AEM을 이용한 철근콘크리트 모형 구조물의 붕괴 모델링
Collapse Modeling of model RC Structure Using Applied Element Method
0
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
구조물의 비선형적인 대변위 붕괴거동을 해석하기 위해 다양한 수치 해석에 대한 연구가 진행되어 왔다. 본 연구에서는 새로운 수치해석 기법인 Applied Element Method (AEM)를 이용하여 철근 콘크리트 모형 구조물의 발파해체 붕괴거동을 모사하였다. 모형 구조물의 발파해체 붕괴거동과 수치해석으로 모사된 구조물의 붕괴거동을 X 방향(수평방향)의 변위와 Z 방향(수직방향)의 변위에 대해 비교한 결과, 수치해석에서 모사된 구조물의 붕괴거동은 실제 모형 구조물의 붕괴거동을 사실적으로 모사할 수 있음을 확인하였다.
Abstract
In order to analyze collapse behavior of structure containing irregular and large displacement, many numerical analyses have been conducted. In this study, using a new method, Applied Element Method (AEM) for collapse analysis of structures, collapse behavior of model RC structures is simulated. From these simulations results, displacement of X-direction (or horizontal) and displacement of Y-direction (or vertical) is similar to that of model RC structures. It is confirmed that collapse behavior of structures using AEM is reliable accurately simulated with that of model RC structures.
참고문헌 (16)
- 박훈, "전도공법에 의한 축소모형 철근콘크리트 구조물의 지반진동 특성", 한국지구시스템공학회지, 44(6), pp.517~525 (2007), 한국지구시스템공학회
- 박훈, "전도공법에 의한 축소모형 철근콘크리트 구조물의 붕괴거동", 터널과 지하공간, 17(5), pp.381~388 (2007), 한국암반공학회
- 철근콘크리트 구조물 발파해체의 FEA 시뮬레이션 연구, 한･중･일 3국의 발파해체 기술현황 및 활성화 방안, "양준", 주택도시연구원, 165~182 (2006)
- ASI, "Extreme Loading for Structures Technical Manual", 5~33 (2006)
- Chen, B., "Simulation Study on Demolition Blasting of Frame Structure Buildings", The Asian-Pacific Symposium on Blasting Techniques, pp.322~325 (2007)
- Choi, J. H., "Numerical analysis of collapsing behaviors of RC Rahmen Structures using blast demolition", 3rd International Conference on Explosives and Blasting, pp.145~152 (2008)
- Isobe, D., "Analysis of structurally discontinuous reinforced concrete building frames using the ASI technique", Computers and Structures, 76, pp.471~481 (2000)
- Katsuyama, K., "Demolition of storehouse by the blasting and the simulation of the demolition by DDA method", Proceedings of the Annual Conference on Explosives and Blasting Technique, pp.268~275 (1996), International Society of Explosives Engineers
- Ohtsuka, N., "Deformation measurement and FEM simulation of a reinforced concrete building during controlled demolition", Proceedings of the Australasian Congress on Applied Mechanics, pp.643~648 (1996)
- Okamura, H., "Nonlinear analysis and constitutive models of reinforced concrete" (1991), Gihodo Co. Ltd.
- Park, H., "A study on explosive demolition of the cylindrical silo structure", 3rd International Conference on Explosives and Blasting, pp.103~117 (2008)
- Ristic, D., "Stress- strain based modeling of hystertic structures under earthquake induced bending and varying axial load" (1986), Kyoto University
- Tosaka, N., "Computer simulation for felling patterns of building, Demolition and Reuse of Concrete and Masonry", Proceedings of the Second International Symposium held by RILEM, pp.395~403 (1988), Chapman and Hall
- Yang, G., "Numerical Simulation of Frame-shear Wall Structure Blasting Demolition", The Asian-Pacific Symposium on Blasting Techniques, pp.314~317 (2007)
- Yarimer, E., "Demolition by controlled explosion as a dynamical process", Proc. of 1st Int. Conf., pp.411~416 (1989)
- Yarimer, E., "Factors affecting the numerical modeling of demolition by explosive", Structures under Shock and Impact 3rd International Conference, pp.11~20 (1994)