조적채움벽을 갖는 RC 벽‐슬래브 골조의 내진성능 연구
Investigation of Seismic Performance of RC Wall-Slab Frames with Masonry Infill
2
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study investigated the seismic performance of reinforced concrete (RC) wall-slab frames with masonry infills. Four RC wall-slab frames with or without masonry infill were tested under cyclic loading. The RC frames were composed of in-plane and out-of-plane walls and top and bottom slabs. For masonry infill walls, cement bricks were stacked applying mortar paste only at the bed joints, and, at the top, a gap of 50 mm was intentionally left between the masonry wall and top RC slab. Both sides of the masonry walls were finished by applying ordinary or fiber-reinforced mortars. The tests showed that despite the gap on top of the masonry walls, the strength and stiffness of the infilled frames were significantly increased and were different depending on the direction of loading and the finishing mortars. During repeated loading, the masonry walls underwent horizontal and diagonal cracking and corner crushing/spalling, showing a rocking mode inside the RC wall-slab frame. Interestingly, this rocking mode delayed loss of strength, and as a result, the ductility of the infilled frames increased to the same level as the bare frame. The interaction of masonry infill and adjacent RC walls, depending on the direction of loading, was further investigated based on test observations.
Abstract
This study investigated the seismic performance of reinforced concrete (RC) wall-slab frames with masonry infills. Four RC wall-slab frames with or without masonry infill were tested under cyclic loading. The RC frames were composed of in-plane and out-of-plane walls and top and bottom slabs. For masonry infill walls, cement bricks were stacked applying mortar paste only at the bed joints, and, at the top, a gap of 50 mm was intentionally left between the masonry wall and top RC slab. Both sides of the masonry walls were finished by applying ordinary or fiber-reinforced mortars. The tests showed that despite the gap on top of the masonry walls, the strength and stiffness of the infilled frames were significantly increased and were different depending on the direction of loading and the finishing mortars. During repeated loading, the masonry walls underwent horizontal and diagonal cracking and corner crushing/spalling, showing a rocking mode inside the RC wall-slab frame. Interestingly, this rocking mode delayed loss of strength, and as a result, the ductility of the infilled frames increased to the same level as the bare frame. The interaction of masonry infill and adjacent RC walls, depending on the direction of loading, was further investigated based on test observations.
참고문헌 (19)
- Korea Infrastructure Safety Corporation, "Guide Lines for Seismic Performance Evaluation for Existing Buildings", ~ (2013)
- MOE, "Seismic Performance Evaluation and Retrofit Manual for School Facilities", Ministry of Education, ~ (2019)
- ASCE, "Prestandard and Commentrary for the Seismic Rehabilitation of Buildings (FEMA 356)", Federal Emergency Management Agency, ~ (2000)
- American Society of Civil Engineers, "ASCE 41-17 Seismic Evaluation and Retrofit of Existing Buildings", ~ (2017)
- 고현, "비내력벽을 가진 RC모멘트저항골조의 지진거동 평가", 한국지진공학회논문집, 14(5), pp.13~22 (2010), 한국지진공학회
- 조원선, "비보강 조적 끼움벽체를 가지는 철근콘크리트 골조 구조물 내진성능평가", 대한건축학회논문집 구조계, 28(03), pp.31~41 (2012), 대한건축학회
- 박지훈, "등가 스트럿 모델을 이용한 조적조 채움벽 골조의 내진성능평가", 한국지진공학회논문집, 16(1), pp.47~59 (2012), 한국지진공학회
- 문기훈, "조적조 비내력벽을 가진 기존 학교 구조물의 내진 성능 평가", 한국지진공학회논문집, 16(6), pp.37~46 (2012), 한국지진공학회
- 유은종, "조적채움벽 골조의 내진성능평가를 위한 등가 스트럿모델의 비교연구", 한국지진공학회논문집, 18(2), pp.79~87 (2014), 한국지진공학회
- 유은종, "조적채움벽의 전단강도에 따른 채움벽골조의 내진성능", 한국지진공학회논문집, 19(4), pp.173~181 (2015), 한국지진공학회
- Holmes M, "Steel Frames with Brickwork and Concrete Infilling", ICE Proceedings, 19(4) (1961)
- Crisafulli FJ, "Seismic behaviour of Reinforced Concrete Structures with Masonry Infills", Ph.D., pp.1997
- El-Dakhakhni WW, "Three-Strut Model for Concrete Masonry-Infilled Steel Frames", Journal of Structural Engineering, 129(2), pp.127~185 (2003)
- Dolsek M, "Mathematical Modelling of an Infilled RC Frame Structure based on the Results of Pseudo-Dynamic Tests", Earthquake Engineering and Structural Dynamics, 31(6), pp.1215~1230 (2002)
- Paulay T, "Seismic Design of Reinforced Concrete and Masonry Buildings" (1992), Wiley
- Stafford-Smith B, "Behavior of Square Infilled Frames", Journal of the Structural Division, 92(1), pp.381~404 (1966), ASCE
- 이승제, "Investigation of Diagonal Strut Actions in Masonry-Infilled Reinforced Concrete Frames", International Journal of Concrete Structures and Materials, 15(2), pp.169~182 (2021), 한국콘크리트학회[DOI]
- Kim JH, "UHD-Wall Development of Seismic Reinforcement for Small-Scale Deteriorated Buildings", R&D Report submitted to KAIA, ~ (2022)
- MOLIT, "Design Code of Development and Splice for Concrete Structures (KDS 14 20 52)", Ministry of Land, Infrastructure, and Transport, ~ (2019)