본문 바로가기
KERD
논문KCI 등재

인접구조물의 진동제어를 위한 선형감쇠시스템의 최적설계

Optimal Design of Linear Viscous Damping Systemfor Vibration Control of Adjacent Building Structures

고현무|박관순|옥승용
한국지진공학회|2006.06|한국지진공학회논문집 (Jorunal of the Earthquake Engineering Society of Korea)|제10권 제3호|pp. 85-100

0

조회

0

다운로드

13

인용

0

참고문헌

키워드

sensitivity민감도지진응답제어seismic response control인접구조물adjacent structureslinear viscous damper선형점성감쇠기최적감쇠용량구조물충돌optimal damping capacitystructural pounding
주제분류토목공학

초록

논문에서는 서로 다른 층높이를 갖는 인접한 두 빌딩의 내진성능을 효율적으로 향상시킬 수 있는 선형 점성 감쇠기의 최적 설계방법을 제시하고자 한다. 이를 위하여 층간 대각 브레이싱 형태의 에너지 소산장치 연결방법과 인접 구조물간 에너지 소산장치 연결방법을 고려하였으며, 두 가지 연결방법을 적용한 시스템에 대한 감쇠용량별 주파수응답함수 비교를 통하여 구조물간 연결방법의 효율성을 확인하였다. 아울러 구조물간 연결방법에서 주파수응답함수를 최소화하는 최적 감쇠용량이 존재하는 것을 보이고, 최적 설계된 시스템에 대하여 감쇠용량별 구조물의 고유주파수 및 등가감쇠비의 민감도를 분석하였다. 민감도 분석 결과로부터 고층부에 설치되는 에너지 소산장치가 구조물의 등가 감쇠비를 효율적으로 증가시키는 것을 확인하였다. 따라서 민감도에 비례하는 새로운 감쇠기 설계방법을 제시하고, 대각 브레이싱 연결방법과 구조물간 연결로서 균등분포 및 제시하는 민감도 기반 분포에 따른 연결방법을 적용한 시스템들의 내진성능을 비교분석하였다. 지진응답의 비교결과, 제시하는 방법이 인접 구조물의 효과적인 내진설계방법이 될 수 있음을 입증하였다.

Abstract

paper proposes an optimal design method of linear viscous dampers for the seismic performance of two adjacent structures with different heights. Accordingly, connection method using diagonal bracing between two floors and connection method between two structures are considered, and the effectiveness of the latter method is confirmed through the comparison of the frequency response functions with respect to damping capacity. Moreover, optimal damping to minimize the response of the adjacent structures in the frequency domain is found. The sensitivity of natural frequency and modal damping according to the damper capacity at each floor is obtained for the optimally designed system. From the sensitivity analysis, the modal damping is evaluated to be very sensitive to the damper installed at higher floor. Therefore, sensitivity-based damping distribution method is proposed. Diagonal bracing connection method, uniform distribution method and sensitivity-based distribution method are compared to each other in terms of seismic performance. The comparative results demonstrate that the proposed method is an effective seismic design method for the adjacent structures.

참고문헌 (45)

