Seismic Response Characterization of Shear Wall in Auxiliary Building of Nuclear Power Plant
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The dynamic characterization of a three-story auxiliary building in a nuclear power plant (NPP) constructed with a monolithic reinforced concrete shear wall is investigated in this study. The shear wall is subjected to a joint-research, round-robin analysis organized by the Korea Atomic Energy Research Institute, South Korea, to predict seismic responses of that auxiliary building in NPP through a shake table test. Five different intensity measures of the base excitation are applied to the shaking table test to get the acceleration responses from the different building locations for one horizontal direction (front-back). Simultaneously to understand the global damage scenario of the structure, a frequency search test is conducted after each excitation. The primary motivation of this study is to develop a nonlinear numerical model considering the multi-layered shell element and compare it with the test result to validate through the modal parameter identification and floor responses. In addition, the acceleration amplification factor is evaluated to judge the dynamic behavior of the shear wall with the existing standard, thus providing theoretical support for engineering practice.
Abstract
The dynamic characterization of a three-story auxiliary building in a nuclear power plant (NPP) constructed with a monolithic reinforced concrete shear wall is investigated in this study. The shear wall is subjected to a joint-research, round-robin analysis organized by the Korea Atomic Energy Research Institute, South Korea, to predict seismic responses of that auxiliary building in NPP through a shake table test. Five different intensity measures of the base excitation are applied to the shaking table test to get the acceleration responses from the different building locations for one horizontal direction (front-back). Simultaneously to understand the global damage scenario of the structure, a frequency search test is conducted after each excitation. The primary motivation of this study is to develop a nonlinear numerical model considering the multi-layered shell element and compare it with the test result to validate through the modal parameter identification and floor responses. In addition, the acceleration amplification factor is evaluated to judge the dynamic behavior of the shear wall with the existing standard, thus providing theoretical support for engineering practice.
참고문헌 (29)
- Final safety evaluation report: Related to the combined licenses for vogtle electric generating plant, units 3 and 4, "NRC US", U.S. Nuclear Regulatory Commission, ~, pp.NUREG-2124 (2012)
- Li S, "Shaking table model test and seismic performance analysis of a high-rise RC shear wall structure", Shock and Vibration, 2019(6189873), pp.1~17 (2019)
- Martinelli P, "Simulation of the shaking table test of a seven-story shear wall building", Earthquake Engineering &Structural Dynamics, 38(5), pp.587~607 (2009)
- He J, "A shake table test study of reinforced concrete shear wall model structures exhibiting strong non-linear behaviors", Engineering Structures, 212(2020), pp.110481~ (2020)
- Ghorbanirenani I, "Shake table testing of slender RC shear walls subjected to eastern north america seismic ground motions", Journal of Structural Engineering, 138(12), pp.1515~1529 (2012)
- Li J, "Shaking table test and numerical simulation of a superimposed reinforced concrete shear wall structure", The Structural Design of Tall and Special Buildings, 27(2), pp.e1412~ (2018)
- 임승현, "구조물 및 기기의 한계성능 평가를 위한 고진동수 지진특성을 반영한 응답스펙트럼 형상", 한국지진공학회논문집, 24(1), pp.1~8 (2020), 한국지진공학회[DOI]
- Ye J, "Simplified analytical model and shaking table test validation for seismic analysis of mid-rise cold-formed steel composite shear wall building", Sustainability, 10(9), pp.3188~ (2018)
- Chao-gang Qin, "Shaking Table Test on Seismic Responses of a Monolithic Precast Concrete Shear Wall Structure", KSCE Journal of Civil Engineering, 22(10), pp.3903~3918 (2018), 대한토목학회[DOI]
- Richard B, "SMART 2008: Shaking table tests on an asymmetrical reinforced concrete structure and seismic margins assessment", Engineering Structures, 105, pp.48~61 (2015)
- 김광희, "The 12 September 2016 Gyeongju earthquakes: 2. Temporary seismic network for monitoring aftershocks", Geosciences Journal, 20(6), pp.753~757 (2016), 한국지질과학협의회[DOI]
- McKenna F, "OpenSees: Open system for earthquake engineering simulation", Computing in Science & Engineering, 13(4), pp.58~66 (2006)
- Shayanfar MA, "Progressive collapse-resisting mechanisms and robustness of RC frame–shear wall structures", Journal of Performance of Constructed Facilities, 31(5), pp.04017045~ (2017)
- Rahman MM, "FeView: Finite element visualization for opensees", Structural System Lab, ~ (2020)
- Lu X, "A shear wall element for nonlinear seismic analysis of super-tall buildings using OpenSees", Finite Elements in Analysis and Design, 98, pp.14~25 (2015)
- Kim BH, "A new method to extract modal parameters using output-only responses", Journal of Sound and Vibration, 282(1), pp.215~230 (2005)
- Brincker R, "Modal identification of outputonly systems using frequency domain decomposition", Smart Materials and Structures, 10(3), pp.441~445 (2001)
- Cara J, "Modal identification of structures from input", output data using the expectation–maximization algorithm and uncertainty quantification by mean of the bootstrap, 2019, pp.26(1), e2272~
- Park B-H, "Vector ARMAX modeling approach in multiinput modal analysis", Mechanical Systems and Signal Processing, 3(4), pp.373~387 (1989)
- Brown RW, "The continuous and discrete Fourier transforms", pp.1008~ (2014), Wiley-Blackwell
- Omar Omar, "An optimized rational fraction polynomial approach for modal parameters estimation from FRF measurements", Journal of Mechanical Science and Technology, 24(3), pp.831~842 (2010), 대한기계학회
- Brandt A, "Noise and vibration analysis: signal analysis and experimental procedures", pp.445~ (2011), John Wiley & Sons
- Brown DL, "Parameter estimation techniques for modal analysis", SAE Transactions, 88(1), pp.828~846 (1979)
- Böswald M, "A review of experimental modal analysis methods with respect to their applicability to test data of large aircraft structures", Proceedings of the International Conference on Noise and Vibration Engineering (2006)
- Parks TW, "Digital Filter Design" (1987), John Wiley & Son
- Shah C, "Mesh Discretization Error and Criteria for Accuracy of Finite Element Solutions", Proceedings of the 4th ASEAN ANSYS User Conference (2002)
- Nahar TT, "Effective Safety Assessment of Aged Concrete Gravity Dam based on the Reliability Index in a Seismically Induced Site", Applied Sciences, 11(5), pp.1987~ (2021)
- ATC, "Seismic performance assessment of buildings. FEMA-P58", Applied Technology Council, ~ (2018)
- ASCE, "ASCE", SEI 7-16: Minimum design loads and associated criteria for buildings and other structures, 2017, pp.889~