본문 바로가기
KERD
논문KCI 등재

머신러닝 기반 시설원예 개폐기가 예측 온·습도에 미치는 영향에 대한 연구

A Study on the Effect of the Horticultural Switchgear on the Predicted Temperature and Humidity of Machine Learning Infrastructure

0

조회

0

다운로드

0

인용

0

참고문헌

키워드

주제분류학제간연구

초록

본 논문에서는 전라남도 나주시에 있는 한 농가의 시설원예 스마트팜에서 2021년01월01일부터 2021년 6월 27일까지 약 7개월간의 1분 단위로 환경 자료를 수집한 것을 토대로 랜덤 포레스트 알고리즘을 활용하여 시설원예의 구동기 및 환경 데이터 특성들과의 온·습도의 상관관계를 구하여 온·습도에 어떠한 데이터 특성이 얼마나 많은 영향을 주는지 알아보고 한 시간 뒤의 온·습도의 예측값을 구하는 작업을 수행하였다. 시설원예의 구동기 및 환경 데이터 특성이 온·습도 변화에 영향을 주지만 그 중에서 영향을 많이 주지 않은 변수, 영향을 많이 주는 변수를 제거 함으로써 각각의 온·습도의 실제값과 예측값을 비교하였다. 이를 통해 얻은 결과로 온도와 습도 예측값은 top_moter 즉 천창 개폐기에 많은 영향을 받는다는 결과가 나왔다. 따라서 한 시간 뒤의 온도와 습도의 예측값은 개폐기의 구동 여부에 따라 많은 차이를 보이며 온도와 습도를 예측하기 위해서는 한 시간 전의 온도의 습도뿐만 아니라 개폐기의 구동여부가 필요하다는 것을 알 수 있다. 추후 연구에서는 많은 구동기 및 환경 데이터 특성과 다양한 알고리즘을 통해 더욱더 정확한 온·습도 예측을 할 예정이다.

Abstract

In this paper, based on the collection of environmental data in 1-minute increments for about 7 months from January 01, 2021 to June 27, 2021 in a facility horticultural smart farm of a farmhouse in Naju-si, Jeollanam-do, random forest algorithm was used to The correlation of temperature and humidity with the driver and environmental data characteristics of facility horticulture was obtained to find out which data characteristics have an influence on temperature and humidity, and to find the predicted value of temperature and humidity one hour later. Although the actuator and environmental data characteristics of facility horticulture affect the change in temperature and humidity, the actual and predicted values of each temperature and humidity were compared by removing variables that did not have much influence and variables that had much influence among them. As a result obtained through this, it was found that the predicted value of temperature and humidity is greatly influenced by the top_moter, that is, the skylight opener. Therefore, the predicted values of temperature and humidity one hour later vary greatly depending on whether the switch is operated or not, and it can be seen that to predict the temperature and humidity, not only the temperature and humidity of one hour ago, but also whether the switch is operated or not is required. In future research, we plan to predict more accurate temperature and humidity through many actuators and environmental data characteristics and various algorithms.

참고문헌 (20)

  1. E. J. Ju, "Prediction of temperature and relative humidity in dressroom using machine-learning", Architectural Institute of Korea, 39(1), pp.286~287 (2019)
  2. S. Y. Yoo, "A study on prediction of temperature and humidity for estimation of cooling and heating load", Society of Air-conditioning and refrigerating engineers of Korea, 19(5), pp.621~624 (2011)
  3. S. B. Jung, "Effects of vegetation on in door air quality", pp.996~999 (2018), Society of Air-conditioning and refrigerating engineers of Korea
  4. 이권호, "시계열 머신러닝 기법을 이용한 컬럼에어로솔 예측 및 평가", 한국대기환경학회지, 38(1), pp.57~73 (2022), 한국대기환경학회[DOI]
  5. 임준현, "머신러닝 기법을 이용한 변압기 주파수 응답 모델 파라미터 추정", 조명.전기설비학회논문지, 36(2), pp.8~13 (2022), 한국조명.전기설비학회
  6. C. K. Choi, "Machine learning-based battery temperature prediction using cloud computing platform", Proceedings of Symposium of the Korean Institute of communications and Information Sciences, pp.1088~1089 (2022)
  7. 김나은, "머신러닝 알고리즘을 이용한 온실 딸기 생산량 예측", 생물환경조절학회지, 31(1), pp.1~7 (2022), (사) 한국생물환경조절학회
  8. 노석범, "부분 방전 패턴 분류를 위한 랜덤 포레스트 기반 feature selection 기법을 적용한 방사형 기저함수 신경회로망 패턴 분류기 설계 및 응용", 한국지능시스템학회 논문지, 31(6), pp.526~532 (2021), 한국지능시스템학회[DOI]
  9. 방명환, "랜덤 포레스트 기반 머신러닝 모델을 이용한 가스터빈 압축기 성능저하 분석", 대한기계학회논문집 B, 45(11), pp.605~612 (2021), 대한기계학회
  10. 정재원, "랜덤 포레스트와 실내환경 측정 데이터를 이용한 주거공간에서의 재실감지모형", 전자공학회논문지, 58(9), pp.58~65 (2021), 대한전자공학회
  11. B. S Lee, "Current status of smart farm utilization of protected horticultural growers and suggestions for improvement", pp.54~54 (2019), HORTICULTURE ABSTRACTS
  12. H. Y. Jeong, "Optimal design plan for the introduction renewable energy sources for smart farm,", pp.1382~1383 (2020), Korean Electrical Society
  13. H. O. Choe, "Electrical signal measurement system design according to switch overload operation", Proceedings of Symposium of the Korean Institute of communications and Information Sciences, pp.987~988 (2022)
  14. M. Y. Huh, "Standardization trend on growth information of crops in smart greenhoues and field", Proceedings of Symposium of the Korean Institute of communications and Information Sciences, pp.210~211 (2021)
  15. G. H. Jung, "A study on the web server construction system for home smart pot database interworking", Proceedings of Symposium of the Korean Institute of communications and Information Sciences, pp.735~736 (2021)
  16. S. E. Park, "A study on the design of smart artificial intelligence flowerpot for cloud-based education", Proceedings of Symposium of the Korean Institute of communications and Information Sciences, pp.412~413 (2022)
  17. 양광호, "실내용 스마트재배시스템 기능구조 및 인터페이스 요구사항", 한국통신학회논문지, 47(3), pp.530~538 (2022), 한국통신학회[DOI]
  18. 홍기혜, "랜덤포레스트 머신러닝 알고리즘 기반 남·여 청소년의 자살생각 예측 및 분석", 한국사회복지학, 72(3), pp.157~180 (2020), 한국사회복지학회[DOI]
  19. 손기영, "지능형 전장인식을 위한 엣지 컴퓨팅 기반 인공지능 가속기 성능 분석", 전자공학회논문지, 59(7), pp.41~49 (2022), 대한전자공학회
  20. 김유선, "시계열 이미징 기법을 이용한 다변량 센서 데이터 분류", 정보과학회논문지, 49(8), pp.593~600 (2022), 한국정보과학회[DOI]

관련 논문AI추천

이 간행물의 다른 논문 (29건)