재활용 도로재료의 회복탄성계수 산정을 위한 적용 모델의 평가
Evaluation of Resilient Modulus Models for Recycled Materials
0
조회
0
다운로드
0
인용
0
참고문헌
초록
Many models have been used to represent the effects of confining stress, bulk stress, and shear stress on the value of the resilient modulus (Mr). This study was conducted to estimate Mr of the recycled materials such as recycled concrete aggregate (RCA) and recycled asphalt pavement (RAP) through the repeated load cyclic test. Also, two models were applied to estimation of Mr for comparing between measured Mr values and predicted Mr values. The first model (A-model) can provide a quick and easy estimation of the Mr based on the bulk stress, while the second model (N-model) includes not only the bulk stress but also the shear stress. Statistical analysis indicated that all results using the both of models are significant at a 95 % confidence level. Therefore, the both of models could be used as an effective prediction model of Mr for RCA and RAP. Especially, the Model 2 including the parameters of the bulk stress and the shear stress could give more reliable estimation at the high range of Mr values.
Abstract
Many models have been used to represent the effects of confining stress, bulk stress, and shear stress on the value of the resilient modulus (Mr). This study was conducted to estimate Mr of the recycled materials such as recycled concrete aggregate (RCA) and recycled asphalt pavement (RAP) through the repeated load cyclic test. Also, two models were applied to estimation of Mr for comparing between measured Mr values and predicted Mr values. The first model (A-model) can provide a quick and easy estimation of the Mr based on the bulk stress, while the second model (N-model) includes not only the bulk stress but also the shear stress. Statistical analysis indicated that all results using the both of models are significant at a 95 % confidence level. Therefore, the both of models could be used as an effective prediction model of Mr for RCA and RAP. Especially, the Model 2 including the parameters of the bulk stress and the shear stress could give more reliable estimation at the high range of Mr values.
참고문헌 (19)
- Standard method of test for resilient modulus of unbound granular base, "subbase materials and subgrade soils-SHRP protocol P.46", AASHTO, 1994, AASHTO designation T294-94
- Repeated loading testing evaluation of base course materials, "Barksdale, R. D.", FHWA, ~, pp.GHD Research Project 7002 (1972)
- Bennert, T., "Utilization of construction and demolition debris under traffic-type loading in base and subbase applications", Transportation Research Record, 1714, pp.33~39 (2000)
- Biarez, J., "Contributio a l'Etude des properties mecaniques des sols et des maeriau pulverulents", 박사, pp.1962
- Blankenagel, B. J., "Laboratory characterization of recycled concrete for use as pavement base material", Geomaterials, 1952, pp.21~27 (2006)
- Guthrie, W. S., "Effects of reclaimed asphalt pavement on mechanical properties of base materials", Transportation Research Record, 2006, pp.44~52 (2007)
- Hicks, R. G., "Factors influencing the resilient properties of granular material", Transportation Research Record, 345, pp.15~31 (1971), TRB
- Kim, K. W., "Evaluation for characteristics of coal-mine waste concrete", Journal of the Korean Society of Agricultural Engineers, 43(2), pp.132~139 (2001)
- 김광우, "아스팔트 콘크리트에 적정 폐비닐 첨가량 결정에 관한 실험적 연구", 한국농공학회논문집, 44(5), pp.88~95 (2002), 한국농공학회
- Kuo S. S., "Investigation of recycled concrete made with limestone aggregate for a base course in flexible pavement", Geomaterials, 1787, pp.99~108 (2002)
- Kweon, G. C., "Alternative Mr testing methods for subgrade and subbase materials considering deformational characteristics of soils", 박사, pp.1999
- Kweon, G., "Stiffness characteristics of subgrade and subbase materials in Korea", KSCE Proceeding, pp.133~136 (1999)
- May, R. W., "Effective granular modulus to model pavement responses, Layered Pavement Systems", Transportation Research Record, 810, pp.1~9 (1981)
- Nataatmadja, A., "Resilient response of concrete road aggregates", Journal of Transportation Engineering, 127(5), pp.450~453 (2001)
- NCHRP, "Laboratory determination of resilient modulus for flexible pavement design", National Cooperative Highway Research Program Research Results Digest, 285, pp.1~48 (2004)
- Rada, G., "Comprehensive evaluation of laboratory resilient moduli results for granular material layered pavement system", Transportation Research Record, 810, pp.471~493 (1981), TRB, National Research Counsil
- Sung, C. Y., "Characteristics of recycled concrete using recycled coarse aggregate and industrial by-products", Journal of Advanced Mineral Aggregate Composites, 9, pp.125~132 (2004)
- Sung, C. Y., "Physical and mechanical properties of polymer concrete using recycled aggregate", Journal of Agri. Sci. Chungnam National University, Korea, 32(1), pp.19~27 (2005)
- Uzan, J., "Characterization of granular material, analysis and testing of granular base and subbase", Transportation Research Record, 1022, pp.1~9 (1985)