TMD 제어성능 개선을 위한 ETMD 개발
Development of ETMD for Improving TMD Control Performance
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
The TMD has a simpler structure than other vibration control devices and shows excellent control performance for the standardized vibration occurring in the structure. However, when the vibration cycle of the structure coincides with the vibration cycle of the TMD due to the sudden external loads, the off-tuning occurs, which threatens the structure while increasing the vibration width of the TMD. Therefore, Electromagnetic Tuned Mass Damper (ETMD) was developed as a semi-active TMD that prevents off-tuning while exhibiting excellent control performance like TMD. To verify the control performance of the developed ETMD, the bending behavior control performance evaluation experiment using a simple beam bridge was performed. The experimental method compared the mutual control power by experimenting with the existing TMD method and the developed ETMD under nine excitation frequency conditions. As a result, it was confirmed that the control effect of ETMD was about 4.85% higher than that of TMD at 3.02Hz, which generates the maximum displacement in the simple beam bridge. Also, the off-tuning occurred in some excitation conditions when using TMD, although the off-tuning did not occur when using ETMD. Therefore, the excellent control performance of the ETMD developed in this study was verified.
Abstract
The TMD has a simpler structure than other vibration control devices and shows excellent control performance for the standardized vibration occurring in the structure. However, when the vibration cycle of the structure coincides with the vibration cycle of the TMD due to the sudden external loads, the off-tuning occurs, which threatens the structure while increasing the vibration width of the TMD. Therefore, Electromagnetic Tuned Mass Damper (ETMD) was developed as a semi-active TMD that prevents off-tuning while exhibiting excellent control performance like TMD. To verify the control performance of the developed ETMD, the bending behavior control performance evaluation experiment using a simple beam bridge was performed. The experimental method compared the mutual control power by experimenting with the existing TMD method and the developed ETMD under nine excitation frequency conditions. As a result, it was confirmed that the control effect of ETMD was about 4.85% higher than that of TMD at 3.02Hz, which generates the maximum displacement in the simple beam bridge. Also, the off-tuning occurred in some excitation conditions when using TMD, although the off-tuning did not occur when using ETMD. Therefore, the excellent control performance of the ETMD developed in this study was verified.
참고문헌 (11)
- Khoury OE, "Recent Advances on Vibration Control of Structures under D ynamic L oading", Archives of Computational Methods in Eng., 20(4), pp.353~360 (2013)
- Bitraf M, "Active and Semi-active Adaptive Control for Undamaged and Damaged Building Structures under Seismic Load", Computer-Aided Civil and Infrastructure Eng., 27(1), pp.48~64 (2012)
- Dyke SJ, "Current Directions in Structural Control in the US, In Energy Dissipation and Active Vibration Control of Structures", 9th World Seminar on Seismic Isolation, pp.1~22 (2005)
- Frahm H, "Device for damping vibrations of bodies. U.S. Patent. 989;9528", ~
- Setareh M, "Pendulum tuend mass dampers for floor vibration control", Journal of Performance of Constructed Facilities, 20(1), pp.64~73 (2006), ASCE
- Huang H, "Adaptive tuned mass damper with shape memory alloy for seismic application", Engineering Structures, 223, pp.111171~ (2020), Elsevier
- 고아라, "비대칭 동조질량감쇠기를 활용한 바닥진동제어의 강건성 향상 방안", 한국강구조학회 논문집, 26(3), pp.177~189 (2014), 한국강구조학회
- Wang X, "Experimental study of the semi-active mass damper under impulse excitation", Review of Scientific Instruments, 93(1) (2022)
- 김기철, "바닥판 구조물의 진동제어를 위한 MR 감쇠기의 적용", 한국공간구조학회지, 3(21), pp.59~68 (2006), 한국공간구조학회
- Angelis MD, "Dynamic response and optimal design of structures with large mass ratio TMD", Earthquake Engng Struct. Dyn., 41, pp.41~60 (2012)
- Sadek F, "A method of estimating the parameters of tuned mass dampers for seismic applications", Earthquake Engng Struct. Dyn, 26(6), pp.617~635 (1997)