삼차원 인공 절리면의 생성과 이에 대한 거칠기 특성 평가
Generation of a 3D Artificial Joint Surface and Characterization of Its Roughness
0
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
절리면의 거칠기는 암반의 역학적, 수리적 거동에 중요한 영향을 미치는 요인이다. 따라서 이를 해석하기위한 여러 가지 구성 모델 및 거칠기 정량화 연구가 실험적, 경험적으로 수행되어 왔다. 최근 3D 프린팅 기술의발전은 특정 거칠기를 갖는 절리면을 생성하는 데 활용될 수 있으며 본 논문에서는 이에 적합한 절리면 생성기법을 소개하고 정량적 평가를 수행하였다. 프랙탈 이론에 따른 랜덤중점변위법을 적용하였으며 생성된 절리면의 거칠기 평가는 Z2의 분포를 계산하여 수행하였다. 그 결과 입력변수 제어를 통하여 목표로 한 거칠기를구현할 수 있었으며 더 나아가 특정 거칠기 이방성비를 갖는 절리면을 생성할 수 있음을 확인하였다.
Abstract
Roughness of a joint surface is one of the most important parameters that affects the mechanical and hydraulic behavior of rock mass. Therefore, various studies on making constitutive model and/or roughness quantification have been conducted in experimental and empirical manners. Advances in recent 3D printing technology can be utilized to generate a joint surface with a specific roughness. In this study, a reliable technique to generate a rough joint surface was introduced and its quantitative assessment was made. Random midpoint displacement method was applied to generate a joint surface and the distribution of Z2 was investigated to assess its roughness. As a result, a certain roughness can be embodied by controlling input parameters and furthermore it was able to generate a joint surface with specific roughness anisotropy.
참고문헌 (13)
- BARTON, N, "The shear strength of rock joints in theory and practice", Rock mechanics, 10(1-2), pp.1~54 (1977)
- BARTON, N., "Suggested methods for the quantitative description of discontinuities in rock masses", ISRM, International Journal of Rock Mechanics and Mining Sciences & Geomechanics, 15(6), pp.319~368 (1978)
- BEER, A., "Technical note estimation of the joint roughness coefficient (JRC)by visual comparison", Rock Mechanics and Rock Engineering, 35(1), pp.65~74 (2002)
- BELEM, T., "Quantitative parameters for rock joint surface roughness", Rock mechanics and rock engineering, 33(4), pp.217~242 (2000)
- LEE, Y. -H., "The fractal dimension as a measure of the roughness of rock discontinuity profiles", International journal of rock mechanics and mining sciences & geomechanics, 27(6), pp.453~464 (1990)
- LI, Y., "Quantitative estimation of joint roughness coefficient using statistical parameters", International Journal of Rock Mechanics and Mining Sciences, 77, pp.27~35 (2015)
- TATONE, B. S, "A new 2D discontinuity roughness parameter and its correlation with JRC", International Journal of Rock Mechanics and Mining Sciences, 47(8), pp.1391~1400 (2010)
- TSE, R, "Estimating joint roughness coefficients", International journal of rock mechanics and mining sciences & geomechanics, 16(5), pp.303~307 (1979)
- XIE, H, "Fractals in rock mechanics" (1993), A.A. Balkema
- YANG, Z., "Reassessing the joint roughness coefficient (JRC) estimation using Z2", Rock mechanics and rock engineering, 34(3), pp.243~251 (2001)
- YU, X, "Joint profiles and their roughness parameters", International journal of rock mechanics and mining sciences & geomechanics, 28(4), pp.333~336 (1991)
- 박정욱, "암석 절리면 거칠기의 새로운 3차원 정량화 계수", 터널과 지하공간, 22(2), pp.106~119 (2012), 한국암반공학회[DOI]
- 서현교, "랜덤중점변위법에 의한 거칠기의 생성 및 활용에 관한 연구", 터널과 지하공간, 22(3), pp.196~204 (2012), 한국암반공학회[DOI]