방진층을 설치한 주거용 건축물 바닥판의 진동해석을 위한 효율적인 해석모형
An Efficient Analytical Model for Floor Vibrations in Residential Buildings with Damping layer
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
연구의 목적은 방진층을 가진 바닥판을 포함한 건축물의 동적해석을 위하여 효율적인 모형화 방법과 이에 대한 해석법을 제안하는 것이다. 이를 위하여 방진층을 포함한 바닥판의 모형화를 위하여 바닥슬래브와 상부 마감층을 각각 독립적으로 모형화하고 이들 사이에 방진층을 의미하는 스프링 요소를 사용하였으며 방진층의 감쇠에 의한 비비례 문제를 해결하기 위하여 Newmark-β법을 적용하여 동적해석을 수행하였다. 상하부를 각각 모형화함으로서 방진층 상하부의 재료적 차이에 의한 감쇠거동을 정확하게 모형화할 수 있었다.
Abstract
floor impact sound insulations are installed frequently for reducing the floor impact sound into the floor slab of the residential buildings in recent years. Therefore the analytical FE model considering the insulation is needed for the sound and vibration analysis of the floor and it is necessary to use a refined finite element model for considering the large number of modes involved dynamic responses. So it is very difficult to use FE model because of the tiresome task for constructing the FE model, taking a lot of times for analysis and the impossibility of using the proportional damping. The efficient analysis and modeling method are proposed to the dynamic analysis for the floor with damping layer in this study. The floor slabs and finished layers are modeled individually and the spring elements that mean damping layers used to connect two parts. The dynamic analysis by the Newmark-β method is performed to solve the non-proportional damping problem due to the damping coefficient of insulations.
참고문헌 (19)
- "Vibration Analysis of Beams with Multiple Constrained Layer Damping Patches", 212(5), pp.1998~ (1998)
- "Complex Eigensolutions of Rectangular Plates with Damping Patches", 216(1), pp.1998~ (1998)
- "Modeling and Vibration Control of Beams with Partially Debonded Active Constrained Layer Damping Patch", 252(3), pp.2002~ (2002)
- "Finite Element Analysis of Composite Structures with Smart Constrained Layer Damping", (3-6), pp.1998~ (1998)
- "Impact Sound Transmission through a Floating Floor on a Concrete Slab", 59, pp.353~372 (2000)
- "Mass Condensation a Semi- Automatic Method for Reducing the Size of Vibration Problems", 1, pp.333~349 (1969)
- "Accurate Reduction of Stiffness and Mass Matrices for Vibration Analysis and a Rational for Selecting Master Degrees of Freedom", asme, pp.1980~ (1980)
- "Analytical Selection of Masters for Reduced Eigenvalue Problems", 18, pp.89~98 (1982)
- "SAP2000-Integrated Finite Element Analysis and Design of Structures Users Manual." (1998), Computers & Structures Inc.
- "벽식구조물의 효율적인 연직진동해석", 제 6호, pp.55~66 (2004)
- "FINITE ELEMENTS FOR STRUCTURAL ANALYSIS", pp.77 205~82 209 (1984), Prentice-Hall Inc.
- "THE FINITE ELEMENT METHOD Using MATLAB", pp.77 370~82 401 (2000), CRC Press
- "Vibration in Structures" (1987)
- "Field measurements of impact sound insulation of floors", pp.~7 (1998)
- "고차의 진동하중을 받는 건축물 바닥판의 효율적인 바닥진동해석"
- "STRESSES IN PLATES AND SHELLS", pp.253~280 (1999), Mcgraw-Hill
- "Structural Dynamics by Finite Elements" (1987), Prentice-Hall Inc.
- "Engineering Vibration" (2001), Prentice Hall
- "Engineering Vibration" (2001), Prentice Hall