본문 바로가기
KERD
논문

알칼리 프리계 급결제를 사용한 강섬유 보강 숏크리트의 성능 평가

Performance of Steel Fiber Reinforced Shotcrete using Alkali Free Based Accelerator

0

조회

0

다운로드

0

인용

0

참고문헌

주제분류농학

초록

Abstract

Modern underground and tunnel works that the wet type shotcrete is getting widely designed and applied in a large scale project. Further to its applications, the needs of improving the performance of the shotcrete, such as new and developed additives and accelerators for increasing the performance of shotcrete, become the most important issue in the field. The main objective of this study evaluated to performance of steel fiber reinforced shotcrete using alkali free based accelerator for the durability and high quality of shotcrete. The major test variables are accelerator type and its dosage. One type silicate based accelerator and one type aluminate based accelerator and one type alkali free based accelerator were used. The dosage of accelerators is determined by the manufactures and laboratory test condition.Compressive strength test results showed that the dosage of silicate and aluminate based accelerators caused reduction of mechanical properties of shotcrete. Compressive strength of alkali free based accelerator is more stable than of silicate and aluminate based accelerators. Also, according to the compressive strength and flexural test results, it was found that steel fiber reinforced shotcrete used alkali free based accelerator could attain significant improvement in the mechanical and flexural performance.

참고문헌 (20)

  1. "1995. Guide to shotcrete", 506, pp.90~ (1995), ACI
  2. "State-of-the-art report on fiber reinforced shotcrete", 506, pp.1~8 (1995), ACI
  3. "Specification for materials, proportioning, and application of shotcrete", 506, pp.2~90 (1995), ACI
  4. "Guide to certification of shotcrete nozzlemen", 506, pp.3~91 (1995), ACI
  5. "Guide for evaluation of shotcrete", 506, pp.4~94 (1995), ACI
  6. "1989. Standard test method for flexural toughness and first-crack strength of fiber-reinforced concrete."
  7. "Standard test method for time of setting of portland-cement pastes containing accelerating admixtures for shotcrete by the use of gillmore needle.", pp.~88
  8. "Mechanical and physical properties of structural polymer fiber reinforced shotcrete" (2003), Konkuk Univ
  9. "The influence of alkali-free and alkaline shotcrete accelerators within cement systems I", 31, pp.913~918
  10. "Comparative evaluation of system ductility of mesh and fibre rein forced shotcretes, Shotcrete for Underground Support Ⅷ", pp.1~23 (1999)
  11. "Design guidelines for the use of fiber-reinforced shotcrete in ground support", pp.16~21 (2002)
  12. "1983. Method of test for flexural strength and flexural toughness of fiber reinforced concrete."
  13. "Performance of steel fiber reinforced shotcrete with alkali free accelerator" (2003), Konkuk Univ.
  14. "A study on the flexural toughness evaluation method of steel fiber reinforced shotcrete", 10, pp.196~210 (2000), Tunnel and Underground
  15. "Testing method for compressive strength of hydraulic cement mortar."
  16. "Testing method for time of setting of hydraulic cement."
  17. "Testing mothod for compressive strength of molded concrete cylinders."
  18. "The opimum geometry factor of high-performance structural synthetic fibers" (2002), Konkuk Univ.
  19. "Accelerating admixtures for shotcrete", 20, pp.213~219 (1998)
  20. "Experimental study on reduce of rebound amounts in shotcrete works", 21(4-D), pp.499~508 (2001), Journal of KSEC

관련 논문AI추천

이 간행물의 다른 논문 (8건)