stress Corrosion Cracking Behaviour of Super Duplex Stainless Steel", Engineering Failure Analysis, 125, pp.11~ (2021)
- T. H. KIM, "The Solution of Peening Residual Stress by Angled Impact of Multi Elliptical Shot Ball based on Finite Element Analysis", Journal of the Korean Society for Precision Engineering, 34(2), pp.151~156 (2017)
- K. J. HA, "A Study on Effect of Shot Peening on Fracture Toughness of Spring Steel", Journal of Power System Engineering, 7(2), pp.66~72 (2003)
- T. Patil, "Shot Peening Induced Corrosion Resistance of Magnesium Alloy WE43", Manufacturing Letters, 33, pp.190~194 (2022)
- A. KLUMPP, "Long Crack Propagation and Closure in DC(T)Specimen fo Ni-based Superalloy Inconel718 and Stainless Steel AISI 301 after Shot Peening", Engineering Fracture Mechanics, 269(15), pp.108551~ (2022)
- M. A. S TORRES, "An Evaluation of Shot Peening, Residual Stress and Stress Relaxation on the Fatigue Life of AISI 4340 Steel", Int. Fatigue, 24(8), pp.877~886 (2002)
- D. GLASER, "Evaluation of Laser Shock Peening Process Parameters Incorporating Almen Strip Deflections", Surface and Coatings Technology, 434, pp.128158~ (2022)
- G. HAMMERSLEY, "Surface Prestressing to Improve Fatigue Strength of Components by Laser Shot Peening", Optics and Lasers in Engineering, 34(4-6), pp.327~337 (2000)
- "SAE J442, Test Strip, Holder, and Gage for Shot Peening"[URL]
- J. W. KIM, "Research for Hydrogen Embrittlement Susceptibility of Hydrogen Charged Cryogenic Steels Part I : Hydrogen Charging", Journal of the Korean Society of Mechanical Technology, 23(5), pp.792~798 (2021)
- W. ZHANG, "Evaluation of Susceptibility to Hydrogen Embrittlement-A Rising Step Load Testing Method", Materials Sciences and Applications, 7, pp.389~395 (2016)
- C. M. PYO, "Research for Hydrogen Embrittlement Susceptibility of Hydrogen Charged Cryogenic Steels Part II : Evaluation of Mechanical Properties", Journal of the Korean Society of Mechanical Technology, 23(6), pp.958~966 (2021)
- K. S. KIM, "Effect of Grain Boundary Carbide on Hydrogen Embrittlement in Stable Austenitic Stainless Steels", ISIJ International, 59(6), pp.1136~1144 (2019)
- B. HASHEMI, "The Wear and Corrosion Resistance of Shot Peened–Nitrided 316L Austenitic Stainless Steel", Materials & Design, 32(6), pp.3287~3292 (2011)
- H. HOTZ, "Surface Layer Hardening of Metastable Austenitic Steel–Comparison of Shot Peening and Cryogenic Turning", Journal of Materials Research and Technology, 9(6), pp.16410~16422 (2020)
- V. HSIAO, "Surface Morphology and Human MG-63 Osteoblasic Cell Line Response of 316L Stainless Steel after Various Surface Treatments", Metals, 13(10), pp.17~ (2023)
- M. KAWAMORI, "Improved Hydrogen Embrittlement Resistance of Steel by Shot Peening and Subsequent Low-temperature Annealing", ISIJ Int, 61(4), pp.1159~1169 (2021)