선체 블록 도장방법 표준프로세스 구현을 위한 예측식 개발 및 검증에 관한 연구
A Study on Development and Verification of Prediction Formula for Realization of Standard Process for Hull Block Coating Method
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
It is very hard to control the quality of coating work in shipbuilding process, because it is highly affected by several parameters such as space between object and nozzle tip, spray velocity, pressure, tip size, and etc. Even so a coating work in shipbuilding is done by workers’experience and skill as yet. It causes not only an excessive use of paints but also a decrease of productivity. In order to solve this problem, we developed a formula that predicts the film thickness and determined the proper coating pattern. Also we had done a series of experiments to verify the results of this study.
Abstract
It is very hard to control the quality of coating work in shipbuilding process, because it is highly affected by several parameters such as space between object and nozzle tip, spray velocity, pressure, tip size, and etc. Even so a coating work in shipbuilding is done by workers’experience and skill as yet. It causes not only an excessive use of paints but also a decrease of productivity. In order to solve this problem, we developed a formula that predicts the film thickness and determined the proper coating pattern. Also we had done a series of experiments to verify the results of this study.
참고문헌 (7)
- Back, J.J, "A Study on Pressure Drop and Flow Rare of High Viscosity Paint", The Korean Society of Mechanical Engineers, pp.786~791 (2003)
- Hwang, S.S, "Experimental Study for the Optimum Conditions of Painting Using Phase Doppler Particle Analyzer", The Korean Society Of Automotive Engineers, 5(4), pp.1~20 (1997)
- Jang, S.I, "Paint Administrative Work Guide, Chapter 2" (1989), Sehwa
- Ji, S.I, "Coating Optimum Condition and Method Research of Antifouling agents for Ship Considering Field Condition", The Corrosion Science Society of Korea, 2007 Fall Meeting Abstracts and Symposium on Protective Coating, pp.110~122 (2007)
- Jeon, Y.C, "A Study on Properties of Painting Materials for Ballast Tank of Ship", Proceedings of the KWS Conference, 통권 : 1, pp.39~40 (1997)
- Industry and Energy, A Report about Technical Development of inside Coating at the Hull and pre-treatment Automation System, , Minstry of Commerce, ~ (2005)
- Park, J.S, "Paint Theory and Practice, Chapter 7" (2003), Iljinsa