유한요소법을 이용한 동적 지진하중을 받는 교량의 구조물-유체-지반 상호작용해석
Analysis of Structure-Fluid-Soil Interaction Problem of a Bridge Subjected to Dynamic Seismic-Load Using Finite Element Method
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In construction facilities such as bridges, the fluid boundary layer(or water film) is formed at the structure-soil interface by the inflow into the system due to rainfall or/and rising ground-water. As a result, the structure-soil interaction(SSI) state changes into the structure-fluid-soil interaction(SFSI) state. In general, construction facilities may be endangered by the inflow of water into the soil foundation. Thus, it is important to predict the dynamic SFSI responses accurately so that the facilities may be properly designed against such dangers. It is desired to have the robust tools of attaining such a purpose. However, there has not been any report of a method for the SFSI analyses. The objective of this study is to propose an efficient method of finite element modelling using the new interface element named hybrid interface element capable of giving reasonable predictions of the dynamic SFSI response. This element enables the simulation of the limited normal tensile resistance and the tangential hydro-plane behaviour, which has not been preceded in the previous studies. The hybrid interface element was tested numerically for its validity and employed in the analysis of SFSI responses of the continuous bridge subjected to seismic load under rainfall or/and rising ground-water condition. It showed that dynamic responses of the continuous bridge resting on direct foundation may be amplified under rainfall condition and consequently lead to significant variation of stresses.
Abstract
In construction facilities such as bridges, the fluid boundary layer(or water film) is formed at the structure-soil interface by the inflow into the system due to rainfall or/and rising ground-water. As a result, the structure-soil interaction(SSI) state changes into the structure-fluid-soil interaction(SFSI) state. In general, construction facilities may be endangered by the inflow of water into the soil foundation. Thus, it is important to predict the dynamic SFSI responses accurately so that the facilities may be properly designed against such dangers. It is desired to have the robust tools of attaining such a purpose. However, there has not been any report of a method for the SFSI analyses. The objective of this study is to propose an efficient method of finite element modelling using the new interface element named hybrid interface element capable of giving reasonable predictions of the dynamic SFSI response. This element enables the simulation of the limited normal tensile resistance and the tangential hydro-plane behaviour, which has not been preceded in the previous studies. The hybrid interface element was tested numerically for its validity and employed in the analysis of SFSI responses of the continuous bridge subjected to seismic load under rainfall or/and rising ground-water condition. It showed that dynamic responses of the continuous bridge resting on direct foundation may be amplified under rainfall condition and consequently lead to significant variation of stresses.
참고문헌 (16)
- Brumund, W. F., "Experimental study of static and dynamic friction between sand and typical construction materials", Journal of Testing and Evaluation, 1(2), pp.162~165 (1973)
- Clough, G. W., "Finite Element analyses of retaining wall behavior", Journal of the Soil Mechanics and Foundation Division-ASCE, 97(12), pp.1657~1673 (1971)
- Desai, C. S., "Cyclic testing and modeling of interfaces", Journal of Geotechnical Engineering-ASCE, 111(6), pp.783~815 (1985)
- Desai, C. S., "Modeling of joints and interfaces using the disturbed-state concept", International Journal for Numerical and Analytical Methods in Geomechanics, 16(9), pp.623~653 (1992)
- Ghaboussi, J., "Finite element for rock joints and interfaces", Journal of the Soil Mechanics and Foundation Division-ASCE, 99(10), pp.833~847 (1973)
- Goodman, R. E., "A model for the mechanics of jointed rock", Journal of the Soil Mechanics and Foundation Division-ASCE, 94(3), pp.637~659 (1968)
- Herrmann, L. R., "Finite element analysis of contact problems", Journal of the Engineering Mechanics Division-ASCE, 104(5), pp.1043~1057 (1978)
- Heuze, F. E, "New models for rock joints and interfaces", Journal of the Geotechnical Engineering Division-ASCE, 108(5), pp.757~776 (1982)
- Kramer, S. L., "Geotechnical earthquake engineering" (1996), Prentice-Hall
- Newmark, N. M., "A method of computation for structural dynamics", Journal of the Engineering Mechanics Division, 85(3), pp.67~94 (1959)
- Parmelee, R. A., "Building-foundation interaction effects", Journal of the Engineering Mechanics Division ASCE, 93(2), pp.131~152 (1967)
- Potyondy, J. G., "Skin friction between various soils and construction material", Geotechnique, 11(4), pp.331~353 (1961)
- Pradhan, S. K., "DSC model for soil and interface including liquefaction and prediction of centrifuge test", Journal of Geotechnical and Geoenvironmental Engineering, 132(2), pp.214~222 (2006)
- Sharma, K. G., "Analysis and implementation of thin-layer element for interfaces and joints", Journal of Engineering Mechanics-ASCE, 118(12), pp.2442~2462 (1992)
- Shakib, H., "Dynamic soil-structure interaction effects on the seismic response of asymmetric buildings", Soil Dynamics and Earthquake Engineering, 24(5), pp.379~388 (2004)
- "JSCE, 2002, Specification for Highway BridgeㆍPart Ⅴ : Seismic Design, Japan", ~ (2002)