PC 접합부의 실물 성능실험을 통한 기계식이음 구조성능평가
Evaluation of Mechanical Joint Structural Performance through Actual Performance Testing of PC Connections
0
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
In this study, the SBC system, a new mechanical joint method, was developed to improve the constructability of precast concrete (PC) beam-column connections. The reliability of the finite element analysis model was verified through the comparison of experimental results and FEM analysis results. Recently, the intermediate moment frame, a seismic force resistance system, has served as a ramen structure that resists seismic force through beams and columns and has few load-bearing walls, so it is increasingly being applied to PC warehouses and PC factories with high loads and long spans. However, looking at the existing PC beam-column anchorage details, the wire, strand, and lower main bar are overlapped with the anchorage rebar at the end, so they do not satisfy the joint and anchorage requirements for reinforcing bars (KDS 41 17 00 9.3). Therefore, a mechanical joint method (SBC) was developed to meet the relevant standards and improve constructability. Tensile and bending experiments were conducted to examine structural performance, and a finite element analysis model was created. The load-displacement curve and failure pattern confirmed that both the experimental and analysis results were similar, and it was verified that a reliable finite element analysis model was built. In addition, bending tests showed that the larger the thickness of the bolt joint surface of the SBC, the better its structural performance. It was also determined that the system could improve energy dissipation ability and ductility through buckling and yielding occurring in the SBC.
Abstract
In this study, the SBC system, a new mechanical joint method, was developed to improve the constructability of precast concrete (PC) beam-column connections. The reliability of the finite element analysis model was verified through the comparison of experimental results and FEM analysis results. Recently, the intermediate moment frame, a seismic force resistance system, has served as a ramen structure that resists seismic force through beams and columns and has few load-bearing walls, so it is increasingly being applied to PC warehouses and PC factories with high loads and long spans. However, looking at the existing PC beam-column anchorage details, the wire, strand, and lower main bar are overlapped with the anchorage rebar at the end, so they do not satisfy the joint and anchorage requirements for reinforcing bars (KDS 41 17 00 9.3). Therefore, a mechanical joint method (SBC) was developed to meet the relevant standards and improve constructability. Tensile and bending experiments were conducted to examine structural performance, and a finite element analysis model was created. The load-displacement curve and failure pattern confirmed that both the experimental and analysis results were similar, and it was verified that a reliable finite element analysis model was built. In addition, bending tests showed that the larger the thickness of the bolt joint surface of the SBC, the better its structural performance. It was also determined that the system could improve energy dissipation ability and ductility through buckling and yielding occurring in the SBC.
참고문헌 (31)
- Bahrami S, "Behavior of two new moment resisting precast beam to column connections subjected to lateral loading", J Eng Str, 132, pp.808~821 (2017)
- Gallegos M, "Numerical study on cyclic response of end-plate biaxial moment connection in box columns", J Metals, 10(4), pp.523~ (2020)
- Im HJ, "Earthquake resistance of beam-column connection of precast concrete u-shaped shell construction", J Korea Concr Inst, 22(6), pp.741~751 (2010)
- Kim JS, "Headed stud shear connector for thin ultrahigh-performance concrete bridge deck", J Const Steel Resea, 108, pp.23~30 (2015)
- Lee SJ, "Seismic performance of precast concrete beam-column connections using ductile rod", J Korea Concr Inst, 26(6), pp.695~705 (2014)
- Lin Y, "Numerical study on cyclic response of end-plate biaxial moment connection in box columns", J Struc, 32, pp.1103~1114 (2021)
- Nunez E, "Cyclic behavior of hollow section beam–column moment connection Experimental and numerical study", J Metals, 10(12), pp.1608~ (2020)
- Nunez E, "Bidirectional response of weak-axis end-plate moment connections : numerical approach", J Metals, 10(7), pp.964~ (2020)
- Song JA, "Earthquake resistance of prefabricated reinforced concrete beam-column connection", J Archit Inst Korea Struct Constr, 27(10), pp.19~26 (2011)
- Wang H, "Test of precast pre-stressed beam-to-column joint with damage-free reinforced concrete slab", J Eng Str, 210, pp.110368~ (2020)
- Wang H, "Experimental study of a novel precast prestressed reinforced concrete beam-to-column joint", J Eng Str, 156, pp.68~81 (2018)
- Zhang J, "Experimental study on the seismic performance of steel–concrete beam–column connections for prefabricated concrete frames", J Building Eng, 43, pp.103236~ (2021)
- Zhang L, "Retrofit strategies against progressive collapse of steel gravity frames", J App Sci, 10(13), pp.4600~ (2020)
- Lee DJ, "Seismic experiment of precast concrete exterior beam-column joint using bolt type connection and prestressing method", J Korea Concr Inst, 26(2), pp.125~133 (2014)
- Choi HK, "Hysteretic behavior and seismic resistant capacity of precast concrete beam-to-column connections", J Earthq Eng Soc Korea, 14(4), pp.61~71 (2010)
- Kim SH, "Seismic performance evaluation of dry precast concrete beam-column connections with special moment frame details", J Earthq Eng Soc Korea, 27(5), pp.203~211 (2023)
- Shin DH, "Experiment on the hysteretic behavior of a hollw PC column-half PC beam exterior joint", J Korea Concr Inst, 29(5), pp.515~524 (2017)
- Jang BS, "Structural behavior of precast wide girder-column joints under lateral cyclic loading", J Korea Concr Inst, 33(3), pp.289~297 (2021)
- Hwang JH, "Reversed cyclic behavior of post-tensioned precast concrete beam-column connections with unbonded tendons", J Korea Concr Inst, 30(6), pp.657~664 (2018)
- Kim OJ, "Development and seismic performance of vertical joints in precast concrete shear walls under cyclic loads", J. Korea Inst Str Maint Inspet, 16(1), pp.140~148 (2012)
- Choi YC, "Inelastic behavior of exterior wide beam-column connections with U-shaped precast shell beam stressed by post-tensioning", J Archit Inst Korea Str Const, 20(12), pp.27~36 (2004)
- Ha SS, "An experimental study on the structural behavior of the half PC beam and column interior joint with strand", J Archit Inst Korea Str Const, 23(9), pp.3~11 (2007)
- Choi YC, "Inelastic behavior of interior wide beam-column connections with U-shaped precast shell beam stressed by post-tensioning", J Archit Inst Korea Str Const, 21(1), pp.11~19 (2005)
- Kim SH, "An experimental study of the structural behavior on the precast concrete exterior beamcolumn joint with through-bar type connection", J Archit Inst Korea Str Const, 22(11), pp.3~10 (2006)
- Kim SH, "An experimental study of the structural behavior on the precast concrete beam-column interior joint with splice type reinforcing bars", J Archit Inst Korea Str Const, 20(10), pp.53~61 (2004)
- Lee WJ, "Seismic performance evaluation of intermediate precast structural walls", J Next Con Tec Ass, 6(3), pp.421~432 (2022)
- "KDS 41 17 00. Building seismic design code", Korea Construction Standards Center, ~ (2022)
- "KDS 14 20 00. Concrete structural design code", Korea Construction Standards Center, ~ (2022)
- Huang W, "Seismic performance analysis of a novel demountable precast concrete beam-column connection with multi-slit devices", J Building Eng, 44, pp.523~ (2021)
- Kim SH, "Seismic performance evaluation of dry precast concrete beam-column connections with intermediate moment frame details", J Earthq Eng Soc Korea, 27(3), pp.129~137 (2023)
- "ANSYS v.19.1. Swanson analysis system", ~ (2020)