유한요소해석을 이용한 채널 I 형 잠호 맞대기 용접부의 변형 및 잔류 응력 예측에 관한 연구
A Study on the Prediction of Welding Distortion and Residual Stress for Channel I Butt SA Weldment using FE Analysis
1
조회
0
다운로드
6
인용
0
참고문헌
키워드
초록
Abstract
The purpose of this study is to establish the predictive method of welding distortion and residual stress for the channel I butt SA (submerged arc) weldment using FEA. In order to do it, the heat input model for the weldment was defined as the combined heat source with the surface heat flux of gaussian distribution and volumetric heat source uniformly distributed within weld groove by comparing the shapes of molten pool and temperature distribution obtained by FEA with those of experiments. The arc efficiency of SA welding for two-dimensional FE analysis was evaluated as 0.85. The welding distortion and residual stress of the weldment obtained by FEA and heat input model proposed have a good agreement with those obtained by experiment. Based on the results, it was suggested that the proper heat input model should be required to evaluate the welding distortion for weldment.
참고문헌 (9)
- "FEA를 이용한 Arc 용접부의 온도 분포 예측 표준", 23(6), pp.497~508 (2005)
- "박판구조물의 용접 면외변형에 대한 이론 해석적 접근", 42(5), pp.466~471 (2005)
- "자동 용접부 회전 변형에 미치는 가접의 영향", pp.289~291 (2004)
- "평블록의 용접변형예측 시뮬레이터", 41(1), pp.55~63 (2004)
- "선체 블록의 용접변형 예측 및 제어를 위한 연구", 37(2), pp.127~136 (2000)
- "Thermal Stress in a Submerged-Arc Welded Joint Considering Phase Transformations", pp.356~362 (1978)
- "Control Distortion in Thin Ship Panels", pp.83~92 (1997)
- "Residual Stress Compendium Compilation: Draft Protocol and Call for Participation" (2002)
- "Introduction to Heat Transfer", Incropera F