  1. "National Academy of Sciences The Great Alaska Earthquake of 1964" (1964)
  2. "Response of the Olive View Hospital Main Building during the San Fernando earthquake University of California" (1976)
  3. "Observations on Structural Pounding" (1987)
  4. "Earthquake of August 17" (2000)
  5. "Engineering Features of the San Fernando Earthquake of February 9 California Institute of Technology" (1971)
  6. "Seismic Design and Retrofit of Bridges" (1996)
  7. "Northridge Earthquake of January 17", 1 (1995)
  8. "The Hyogo-Ken Nanbu Earthquake Reconnaissance Report" (1995), Comartin C. D. Greene M. and Tubbesing S. K.
  9. "Earthquake of September 21" (2001)
  10. "Earthquake of February 28" (2001)
  11. "India Earthquake of January 26" (2002)
  12. "On eccentric seismic pounding of symmetric buildings", 25, pp.1996~ (1996)
  13. "Investigation of a method to stabilize wind induced oscillations in large structures", new york (1972)
  14. "Effect of dynamic tuned connector on reduction of seismic response application to adjacent office buildings Proceedings of the 9th World Conrerence on Earthquake Engineering", v, pp.773~778 (1988)
  15. "The dynamics of interstructural connections to prevent pounding", 18, pp.1989~ (1989)
  16. "Coupling tall buildings for control of response to wind Proc. 6th Int. Conf. on Structural Safety and Reliability", pp.1553~1560 (1994), Balkema Publishers
  17. "Optimal design of damping devices for vibration control of parallel structures", 2, pp.1996~ (1996)
  18. "Bending and torsional vibration control of Mexible structures arranged in parallel", 3, pp.12~17 (1996)
  19. "Dynamic characteristics and seismic response of adjacent buildings linked by discrete dampers", 28(10), pp.1999~ (1999)
  20. "Dynamic response of damper-connected adjacent buildings under earthquake excitation", 21, pp.1999~ (1999)
  21. "Vibration analysis of two buildings linked by Maxwell Model-defined fluid dampers", 233, pp.775~796 (2000)
  22. "A study of response control on the passive coupling element between two parallel structures", 9, pp.383~396 (2000)
  23. "Random seismic response analysis of adjacent buildings coupled with non-linear hysteretic dampers", (3), pp.2001~ (2001)
  24. "Use of a shared tuned mass damper to reduce vibration and pounding in adjacent structures", 30, pp.1185~1201 (2001)
  25. "Harmonic response of adjacent structures connected with a friction damper", 292, pp.710~725 (2006)
  26. "Semi-active control of wind induced oscillations Proc. 2nd International Conference on Structural Control University of Waterloo", pp.354~369 (1985)
  27. "New control algorithms for structural control Journal of Enginnering Mechanics", 113(9), pp.1987~ (1987)
  28. "Active vibration control of structures arranged in parallel", japan, pp.146~151 (1992)
  29. "Active control of structures using the joint member with negative stiffness Proceedings of the 1st World Conference on Structural Control", 2, pp.41~49 (1994)
  30. "Control of the seismic response of adjacent structures Proc. Ist World Conf. on Structural Control", 2, pp.21~30 (1994)
  31. "A structural vibration control method of flexible buildings in response to large earthquakes and strong winds", hong kong, pp.490~496 (1996)
  32. "Vibration control of multiple building structures connected with active bridges", 1, pp.1999~ (1999)
  33. "Seismic response of adjacent buildings connected by active tendon devices", 3671, pp.217~228 (1999)
  34. "Coupled building control using active and smart damping strategies" (1999)
  35. "Closed-form solution for seismic response of adjacent buildings with linear quadratic Gaussian controllers", 31, pp.235~259 (2002)
  36. "Studies of the vibration control method of parallel structures", no. 86-0247a, pp.1986~ (1986)
  37. "A study on optimum damping systems for connected double frame structures Proceedings of the 1st world Conference on Structural Control", 1, pp.32~39 (1994)
  38. "A study on optimum design of joint dampers connecting two towers: the case of connecting two same height towers at multiple points", 2, pp.1463~1472 (1999)
  39. "Optimal damping between two adjacent elastic structures", 7(7), pp.1998~ (1998)
  40. "Dynamics of structures theory and applications to earthquake engineering", pp.424~ (1995), Prentice Hall
  41. "Linear system theory and design", pp.16~ (1999), Oxford university press
  42. "Dynamics of structures" (1964), Prentice-Hall
  43. "Simulation of stochastic processes by spectral representation", 44(4), pp.1991~ (1991)
  44. "Standard Specifications for Highway Bridges" (2002), AASHTO
  45. "Standard Specifications for Highway Bridges American Association of State Highway and Transportation Officials" (2002), AASHTO

관련 논문AI추천

선형 점성 감쇠기가 장착된 인접구조물의 진동제어를 위한 유전자 알고리즘 기반 최적설계고현무, 김동석, 박관순, 옥승용한국지진공학회 · 한국지진공학회논문집2007 · 제11권 제1호추계학적 선형화 방법 및 다목적 유전자 알고리즘을 이용한 지진하중을 받는 인접 구조물에 대한 비선형 감쇠시스템의 최적 설계고현무, 박관순, 송준호, 옥승용한국지진공학회 · 한국지진공학회논문집2007 · 제11권 제6호지진하중을 받는 다층 건물에 설치된 마찰감쇠기 설계민경원, 성지영한국전산구조공학회 · 한국전산구조공학회논문집2011 · 제24권 제4호SKY-BRIDGE로 연결된 건물의 진동제어김진구, 류진국한국전산구조공학회 · 한국전산구조공학회논문집2004 · 제17권 제2호MR 감쇠기의 준능동 퍼지제어기법을 이용한 인접구조물의 지진응답제어김민섭, 박관순, 옥승용한국지진공학회 · 한국지진공학회논문집2009 · 제13권 제3호건축구조물의 층전단력 분포에 기초한 마찰감쇠기의 최적설계민경원, 박지훈, 이루지, 이상현한국지진공학회 · 한국지진공학회논문집2005 · 제9권 제6호

이 간행물의 다른 논문 (13건)

에너지 소산장치를 장착한 사장교의 지진 취약도 해석최현석, 박원석, 김동석, 고현무pp. 1-11변압기의 병렬 운전을 고려한국내 345kV 초고압 전력망의 지진 재해 신뢰성 평가박영준, 고현무, 박원석, 조호현pp. 13-20비선형 유한요소해석을 이용한철근콘크리트 교각의 내진성능평가신현목, 김태훈pp. 21-33병렬 FEM 모형을 이용한 1993년 동해 지진해일 시뮬레이션홍성진, 최병호, 에핌 페리놉스키pp. 35-45이축반복하중을 받는 2주형 철근콘크리트 교각의 내진성능과 보강박창규, 이호율, 정영수pp. 47-55
원문 보기