RC교각을 이용한 실시간 하이브리드 실험 시스템의 적용성 연구
Verification of Real-time Hybrid Test System using RC Pier Model
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Structure behaviors resulting from an earthquake are experimentally simulated mainly through a shaking table test. As for large-scale structures, however, size effects over a miniature may make it difficult to assess actual behaviors properly. To address this problem, research on the hybrid simulation is being conducted actively. This method is to implement numerical analysis on framework members that affect the general behavior of the structure dominantly through an actual scale experiment and on the rest parts by applying the sub- structuring technique. However, existing studies on hybrid simulation focus mainly on Slow experimental methods, which are disadvantageous in that it is unable to assess behaviors close to the actual level if material properties change depending on the speed or the influence of inertial force is significant. The present study aims to establish a Real-time hybrid simulation system capable of excitation based on the actual time history and to verify its performance and applicability. The hybrid simulation system built up in this study utilizes the ATS Compensator system, CR integrator, etc. in order to make the target displacement the same with the measured displacement on the basis of MATLAB/Simulink. The target structure was a 2-span bridge and an RC pier to support it was produced as an experimental model in order for the shaking table test and Slow and Real-time hybrid simulations. Behaviors that result from the earthquake of El Centro were examined, and the results were analyzed comparatively. In comparison with the results of the shaking table test, the Real-time hybrid simulation produced more similar maximum displacement and vibration behaviors than the Slow hybrid simulation. Hence, it is thought that the Real-time hybrid simulation proposed in this study can be utilized usefully in seismic capacity assessment of structural systems such as RC pier that are highly non-linear and time-dependent.
Abstract
Structure behaviors resulting from an earthquake are experimentally simulated mainly through a shaking table test. As for large-scale structures, however, size effects over a miniature may make it difficult to assess actual behaviors properly. To address this problem, research on the hybrid simulation is being conducted actively. This method is to implement numerical analysis on framework members that affect the general behavior of the structure dominantly through an actual scale experiment and on the rest parts by applying the sub- structuring technique. However, existing studies on hybrid simulation focus mainly on Slow experimental methods, which are disadvantageous in that it is unable to assess behaviors close to the actual level if material properties change depending on the speed or the influence of inertial force is significant. The present study aims to establish a Real-time hybrid simulation system capable of excitation based on the actual time history and to verify its performance and applicability. The hybrid simulation system built up in this study utilizes the ATS Compensator system, CR integrator, etc. in order to make the target displacement the same with the measured displacement on the basis of MATLAB/Simulink. The target structure was a 2-span bridge and an RC pier to support it was produced as an experimental model in order for the shaking table test and Slow and Real-time hybrid simulations. Behaviors that result from the earthquake of El Centro were examined, and the results were analyzed comparatively. In comparison with the results of the shaking table test, the Real-time hybrid simulation produced more similar maximum displacement and vibration behaviors than the Slow hybrid simulation. Hence, it is thought that the Real-time hybrid simulation proposed in this study can be utilized usefully in seismic capacity assessment of structural systems such as RC pier that are highly non-linear and time-dependent.
