G/T 190톤급 한국 대형선망 본선의 저항저감에 대한 연구
A Study on the Resistance Reduction of G/T 190ton Class Main Vessel in Korean Large Purse Seiner Fishing System
2
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
In this study, hull form of main vessel of Korean large purse seiner fishing industry is developed for the improvement of resistance performance as well as for the satisfaction to the Standard of Fishing Convention, ILO. Through the modification of reference hull form parameters and local characteristics, the hull form development is carried out. The optimum hull form parameters are searched by Sequential Quadratic Programing(SQP) method with the power estimation method of Holtrop & Mannen. To minimize the wave resistance,bulbous bow parameters are determined by the bulbous bow design method of Alvarino. The plasmatic curve is redesigned from that of the reference hull by using Lackenby method. The resistance performances of the reference and designed hull forms are estimated by using numerical simulation method. Also, the judgment of seakeeping ability and the estimation of intact stability for the designed hull form is carried out. As a result, the optimum hull form is proposed. To verify the improvement of resistance performance, model tests are carried out in towing tank. The results show that the resistance of the designed hull form is about 14% smaller than that of the reference hull from at design speed. A new hull form proposed in this study can contribute to the development of the main vessel hull form of Korean large purse seiner fishing system.
Abstract
In this study, hull form of main vessel of Korean large purse seiner fishing industry is developed for the improvement of resistance performance as well as for the satisfaction to the Standard of Fishing Convention, ILO. Through the modification of reference hull form parameters and local characteristics, the hull form development is carried out. The optimum hull form parameters are searched by Sequential Quadratic Programing(SQP) method with the power estimation method of Holtrop & Mannen. To minimize the wave resistance,bulbous bow parameters are determined by the bulbous bow design method of Alvarino. The plasmatic curve is redesigned from that of the reference hull by using Lackenby method. The resistance performances of the reference and designed hull forms are estimated by using numerical simulation method. Also, the judgment of seakeeping ability and the estimation of intact stability for the designed hull form is carried out. As a result, the optimum hull form is proposed. To verify the improvement of resistance performance, model tests are carried out in towing tank. The results show that the resistance of the designed hull form is about 14% smaller than that of the reference hull from at design speed. A new hull form proposed in this study can contribute to the development of the main vessel hull form of Korean large purse seiner fishing system.
참고문헌 (19)
- Alvarino, Ricardo, "El Proyecto Básico del Buque Mercante" (1997), Fundo Editorial de Ingeniería Naval, Colegio de Ingenieros Navales
- Andrew, Z., "Optimization of hull form for seakeeping performance", The Fifth International Symposium on Practical Design of Ship and Mobil Units (1992)
- 최희종, "SQP법을 이용한 최적선형개발에 대한 연구", 한국항해항만학회지, 30(10), pp.867~873 (2006), 한국항해항만학회
- 최낙경, "경제성 기준 선망어업의 최적선단 구성에 관한 연구", 한국해양공학회지, 16(6), pp.76~81 (2002), 한국해양공학회
- Doust, D.J., "Trawler Forms with Bulbous Bows", BSRA Technical Memorandum, No. 118, ~ (1960)
- Holtrop, J., "An Approximate Power Prediction Method", International Shipbuilding Progress, 29(335), pp.166~170 (1982)
- ILO, "International labour standards policy", ~ (2007)
- Kang, D. S., "A Study on the Estimation of Effective Horsepower and a Design Method of Hull Form with Minimal Resistance for Korean Small Fishing Vessels", 박사, pp.2006
- Comparison of ITTC-78 and Standard Ship Performance Prediction Methods, "Kenneth, M. F.", Hydromechanics Directorate, ~, pp.NSWCCD-50- TR--2001 (2001), 033.
- 김현수, "수치해석과 모형시험을 이용한 트롤어선의 선형개발", 한국기계기술학회지, 11(2), pp.15~21 (2009), 한국기계기술학회
- Kracht, A. M., "Design of Bulbous Bow", SNAME Transactions, 86, pp.197~217 (1978)
- Lackenby, H., "On the Systematic Geometrical Variation of Ship Forms", Trans. INA, 92, pp.289~315 (1950)
- Lawrence, C., "User's Guide for CFSQP Version 2.5 : A C Code for Solving(Large Scale) Constrained Nonlinear(Minmax) Optimization Problems, Generating Iterates Satisfying All Inequality Constraints, Institute for Systems Research", University of Maryland, ~ (1997)
- Study on the Estimation Method of EHP of Fishing Boats and Optimization Technique of Hull Form Parameters having Low Resistance, "Lee, Y. G.", KIMM, ~, pp.UCN131H-270.D. (1982)
- Lee, Y. G., "A Study on the EHP Estimation and Design Procedure of Small Fishing Boat's Hull Form", Journal of the Society of Naval Architects of Korea, 21(3), pp.1~10 (1984)
- 지현우, "한국 저속 소형 연안어선의 저항성능", 대한조선학회 논문집, 46(1), pp.10~23 (2009), 대한조선학회
- Ministry for Food, Agriculture, Forestry and Fisheries(Mifaff), "Fishing Vessel Law, Republic ofKorea", ~ (2010)
- National Fisheries Research Development Institute(NFRDI), "A research on the LaborsavingMethod for the Fleet Fishing Vessels, Republic ofKorea", ~ (2000)
- The Society of Naval Architects of Korea (SNAK), "Shipbuilding Technics" (2011), Jisungsa