필로티형 저층 내력벽주택의 내진설계 고려사항
Considerations for Seismic Design of Low-Rise Residential Bearing Wall Buildings with Pilotis
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the results of an analytical investigation on the seismic behavior of two residential 4-story bearing wall buildings with pilotis, each of which has symmetric or unsymmetric wall arrangement at their piloti level, are presented. The dynamic characteristics and lateral resistance of the piloti buildings were investigated through linear elastic and nonlinear static analyses. According to the results, the analytical natural period of vibration of the piloti buildings were significantly shorter than the fundamental period calculated in accordance with KBC 2016. In the initial elastic behavior, the walls resisting in-plane shear contributed to the lateral stiffness and strength, while the contribution of columns resisting flexural moments in double curvature was limited. However, after the shear cracking and yielding of the walls occurred, the columns significantly contributed to the residual strength and ductility. Based on those investigations, design recommendations of low-rise bearing wall buildings with piloti configuration are given.
Abstract
In this study, the results of an analytical investigation on the seismic behavior of two residential 4-story bearing wall buildings with pilotis, each of which has symmetric or unsymmetric wall arrangement at their piloti level, are presented. The dynamic characteristics and lateral resistance of the piloti buildings were investigated through linear elastic and nonlinear static analyses. According to the results, the analytical natural period of vibration of the piloti buildings were significantly shorter than the fundamental period calculated in accordance with KBC 2016. In the initial elastic behavior, the walls resisting in-plane shear contributed to the lateral stiffness and strength, while the contribution of columns resisting flexural moments in double curvature was limited. However, after the shear cracking and yielding of the walls occurred, the columns significantly contributed to the residual strength and ductility. Based on those investigations, design recommendations of low-rise bearing wall buildings with piloti configuration are given.
참고문헌 (20)
- Oh SH, "Pohang Earthquake Damage Report and Policy Proposal (Presentation Material)", Seminar on Earthquake Damage of Building Structures in Korea and Japan : Report on 2017 Pohang Earthquake.Architectural Institute of Korea (2017)
- Research on Earthquake Damage Prevention of Building Structures with Pilotis, "Park HG", Architectural Institute of Korea, ~ (2018)
- 김태완, "2017년 포항지진으로 피해를 입은 국내 필로티형 건물의 지진 거동", 한국지진공학회논문집, 22(3), pp.161~168 (2018), 한국지진공학회[DOI]
- 엄태성, "2017 포항지진에 의한 필로티형 내력벽건물의 구조손상 분석", 한국지진공학회논문집, 23(1), pp.9~18 (2019), 한국지진공학회[DOI]
- Architectural Institute of Korea, "Korean Building Code - Structural (KBC 2016)", Architectural Institute of Korea, ~ (2016)
- 김대환, "국내 지진재해도를 고려한 저층 필로티 건물의 붕괴 확률", 한국지진공학회논문집, 20(7), pp.485~494 (2016), 한국지진공학회
- 유창환, "비선형 동적해석을 이용한 소규모 필로티형 철근콘크리트 건축물의 내진성능평가", 한국지진공학회논문집, 20(4), pp.191~199 (2016), 한국지진공학회
- 고동우, "필로티형 고층 RC건물의 비선형시간이력해석", 한국지진공학회논문집, 13(1), pp.35~43 (2009), 한국지진공학회
- 고동우, "1:12축소 비정형 고층 RC 건물의 비선형거동에 대한 실험과 해석의 상관성", 한국지진공학회논문집, 11(2), pp.95~104 (2007), 한국지진공학회
- 이한선, "고층 철근콘크리트 건축구조모델의 지진응답에 대한 해석적 모사", 한국지진공학회논문집, 12(5), pp.1~10 (2008), 한국지진공학회
- Analysis manuel of MIDAS-GEN, "MIDAS Information Technology", ~ (2005)
- Korean Infrastructure Safety Corporation, "Seismic Performance Evaluation Manuel of Existing Buildings", ~ (2011)
- Computer and Structures Inc, "Perform-3D: Nonlinear Aanlysis and Performance Assesment for 3D Structures - User Guide Ver. 5", ~ (2011)
- Collins MP, "Shear and Torsion Design of Prestressed and Non-Prestressed Concrete Beams", PCI, 25(5), pp.32~100 (1980)
- Bentz EC, "Simplified Modified Compression Field Theory for Calculating Shear Strength of Reinforced Concrete Elements", ACI Structural Journal, 103(4), pp.614~624 (2006)
- Esfandiari A., "Shear Strength of Structural Concrete Members Using a Uniform Shear Element Approach", Ph.D., pp.2009
- Eom TS, "Load Contour Method for Biaxial Design of Reinforced Concrete L-Shaped Structural Walls", Engineering Structures, 146, pp.148~157 (2017)
- 남혜성, "C형 및 H형 철근콘크리트 구조벽체의 2축 상호작용과 등하중법", 콘크리트학회 논문집, 29(2), pp.189~200 (2017), 한국콘크리트학회
- Seismic Analysis and Retrofit of Concrete Buildings, "Applied Technology Council", Applied Technology Council, ~
- Improvement of Nonlinear Static Seismic Analysis Procedures, "Applied Technology Council", Federal Emergecy Management Agency, ~, pp.FEMA-440 (2005)