Microstructural Features of Multicomponent FeCoCrNiSix Alloys
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The microstructural features of FeCoCrNi, FeCoCrNiAl and FeCoCrNiSix (x=0, 5, 10, 15, 20) alloys have been investigated in the present study. The microstructure of FeCoCrNi alloy changes dramatically with equiatomic addition of Al. The fcc irregular shaped grain structure in the as-cast FeCoCrNi alloy changes into the bcc interconnected structure with phase separation of Al-Ni rich and Cr-Fe rich phases in the as-cast FeCoCrNiAl alloy. The microstructure of FeCoCrNi alloy changes with the addition of Si. With increasing the amount of Si, the fcc structure of the grains is maintained, but new phase containing higher amount of Si forms at the grain boundary. As the amount of Si increases, the fraction the Si-rich grain boundary phase increases.
Abstract
The microstructural features of FeCoCrNi, FeCoCrNiAl and FeCoCrNiSix (x=0, 5, 10, 15, 20) alloys have been investigated in the present study. The microstructure of FeCoCrNi alloy changes dramatically with equiatomic addition of Al. The fcc irregular shaped grain structure in the as-cast FeCoCrNi alloy changes into the bcc interconnected structure with phase separation of Al-Ni rich and Cr-Fe rich phases in the as-cast FeCoCrNiAl alloy. The microstructure of FeCoCrNi alloy changes with the addition of Si. With increasing the amount of Si, the fcc structure of the grains is maintained, but new phase containing higher amount of Si forms at the grain boundary. As the amount of Si increases, the fraction the Si-rich grain boundary phase increases.
참고문헌 (13)
- Cantor B, "Microstructural development in equiatomic multicomponent alloys", Mater. Sci. Eng. A, 375, pp.213~218 (2004)
- Chen T K, "Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering", Surf. Coat. Technol, 188-189, pp.193~200 (2004)
- Chen Y Y, "Microstructure and electrochemical properties of high entropy alloys- a comparison with type-304 stainless steel", Corr. Sci, 47, pp.2257~2279 (2005)
- Hsu C Y, "Wear resistance and high-temperature compression strength of fcc CuCoNiCrAl0.5Fe alloy with boron addition", Metall. Mater. Trans. A, 35, pp.1465~1469 (2004)
- Huang P K, "Multi-principalelement alloys with improved oxidation and wear resistance for thermal spray coating", Adv. Eng. Mater, 6, pp.74~78 (2004)
- Itabashi M, "Carbon content effect on high-strainrate tensile properties for carbon steels", Int. J. Impact Eng, 24, pp.117~131 (2000)
- Kondo M, "Corrosion resistance of Si- and Al-rich steels in flowing lead-bismuth", J. Nucl. Mater, 356, pp.203~212 (2006)
- Lin D Y, "Influence of Si content on the intergranular corrosion of SUS 309L stainless steels", Mater. Sci. Eng. A, 359, pp.396~401 (2003)
- Ranganathan S, "Alloyed pleasures: multimetallic cocktails", Curr. Sci, 85, pp.1404~1406 (2003)
- Wang F J, "Effect of Co addition on crystal structure and mechanical properties of Ti0.5CrFeNiAlCo high entropy alloy", Mater. Sci. Eng. A, 496, pp.214~216 (2008)
- Wang W R, "Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys", Intermetallics, 26, pp.44~51 (2012)
- Wu J M, "Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content", Wear, 261, pp.513~519 (2006)
- Yeh J W, "Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes", Adv. Eng. Mater, 6, pp.299~303 (2004)