분말형 박층 뿜칠 라이너 시작품의 제작과 성능평가
Development of a Powder-type Thin Spray-on Liner and Its Performance Evaluation at Different Curing Ages
0
조회
0
다운로드
7
인용
0
참고문헌
키워드
초록
박층 뿜칠 라이너(TSL)는 숏크리트와 철망을 대체하는 새로운 암반 지보재로서 고려되고 있다. 하지만 아직까지 TSL의 핵심 제작기술이 공개되지 않은 관계로 독자적인 TSL 개발이 요구되고 있다. 따라서 본 연구에서는 TSL의 개발을 위한 첫 번째 단계로서, 2가지의 경제적인 분말형 TSL 시작품 배합조건들을 도출하였고 이들을 액상 및 분말 재료가 혼합되는 2성분 외국산 TSL의 역학적 성능들과 실험적으로 비교하였다. 실험결과, 1가지 TSL 시작품 배합조건은 파괴 시의 신장률이 낮게 나타나 지보재로서의 활용이 어려운 것으로 나타났으나, 나머지 TSL 시작품 배합조건은 기존 외국산 TSL보다 큰 인장강도와 부착강도를 발현하는 등 우수한 성능을 나타내었으며 유럽 EFNARC(2008)의 모든 성능기준을 만족하여 지보재로서 활용이 가능한 것으로 검증되었다. 단, 외국산 2성분 TSL과 비교할 때 TSL 시작품의 연성을 추가적으로 향상시키기 위한 보완이 필요한 것으로 나타났다.
Abstract
Thin Spray-on Liner (TSL) has been considered as a new rock support to replace shotcrete as well as wire mesh. However, the development of its original production technology is highly in demand since it is not open to the public. Therefore, two kinds of powder-type TSL prototypes were developed as the first development stage. Then, their mechanical properties were experimentally compared with those of a two-component foreign TSL material including both of liquid and powder components. From a series of experiments, the first TSL prototype mixing condition satisfied every TSL performance requirements specified by EFNRAC (2008), and showed much higher tensile and bond strengths than those of the two-component foreign TSL, even though the other TSL prototype cannot be used as a support member since its elongation at break is much lower than its corresponding EFNARC (2008) performance criterion. In addition, a further study to increase the ductility of the first TSL prototype might be necessary to guarantee its higher applicability to field conditions.
참고문헌 (14)
- Ahn, Taesang, "Thermal and mechanical studies of Thin Spray-on Liner (TSL) for concrete tunnel linings", Ph.D., pp.2011
- ASTM, "Standard Test Method for Tensile Properties of Plastics, D638-10", ~ (2010)
- Archibald, J. F., "Australian Centre for Geomechanics", pp.73~87 (2004)
- 장수호, "폴리머 기반 박층 라이너의 초기재령 특성 평가를 위한 실험적 연구", 터널과 지하공간, 23(5), pp.413~427 (2013), 한국암반공학회
- EFNARC, "Specification and Guidelines on Thin Spray-on Liners for Mining and Tunnelling", ~ (2008)
- 한진태, "터널 지보재로서의 적용성 검토를 위한 박층 뿜칠 라이너의 부착성능과 지보성능의 평가", 한국터널지하공간학회 논문집, 15(6), pp.571~583 (2013), 사단법인 한국터널지하공간학회
- ITAtech design guidance for spray applied waterproofing membranes, "ITAtech", ITAtech Activity Group Lining and Waterproofing, 2~, pp.ITAtech Report No. 2 (2013)
- Lau, V., "Laboratory Investigation of Support Mechanism for Thin Spray-on Liners", Proceedings of the 12th International Conference of International Association for Computer Methods and Advances in Geomechanics(IACMAG), pp.1381~1388 (2008)
- Povin, Y., "Surface Support in Mining", pp.3~43 (2004), Australian Centre for Geomechanics
- Roberts, R., "Time to look below the surface of membranes", pp.62~63 (2001), Australian Mining Monthly
- Saydam, S., "Ground Control - Use of Liner Support in Mining, Presentation file, MINE4300 - GEOTECHNICAL ENGINEERING", School of Mining Engineering, University of New South Wales, ~ (2008)
- Stern, J., "Investigation of the characteristics of thin spray liners(TSL's) and their use as an additional support medium in block cave mining", Proceedings of the 1st international Symposium on Block and Sub-level Caving, pp.217~238 (2007)
- Tannant, D. D., "Thin Spray-on Liners for Underground Rock Support", Proceedings of the 17th International Mining Congress and Exhibition of Turkey - IMCET 2001, pp.57~73 (2001)
- Yilmaz, H., "Shear-bond strength testing of thin spray-on liners", The Journal of The Southern African Institute of Mining and Metallurgy, 107, pp.519~530 (2007)