AISI 1020 CD-Bar 절삭가공 시 절삭조건이 절삭면에 미치는 영향
Effect of Cutting Conditions on the Cutting Surface when Cutting AISI 1020 CD-Bar
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, in order to confirm the machining characteristics of AISI 1020 CD-Bar, cutting was performed after strength measurement, and surface roughness analysis was performed according to cutting conditions. Tensile strength was reduced by about 27.7% compared to AISI 1045 material, and Rockwell hardness HRC was reduced by 46.7%. The surface roughness measurement after cutting was divided into roughing, semi-finishing and finishing turning. In particular, in finishing machining, the best surface roughness was confirmed when the cutting speed was 150m/min and the depth of cut was 0.6mm based on the feed rate of 0.05mm/rev.
Abstract
In this study, in order to confirm the machining characteristics of AISI 1020 CD-Bar, cutting was performed after strength measurement, and surface roughness analysis was performed according to cutting conditions. Tensile strength was reduced by about 27.7% compared to AISI 1045 material, and Rockwell hardness HRC was reduced by 46.7%. The surface roughness measurement after cutting was divided into roughing, semi-finishing and finishing turning. In particular, in finishing machining, the best surface roughness was confirmed when the cutting speed was 150m/min and the depth of cut was 0.6mm based on the feed rate of 0.05mm/rev.
참고문헌 (8)
- 최종환, "선삭에서 절삭 속도 제어를 통한 표면 거칠기 향상", 한국기계가공학회지, 7(2), pp.23~30 (2008), 한국기계가공학회
- S. Y. Lee, "Effects of Cutting Conditions on Surface Roughness in Turning", Journal of the Korean Society for Precision Engineering, 18(8), pp.139~149 (2001)
- 이이선, "기계구조용 탄소강(SM20C)의 단속절삭 시 표면거칠기 예측", 한국기계기술학회지, 16(6), pp.2021~2026 (2014), 한국기계기술학회[DOI]
- 김영덕, "선삭가공에서 표면 거칠기에 미치는 냉각방법의 영향", 한국기계가공학회지, 10(3), pp.87~93 (2011), 한국기계가공학회
- J. H. Lee, "Study on Burr Formation and Tool Wear in Drilling CFRP and Its Hybrid Composites", Applied Sciences, 11, pp.384~ (2021)
- H. Aouici, "Comparison on various machinability aspects between mixed and reinforced ceramics when machining hardened steels", Mechanics & Industry, 20(1), pp.109~ (2019)
- I. S. Kang, "The effect of changing belt tension on the machining surface of a CNC lathe spindle", processes, 11, pp.1079~ (2023)
- Z. A. M. Tagiuri, "Numerical Prediction of the Performance of Chamfered and Sharp Cutting Tools during Orthogonal Cutting of AISI 1045 Steel", processes, 10, pp.2171~ (2022)