참고문헌 (26)
- 조성민, "소형선형 평면뼈대모형의 진동대실험을 통한하이브리드실험 기법의 검증", 한국지진공학회논문집, 14(6), pp.33~43 (2010), 한국지진공학회
- Hakuno M, "Dynamic Destructive Test of a Can- tilever Beam, Controlled by an Analog-computer", Transactions of the Japan Society of Civil Engineers, 1969(171), pp.1~9 (1969)
- Takanashi K, "Non-linear Earthquake Response Analysis of Structures by a Computer Actuator On-line System (details of system)", Transactions of the Architectural Institute of Japan, 229, pp.77~83 (1975)[DOI]
- Takanashi K, "Japanese Activities on Online Testing", Journal of Engineering Mechanics, 113(7), pp.1014~1032 (1987)[DOI]
- Experimental Error Propagation in Pseudodynamic Testing, "Shing PB", Earthquake Engineering Research Institute. University of California, ~, pp.UCB (1983), EERC-83[DOI]
- Tanaka H, "A Computer-actuator On-line System for Non-linear Earthquake Response Analysis of Structures", Journal of the Industrial Science, 27, pp.15~19 (1975)
- Hybrid Solution Techniques for Generalized Pseudodynamic Testing, "Thewalt CR", Earthquake Engineering Research Institute. Univercity of California, ~, pp.UBC (1987), EERC-87[DOI]
- Nakashima M, "Integration Techniques for Substructure Pseudodynamic Test", Proc. of the 4th U.S. National Conference on Earthquake Engineering, 2, pp.515~524 (1990)
- Shing PB, "Implicit Algorithm for Pseudodynamic Tests: Convergence and Energy Dissipation", Earthquake Engineering and Structural Dynamics, 20(9), pp.809~819 (1991)[DOI]
- Nakashima M, "Pseudo-dynamic Testing using Conventional Testing Devices", Earthquake Engineering and Structural Dynamics, 24(10), pp.1409~1422 (1995)[DOI]
- Nakashima M, "Real-time On-line Test for MODF Systems", Earthquake Engineering and Structural Dynamics, 28(4), pp.393~420 (1999)[DOI]
- Nakashima M, "Development, Potential, and Limitations of Realtime Online (Pseudo-dynamic) Testing", Philosophical Transactions of the Royal Society of London A, 359(1786), pp.1851~1867 (2001)[DOI]
- Zhao J, "Considerations for the Development of Real-time Dynamic Testing using Servo-hydraulic Actuation", Earthquake Engineering and Structural Dynamics, 32(11), pp.1773~1794 (2003)[DOI]
- Jung RY, "Performance Evaluation of a Real-time Pseudodynamic Test System", Earthquake Engineering and Structural Dynamics, 35(7), pp.789~810 (2006)[DOI]
- Chen C, "Development and Numerical Simulation of Hybrid Effective Force Testing Method", Ph.D., pp.2007
- Chae Y, "Adaptive Time Series Compensator for Delay Compensation of Servo-hydraulic Actuator Systems for Real-time Hybrid Simulation", Earthquake Engineering and Structural Dynamics, 42(11), pp.1697~1715 (2013)[DOI]
- Reinhorn AM, "Real-time Dynamic Hybrid Testing of Structural System", Proc. of the 13th World Conference on Earthquake Engineering (2004)
- Shao X, "Real-time Hybrid Simulation using Shake Tables and Dynamic Actuators", Journal of structural Engineering, 137(7), pp.748~760 (2011)[DOI]
- Kim DW, "Development of The Remote Hybrid Experiment and Collaboration Tool in Civil Engineering Collaboratory", Master, pp.2012
- Choi IG, "Development and Verification of Hybrid Test System using Small Column Model", Master, Civil and Environmental Engineering, pp.2009
- 강대흥, "고정반복법에 의한 암시적 HHT 시간적분법을 이용한 철근콘크리트 골조구조물의 실시간 하이브리드실험", 한국지진공학회논문집, 15(5), pp.11~24 (2011), 한국지진공학회
- Lee JJ, "Evaluation of Applicability and Reliability for Hybrid Testing", Master, Civil Engineering, pp.2012
- 김세훈, "강 뼈대 구조물의 단자유도 하이브리드 동적 실험", 한국철도학회논문집, 15(4), pp.413~421 (2012), 한국철도학회
- 나옥빈, "병렬 제어알고리즘과 최적 하이브리드 시스템을 적용한 실시간 구조물 동적실험", 한국방재학회논문집, 12(5), pp.63~73 (2012), 한국방재학회
- Park MS, "Seismic Performance Evaluation of Small RC Bridge Model using Improved Hybrid Test System", Master, Civil and Environmental Engineering, pp.2015
- Park JW, "Study on the Development of Pseudo Dynamic Hybrid Seismic Response Simulation System", Master, Architectural Engineering, pp.2016