입자의 형태적 특성을 활용한 퇴적물 입도분석
Grain Size Analysis Using Morphological Properties of Grains
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
Grain size analysis is the most basic procedure for identifying the origin, transport and sedimentation processes of sediments, and is widely used in geomorphology and sedimentology. Traditionally, grain size was determined by a sieve-pippette method, but the use of automated analyzers is increasing in recent years. These analyzers have many advantages over traditional techniques, but the measurement results are not always the same. It is still difficult to solve the pretreatment problem such as incomplete diffusion and residual organic matter, and inappropriate results may be obtained. This study compared image-based grain size analysis and sieve analysis to verify its statistical reliability, and conducted experiments to enhance the measurement accuracy using shape parameters. The results showed that the image-based analysis overestimated the grain size of sand dunes by about 7% compared to the sieve analysis, but the two measurements were not statistically different. In addition, by using shape parameters, such as aspect ratio, sphericity, and convexity, improved statistics were obtained compared to the original data. Using the morphological properties of the individual grains is a complementary method to the incomplete pretreatment of the grain size analysis process, and at the same time, it will contribute to improving the accuracy and reliability of the results.
Abstract
Grain size analysis is the most basic procedure for identifying the origin, transport and sedimentation processes of sediments, and is widely used in geomorphology and sedimentology. Traditionally, grain size was determined by a sieve-pippette method, but the use of automated analyzers is increasing in recent years. These analyzers have many advantages over traditional techniques, but the measurement results are not always the same. It is still difficult to solve the pretreatment problem such as incomplete diffusion and residual organic matter, and inappropriate results may be obtained. This study compared image-based grain size analysis and sieve analysis to verify its statistical reliability, and conducted experiments to enhance the measurement accuracy using shape parameters. The results showed that the image-based analysis overestimated the grain size of sand dunes by about 7% compared to the sieve analysis, but the two measurements were not statistically different. In addition, by using shape parameters, such as aspect ratio, sphericity, and convexity, improved statistics were obtained compared to the original data. Using the morphological properties of the individual grains is a complementary method to the incomplete pretreatment of the grain size analysis process, and at the same time, it will contribute to improving the accuracy and reliability of the results.
참고문헌 (17)
- Altuhafi, F, "Analysis of an image-based method to quantify the size and shape of sand particles", Journal of Geotechnical and Geoenvironmental Engineering, 139(8), pp.1290~1307 (2013)
- Beuselinck, L, "Grain-size analysis by laser diffractometry: comparison with the sievepipette method", Catena, 32(3-4), pp.193~208 (1998)
- Blott, S. J, "GRADISTAT: A grain size distribution and statistics package for the analysis of unconsolidated sediments", Earth Surface Processes and Landforms, 26, pp.1237~1248 (2001)
- Califice, A, "Influence of particle shape on size distribution measurements by 3D and 2D image analyses and laser diffraction", Powder Technology, 237, pp.67~75 (2013)
- Choi, K. H, "Reconstruction of Holocene coastal progradation on the east coast of Korea based on OSL dating and GPR surveys of beach-foredune ridges", The Holocene, 24(1), pp.24~34 (2014)
- 최광희, "원산도 해안사구 퇴적층에 대한 OSL 연대측정과 그 의미", 한국지형학회지, 15(4), pp.39~51 (2008), 한국지형학회
- Di Stefano, C, "Comparison between grain-size analyses using laser diffraction and sedimentation methods", Biosystems engineering, 106(2), pp.205~215 (2010)
- 김민준, "세 방향 레이저 회절방식을 채용한 Microtrac 입도분석기의 퇴적학적 활용 가능성: 체질-피펫 분석법과 입도비교", 지질학회지, 46(3), pp.197~205 (2010), 대한지질학회
- Mason, J. A, "Laser diffraction analysis of the disintegration of aeolian sedimentary aggregates in water", Catena, 87(1), pp.107~118 (2011)
- Romano, E, "Grain size of marine sediments in the environmental studies, from sampling to measuring and classifying", A critical review of the most used procedures, Acta Imeko, 7(2), pp.10~15 (2018)
- Scott-Jackson, J. E, "Methodological issues raised by laser particle size analysis of deposits mapped as Clay-withflints from the Palaeolithic site of Dickett’s Field, Yarnhams Farm, Hampshire, UK", Jouranl of Archaeological Science, 32, pp.969~980 (2005)
- 신원정, "우이도 해안사구의 지형특성과 형성과정", 한국지형학회지, 24(2), pp.1~13 (2017), 한국지형학회
- Tucker, M, "Techniques in Sedimentology", pp.394~ (1988), Blackwel
- Walton, W. H, "Feret’s statistical diameter as a measure of particle size", Nature, 162(4113), pp.329~330 (1948)
- Wentworth, C. K, "Methods of Mechanical Analysis of Sediments", pp.52~ (1920), University of Iowa
- 윤순옥, "레이저 회절 입도분석기를 이용한 사질 시료의 입도분석에 있어서전처리 및 굴절율과 흡수율의 영향", 대한지리학회지, 48(6), pp.819~836 (2013), 대한지리학회
- 윤순옥, "뢰스-고토양 퇴적물의 전처리 과정에 따른 입도분석 결과 비교", 대한지리학회지, 45(5), pp.553~572 (2010), 대한지리학회