초탄성 형상기억합금 능동제어 가새시스템을 이용한 중 심가새프레임 구조물의 지진거동 및 복원성능 평가
Seismic Behavior and Recentering Capability Evaluation of Concentrically Braced Frame Structures using Superelastic Shape Alloy Active Control Bracing System
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
The researches related to active control systems utilizing superelastic shape memory alloys (SMA) have been recently conducted to reduce critical damage due to lateral deformation after severe earthquakes. Although Superelastic SMAs undergo considerable inelastic deformation, they can return to original conditions without heat treatment only after stress removal. We can expect the mitigation of residual deformation owing to inherent recentering characteristics when these smart materials are installed at the part where large deformation is likely to occur. Therefore, the primary purpose of this research is to develop concentrically braced frames (CBFs) with superelastic SMA bracing systems and to evaluate the seismic performance of such frame structures. In order to investigate the inter-story drift response of CBF structures, 3- and 6-story buildings were design according to current design specifications, and then nonlinear time-history analyses were performed on numerical 2D frame models. Based on the numerical analysis results, it can be comparatively verified that the CBFs with superelastic SMA bracing systems have more structural advantages in terms of energy dissipation and recentering behavior than those with conventional steel bracing systems.
Abstract
The researches related to active control systems utilizing superelastic shape memory alloys (SMA) have been recently conducted to reduce critical damage due to lateral deformation after severe earthquakes. Although Superelastic SMAs undergo considerable inelastic deformation, they can return to original conditions without heat treatment only after stress removal. We can expect the mitigation of residual deformation owing to inherent recentering characteristics when these smart materials are installed at the part where large deformation is likely to occur. Therefore, the primary purpose of this research is to develop concentrically braced frames (CBFs) with superelastic SMA bracing systems and to evaluate the seismic performance of such frame structures. In order to investigate the inter-story drift response of CBF structures, 3- and 6-story buildings were design according to current design specifications, and then nonlinear time-history analyses were performed on numerical 2D frame models. Based on the numerical analysis results, it can be comparatively verified that the CBFs with superelastic SMA bracing systems have more structural advantages in terms of energy dissipation and recentering behavior than those with conventional steel bracing systems.
참고문헌 (21)
- Rassati GA, "Component modeling of partially restrained composite joints under cyclic and dynamic loading", Journal of Structural Engineering. ASCE, 130(2), pp.343~351 (2004)
- 허종완, "Seismic Design, Performance, and Behavior of Composite-Moment Frames with Steel Beam-to-Concrete Filled Tube Column Connections", International Journal of STEEL STRUCTURES, 10(2), pp.177~191 (2010), 한국강구조학회
- 박대효, "Damage Evaluation of Composite-special Moment Frames with Concrete-filled Tube Columns under Strong Seismic Loads", KSCE Journal of Civil Engineering, 15(8), pp.1381~1394 (2011), 대한토목학회
- Hu JW, "Seismic performance evaluations and analyses for composite moment frames with smart SMA PR-CFT connections", 박사, pp.2008
- Hu JW, "Analyses and evaluations for composite-moment frames with SMA PR-CFT connections", Nonlinear Dynamics, 65(4) (2011)
- Hu JW, "Design, analysis, and application of innovative composite PR connections between steel beams and CFT columns", Smart Materials and Structures, 20(2) (2011)
- Sabol TA, "An assessment of seismic design practice of steel structures in the United State since the Northridge Earthquake", Structure Design and Tall Buildings, 13(5), pp.409~423 (2004)
- Research on improving the design and analysis of earthquake-resistant steel-braced frames. The 2000 NEHRP Professional Fellowship Report EERI, "Sabelli R.", ~ (2000)
- Sabelli R, "Seismic demands on steel braced-frame buildings with buckling-restrained braces", Engineering Structures, 25(5), pp.655~666 (2003)
- DesRoches R, "Cyclic properties of superelastic shape memory alloy wires and bars", Journal of Structural Engineering. ASCE, 130(1), pp.38~46 (2004)
- Song G, "Applications of shape memory alloys in civil structures", Engineering Structures, 28(9), pp.1266~1274 (2006)
- Ocel JM, "Steel beam-column connections using shape memory alloys", Journal of Structural Engineering. ASCE, 130(5), pp.732~740 (2004)
- American Society of Civil Engineers (ASCE), "Minimum Design Loads for Buildings and Other Structures (ASCE", SEI No. 7-05), 2005
- American Institute of Steel Construction (AISC), "Manual of steel construction, In Load and Resistance Factor Design (LRFD). 3rd edn" (2001)
- International Code Council (ICC), "International building code 2006(IBC2006)", ~ (2006)
- Sabelli R., "Recommended provisions for buckling-restrained braced frames", Engineering Journal. AISC, 41(4), pp.155~175 (2004)
- Mazzoni S, "OpenSEES command language manual v. 1.7.3" (2006), Department of Civil Environmental Engineering. University of California
- Fugazza D, "Shape alloy devices in earthquake engineering: mechanical properties, constitutive modeling and numerical simulations", 석사, pp.2003
- Auricchio F, "A one-dimensional model for superelastic shape-memory alloys with different properties between martensite and austenite", International Journal of Nonlinear Mechanics, 32(6), pp.1101~1114 (1997)
- Development of ground motion time histories for phase 2 of the FEMA, "SAC steel project", Somerville PG, 1997, SAC background document. Report No. SAC[DOI]
- McCormick J, "Permissible residual deformation levels for building structures considering both safety and human elements", Proc. 14 World Conference Earthquake Engineering Paper, Beijing, China. 2008;No. 05-06-0071 (2008)