횡방향 하중 전달 비율을 이용한 화물차 동적 안전성 예측
Predicting the Dynamic Safety of Heavy Vehicleusing the Lateral Load Transfer Ratio
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this paper, we propose a dynamic stability prediction method for heavy vehicles based on Lateral Load Transfer Ratio. The key factors influencing vehicle roll motion are the vehicle's load, the position of the center of mass, the tread and the vehicle speed. Using these factors, we derive the lateral load transfer ratio (LTR) formula. In addition, we investigated LTR changes and vehicle rollover of heavy vehicles in various scenarios using TruckSim. As a result, the threshold value of the change rate of the LTR at which the vehicle rolls over was 0.68-0.72. Finally, we performed a numerical experiment to prevent rollover by calculating the optimal speed in the rollover situation.
Abstract
In this paper, we propose a dynamic stability prediction method for heavy vehicles based on Lateral Load Transfer Ratio. The key factors influencing vehicle roll motion are the vehicle's load, the position of the center of mass, the tread and the vehicle speed. Using these factors, we derive the lateral load transfer ratio (LTR) formula. In addition, we investigated LTR changes and vehicle rollover of heavy vehicles in various scenarios using TruckSim. As a result, the threshold value of the change rate of the LTR at which the vehicle rolls over was 0.68-0.72. Finally, we performed a numerical experiment to prevent rollover by calculating the optimal speed in the rollover situation.
참고문헌 (11)
- "Traffic Accident Analysis System" (2021)[URL]
- K. D. Sung, "Analysis of SUV Rollover due to Tire Characteristic Factors", AUTO JOURNAL : Journal of the Korean Society of Automotive Engineers, 31(3), pp.36~46 (2009)
- 박승운, "다물체 동역학 시뮬레이션을 통한 버스의 전복 시험 규정과 안전성 평가에 관한 고찰", 드라이브·컨트롤, 19(3), pp.39~46 (2022), 사단법인 유공압건설기계학회
- J. Y. Yoon, "Development of ITS-based Vehicle Rollover Prediction and Prevention Algorithm", KSAE 2009 ANNUAL AUTUMN CONFEENCE & EXHIBITION, pp.2024~2031 (2009)
- D. W. Lee, "A Study on the Roll Angle Estimation with Suspension Displacement and Lateral Acceleration", KSAE 2014 ANNUAL SPRING CONFEENCE, pp.797~798 (2014)
- Y. Chen, "Effect of off-centred loading on roll stability of multi-trailer trucks", International Journal of Vehicle Performance, 8(2, pp.3) (2022), 271~295
- Y. Lu, "Sliding mode control for overturning prevention and hardware-in-loop experiment of heavy-duty vehicles based on dynamical load transfer ratio prediction", J Multi-body Dynamics, 236(1), pp.68~83 (2022)
- G. Rill, "Road Vehicle Dynamics", pp.296~ (2021), CRC Press
- H. Imine, "Rollover risk prediction of an instrumented heavy vehicle using high order sliding mode observer", 2009 IEEE International Conference on Robotics and Automation, pp.64~69 (2009)
- H. Li, "Design of an improved predictive LTR for rollover warning systems", Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39, pp.3779~3791 (2017)
- 임창식, "노면 포장별 차량의 제동경과시간 및 마찰계수에 관한 실험적 연구", 대한토목학회 논문집D, 30(6), pp.587~597 (2010), 대한토목학회