저발열량 가스 연료의 비예혼합화염의 오염 물질 배출 특성에 관한 수치해석 연구
Numerical Study on Characteristics of Pollutant Emission for Non-premixed Flames with Low Calorific Value Gases
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The characteristics of pollutant emission for non-premixed flames with LCG 8000 and LCG 6000 represented as low calorific gases were investigated by numerical simulation. Commercial software (ANSYS 16.2 - FLUENT) is used to predict 2-D pollutant emission with GRI 3.0 detailed reaction mechanism. In addition, the addition of hydrogen to LCG 6000 was also considered. As result, the flame length and temperature of LHVGs were decreased with decreasing calorific value at the same condition. In addition, NO concentration was decreased as temperature decreased. However, CO concentration for LCG 8000 predicted to be slightly higher than that for methane due to the high propane concentration. In the case of LCG 6000 with added hydrogen, the flame length was the shortest and NO concentration was the highest due to the highest flame temperature, but CO concentration decreased rapidly due to the addition of the carbon-free fuel.
Abstract
The characteristics of pollutant emission for non-premixed flames with LCG 8000 and LCG 6000 represented as low calorific gases were investigated by numerical simulation. Commercial software (ANSYS 16.2 - FLUENT) is used to predict 2-D pollutant emission with GRI 3.0 detailed reaction mechanism. In addition, the addition of hydrogen to LCG 6000 was also considered. As result, the flame length and temperature of LHVGs were decreased with decreasing calorific value at the same condition. In addition, NO concentration was decreased as temperature decreased. However, CO concentration for LCG 8000 predicted to be slightly higher than that for methane due to the high propane concentration. In the case of LCG 6000 with added hydrogen, the flame length was the shortest and NO concentration was the highest due to the highest flame temperature, but CO concentration decreased rapidly due to the addition of the carbon-free fuel.
참고문헌 (12)
- Chen Z, "Studies of radiation absorption on flame speed and flammability limit of CO2 diluted methane flames at elevated pressures", Proceedings of the Combustion Institute, 31, pp.2693~2700 (2007)
- Ratna Kishore V, "Measurement of adiabatic burning velocity in natural gas-like mixtures", Experimental Thermal and Fluid Science, 33, pp.10~16 (2008)
- Hermanns RTE, "Effects of temperature and composition on the laminar burning velocity of CH4+H2+O2+N2 flames", Fuel, 89, pp.114~121 (2010)
- Shin, C. H, "Combustion characteristics of coaxial nonpremixed flames for lowheating value gases", Energy, 165, pp.41~52 (2018)
- Shin, C. H, "Effect of hydrogen addition on flame stability and structure for low heating value coaxial nonpremixed flames", Combustion Science and Technology (2022)
- Kum, S. M., "Study on the burning velocity of low calorific fuels for premixed flames using cone angle method", Korean Society of Mechanical Technology, pp.321~326 (2020)
- Kum, S. M., "Study on combustion characteristics of premixed flames with low calorific value gas fuel", Korean Society of Mechanical Technology, pp.459~464 (2021)
- "ANSYS® Fluent. Release 16.2", ~ (2015)
- Smith, G. P., "GRI 3. 0 Mechanism", Gas Res Institute, ~ (2017)
- The Chemkin transport database, "Kee, R. J.", Sandia Natl Lab Livermore, ~, pp.Rep. No SAND86-8246 (1986)
- Kee, R. J., "The chemkin thermodynamic data base(No. SAND- 87-8215B)", Sandia National Labs. ISO 690, ~ (1990)
- Kee-Man Lee, "Effect of various gas compositions on gas interchangeability and combustion characteristics for domestic appliances", Journal of Mechanical Science and Technology, 27(4), pp.1191~1201 (2013), 대한기계학회[DOI]