철근콘크리트 원형 교각의 전단성능에 대한 횡방향철근의 영향
Effect of Transverse Steel on Shear Performance for RC Bridge Columns
2
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In seismic design, hollow section concrete columns offer advantages by reducing the weight and seismic mass compared to concrete section RC bridge columns. However, the flexure-shear behavior and spirals strain of hollow section concrete columns are not well-understood. Octagonal RC bridge columns of a small-scale model were tested under cyclic lateral load with constant axial load. The volumetric ratio of the transverse spiral hoop of all specimens is 0.00206. The test results showed that the structural performance of the hollow specimen, such as the initial crack pattern, initial stiffness, and diagonal crack pattern, was comparable to that of the solid specimen. However, the lateral strength and ultimate displacement of the hollow specimen noticeably decreased after the drift ratio of 3%. The columns showed flexure-shear failure at the final stage. Analytical and experimental investigations are presented in this study to understand a correlation confinement steel ratio with neutral axis and a correlation between the strain of spirals and the shear resistance capacity of steel in hollow and solid section concrete columns. Furthermore, shear strength components (Vc, Vs., Vp) and concrete stress were investigated.
Abstract
In seismic design, hollow section concrete columns offer advantages by reducing the weight and seismic mass compared to concrete section RC bridge columns. However, the flexure-shear behavior and spirals strain of hollow section concrete columns are not well-understood. Octagonal RC bridge columns of a small-scale model were tested under cyclic lateral load with constant axial load. The volumetric ratio of the transverse spiral hoop of all specimens is 0.00206. The test results showed that the structural performance of the hollow specimen, such as the initial crack pattern, initial stiffness, and diagonal crack pattern, was comparable to that of the solid specimen. However, the lateral strength and ultimate displacement of the hollow specimen noticeably decreased after the drift ratio of 3%. The columns showed flexure-shear failure at the final stage. Analytical and experimental investigations are presented in this study to understand a correlation confinement steel ratio with neutral axis and a correlation between the strain of spirals and the shear resistance capacity of steel in hollow and solid section concrete columns. Furthermore, shear strength components (Vc, Vs., Vp) and concrete stress were investigated.
참고문헌 (16)
- Whittaker D, "Experimental Tests on hollow circular concrete columns for use in offshore concrete platforms", Proceedings of the 3rd Pacific Conference on Earthquake Engineering (1987)
- Zahn FA, "Flexural strength and ductility of circular hollow reinforced concrete columns without confinement on inside face", ACI Structural Journal, 87(2), pp.156~166 (1990)
- 김태훈, "중공원형 철근콘크리트 교각의 횡방향철근에 따른 내진성능평가", 한국지진공학회논문집, 16(1), pp.13~26 (2012), 한국지진공학회
- 선창호, "횡방향철근이 감소된 중공사각단면 교각의 내진거동 특성", 한국지진공학회논문집, 13(3), pp.51~65 (2009), 한국지진공학회
- 고성현, "나선철근으로 횡구속된 정사각형 RC 기둥의 내진성능", 한국구조물진단유지관리공학회 논문집, 16(5), pp.88~97 (2012), 한국구조물진단유지관리공학회
- 고성현, "나선철근 간격에 따른 중공 원형 RC 기둥의 파괴거동", 한국구조물진단유지관리공학회 논문집, 20(6), pp.46~55 (2016), 한국구조물진단유지관리공학회
- 고성현, "축방향철근비 2.017%인 중공 원형 RC 기둥의 내진성능과 휨 초과강도", 한국구조물진단유지관리공학회 논문집, 21(1), pp.1~8 (2017), 한국구조물진단유지관리공학회
- Seismic performance of circular hollow columns subjected to high shear, "Ranzo G", University of California, ~, pp.SSRP 2001
- Ministry of Land, Infrastructure and Transport, "Seismic Design Standard for Bridge (KDS 24 17 11)", MOLIT, ~ (2019)
- Shear Strength and Deformability of RC Bridge Columns Subjected to Inelastic Cyclic Displacement, "Aschheim M", Earthquake Engineering Research Center. University of California at Berkeley, ~, pp.Report No. UCB (1992), EERC 92[DOI]
- CALTRANS, "Caltrans Seismic Design Criteria. Version 1.3", California Department of Transportation, ~ (2002)
- Priestley MJN, "Seismic Design and Retrofit of Bridges", pp.338~433 (1996), John Wiley & Sons Inc
- Korean Agency for Technology and Standards, "Method of tensile test for metallic materials - KS B 0802", KATS, ~ (2018)
- Korean Agency for Technology and Standards, "Standard Test Method for Compressive Strength of Concrete - KS F 2405", KATS, ~ (2017)
- Priestley MJN, "Seismic Performance of Circular Columns with Low Longitudinal Reinforcement Ratios", ACI Structural Journal, 93(4), pp.474~484 (1996)
- Montejo LA, "Seismic Behavior of Shear-Dominated Reinforced Concrete Columns at Low Temperatures", ACI Structural Journal, 106(4), pp.445~454 (2009)