TANK 모형 매개변수 추정을 위한 회귀식 개발
Regression Equations for Estimating the TANK Model Parameters
2
조회
0
다운로드
9
인용
0
참고문헌
키워드
초록
The TANK model has been widely used in rainfall-runoff modeling due to its simplicity of concept and computation while achieving forecast accuracy. A major barrier to the model application is to determine parameter values for ungauged watersheds, leading to the need of a method for the parameter estimation. The objective of this study was to develop regression equations for estimating the 3th TANK model parameters considering their variations for the ungauged watersheds. Thirty watersheds of dam sites and stream stations were selected for this study. A genetic algorithm was used to optimize TANK model parameters. Watershed characteristics used in this study include land use percent, watershed area, watershed length, and watershed average slope. Generalized equations were derived by correlating to the optimized parameters and the watershed characteristics. The results showed that the TANK model, with the parameters determined by the developed regression equations, performed reasonably with 0.60 to 0.85 of Nash-Sutcliffe efficiency for daily runoff. The developed regression equations for the TANK model can be applied for the runoff simulation particularly for the ungauged watersheds, which is common for upstream of agricultural reservoirs in Korea.
Abstract
The TANK model has been widely used in rainfall-runoff modeling due to its simplicity of concept and computation while achieving forecast accuracy. A major barrier to the model application is to determine parameter values for ungauged watersheds, leading to the need of a method for the parameter estimation. The objective of this study was to develop regression equations for estimating the 3th TANK model parameters considering their variations for the ungauged watersheds. Thirty watersheds of dam sites and stream stations were selected for this study. A genetic algorithm was used to optimize TANK model parameters. Watershed characteristics used in this study include land use percent, watershed area, watershed length, and watershed average slope. Generalized equations were derived by correlating to the optimized parameters and the watershed characteristics. The results showed that the TANK model, with the parameters determined by the developed regression equations, performed reasonably with 0.60 to 0.85 of Nash-Sutcliffe efficiency for daily runoff. The developed regression equations for the TANK model can be applied for the runoff simulation particularly for the ungauged watersheds, which is common for upstream of agricultural reservoirs in Korea.
참고문헌 (21)
- Engel B., "A hydrologic", water quality model application protocol, 2007, pp.43(5), 1223~1236
- Han, S. H., "Application of rainfall-runoff model for the runoff analysis", 석사, pp.1994
- Heo, Y. M., "A streamflow network model for daily water supply and demands on small watershed", 박사, pp.1992
- Holland, J. H., "Adaptation in natural and artificial systems" (1975), The University of Michigan Press
- 강민구, "미계측 유역 유출 모의를 위한 Tank 모형의 매개변수 지역화", 한국수자원학회 논문집, 46(5), pp.519~530 (2013), 한국수자원학회
- 김철, "지형자료를 이용한 TANK 모형의 매개변수 최적화", 대한토목학회 논문집B, 24(6b), pp.553~560 (2004), 대한토목학회
- Kim, H. Y., "An evaluation of parameter variations for a linear reservoir (Tank) model with watershed characteristics", Journal of Korea Society of Agricultural Engineers, 28(2), pp.42~52 (1986)
- Kim, H. Y., "Simulating daily inflow and release rates for irrigation reservoirs (1)", Journal of Korea Society of Agricultural Engineers, 30(1), pp.50~62 (1988)
- Kim, J. Y., "Sensitivity analysis for Tank model’s parameters", Journal of KCID, 8(2), pp.55~63 (2001)
- Kim, S. J., "A regression equation of Tank model parameters for daily runoff estimation in a region with insufficient hydrological data", Journal of Korea Society of Agricultural Engineers Symposium, pp.412~418 (2000)
- 김선주, "유전자 알고리즘을 이용한 장,단기 유출모형의 매개변수 최적화", 한국농공학회논문집, 46(5), pp.41~52 (2004), 한국농공학회
- 이성용, "단일변이 탐색법과 유전 알고리즘에 의한 탱크모형 매개변수 결정 비교 연구", 한국농공학회논문집, 51(3), pp.1~8 (2009), 한국농공학회
- A study of optimization for water resources planning (Ⅲ): The assessment of water supply reliability and development of water supply planning system, "Ministry of Construction Transportation", Korea Institute of Civil Engineering and Building Technology, ~ (1999)
- Moriasi, D. N., "Model evaluation guidelines for systematic quantification of accuracy in watershed simulations", Transaction of the ASABE, 50(3), pp.885~990 (2007)
- Nash, J. E., "River flow forecasitng through conceptual models Part Ⅰ- A discussion of principles", Journal of Hydrology, 10, pp.282~290 (1970)
- Song, J. H., "An introduction of a parameter optimization method for watershed models using MATLAB", Rural Resources, 56(2), pp.16~25 (2014)
- 송정헌, "연단위 관개효율 변화를 고려한 관개지구 용수 공급량 모의", 한국수자원학회 논문집, 48(6), pp.425~438 (2015), 한국수자원학회
- 송정헌, "복합영농 관개지구의 배수량 모의 모형의 개발", 한국농공학회논문집, 55(3), pp.63~73 (2013), 한국농공학회
- Sugawara, M., "A method for runoff analysis" (1972), Kyoritsu Shuppan Press
- Yokoo, Y., "Regionalization of lumped water balance model parameters based on multiple regression", Journal of Hydrology, 246, pp.209~222 (2001)
- Yoo, S. H., "Climate change impacts on water storage requirements of an agricultural reservoir considering changes in land use and rice growing season in Korea", Agricultural Water Management, 117, pp.43~54 (2013)