새만금방조제 해측피복석의 변형유형에 따른 마모원인분석
Analysis on the Cause of Abrasion according to Deformation Types of Seaside Armor Stones in Saemangeum Seadike
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
This study is focused on analyzing the deformation types of seaside armor stones based of field survey in order to establish thecause of abrasion following the deformation of seaside armor stones. 1. The deformation of seaside armor stone in saemangeum seadike was classified as three different types: floating, deviation, and abrasion. 2. It was discovered that the stones floated to the extentof maximum 50 m, as the result of inspecting floating stones which were situated on different ten places. 3. The average number ofdeviation in the high ocean wave section was four times more than that in the ordinary ocean wave section, as a result of comparingthe deviation number of the ordinary ocean wave section and that of the high ocean wave section for the purpose of inspecting therelation between the deviation of armor stones and the effects of ocean wave. 4. The angular shape of armor stones seen in theinitial construction period has been abraded smoothly, as result of comparing of the shape change of armor stones for the purposeof inspecting abrasion state of seaside armor stones. 5. It was discovered that the abrasion of armor stone was severe in the sectionof many floating stones, as a result of analyzing the levels of abrasion and the cumulative sections of floating stones for the purposeof investigating the cause of abrasion.
Abstract
This study is focused on analyzing the deformation types of seaside armor stones based of field survey in order to establish thecause of abrasion following the deformation of seaside armor stones. 1. The deformation of seaside armor stone in saemangeum seadike was classified as three different types: floating, deviation, and abrasion. 2. It was discovered that the stones floated to the extentof maximum 50 m, as the result of inspecting floating stones which were situated on different ten places. 3. The average number ofdeviation in the high ocean wave section was four times more than that in the ordinary ocean wave section, as a result of comparingthe deviation number of the ordinary ocean wave section and that of the high ocean wave section for the purpose of inspecting therelation between the deviation of armor stones and the effects of ocean wave. 4. The angular shape of armor stones seen in theinitial construction period has been abraded smoothly, as result of comparing of the shape change of armor stones for the purposeof inspecting abrasion state of seaside armor stones. 5. It was discovered that the abrasion of armor stone was severe in the sectionof many floating stones, as a result of analyzing the levels of abrasion and the cumulative sections of floating stones for the purposeof investigating the cause of abrasion.
참고문헌 (13)
- Korea rural community corporation(KRC), "Seamankeum tideland reclamation project", 158~159 (2002)
- Kong, B. S., "The study on the strengthening method of seadike armor-layer", 석사, pp.2003
- Korea rural community corporation(KRC), "Study on effective methods for maintenance of saemangum facilities", 3~5 (2008)
- Korea rural community corporation(KRC), "Report of Tideland reclamation", 3~10 (2009)
- Study on devices against abrasion of seaside armor stones in saemangum sea dike, "Yoon, K. S.", Korea rural community corporation (KRC), 3~100 (2011)
- Study on movement features of seaside armor stones according to wave in saemangum sea dike, "Baek, S. C.", Korean geo-environmental society, 12~17 (2011)
- Ertas Deniz, B., "Testing of armourstone for the purpose of durability (TURKEY)", Journal of Coastal Research, 56, pp.501~504 (2009)
- Latham, J. P., "A mill Abrasion test for wear resistance of armour stone", Rock for Erosion Control. ASTM STP 1177, ~ (1993)
- Latham, J. P., "Rock quality, durability and service life prediction of armourstone", Engineering Geology, 87, pp.122~140 (2006)
- Latham, J. P., "Abrasion Testing and Armourstone Degradation", Coastal Engineering, 12, pp.233~255 (1988)
- Lienhart, D. A., "Rock engineering rating system for assessing the suitability of armourstone sourcees", Advances in Aggregates and armourstone Evaluation, Engineering Geology Special Publications, 13, pp.91~106 (1998)
- Pool, A, B, "Rock quality in coastal engineering", Journal of Engineering Geology, 24, pp.85~90 (1991)
- Tomasicchio, G. R., "Armourstone abrasion due to displacements in sea storms. Journal of Waterway. Port, Coastal and Ocean Engineering", ASCE, 129(5), pp.229~232 (2003)