TBM 제작 사양을 추정하기 위한 데이터베이스의 구축과 통계분석
A Database to Estimate TBM Manufacturing Specifications and Its Statistical Analysis
1
조회
0
다운로드
1
인용
0
참고문헌
키워드
초록
TBM의 제작 사양은 제작사들의 노하우에 의해 경험적으로 설계되고 있다. TBM 제작 사양은 TBM의굴착성능과 가격을 좌우하기 때문에, TBM의 설계 단계에서 이를 데이터에 근거하여 결정하는 것이 매우 중요하다. 따라서 본 연구에서는 다양한 현장에서 사용된 TBM들의 정보를 수집하여 데이터베이스를 구축하였고, 이를통계적으로 분석하여 TBM의 제작 사양을 추정하기 위한 상관관계들을 제시하고자 하였다. 분석 결과, TBM 최대 추력, 최대 토크, 공칭 토크 및 커터헤드 구동 동력과 같은 TBM의 최대 제작 용량은 지반조건이나 TBM의형식보다는 TBM의 외경, 즉 TBM의 굴착단면적에 지배적인 영향을 받는 것으로 파악되었다.
Abstract
Generally, TBM specifications have been empirically designed by the know-hows of its manufacturers. Since they govern the excavation performance and the cost of TBMs, it is very crucial to reliably determine them in the design stage of TBMs. In this study, a database consisting of TBM data collected from a various kinds of TBM tunnel projects was built to propose the statistical correlations for estimating TBM main specifications. From the statistical analyses, TBM outer diameters are found to have a strong effect on the TBM specifications such as thrust, torque and cutterhead driving power, which are much more important than TBM types and ground conditions.
참고문헌 (17)
- Acaroglu, O., "Prediction of thrust and torque requirements of TBMs with fuzzy logic models", Tunnelling and Underground Space Technology, 26, pp.267~275 (2011)
- Avunduk, E., "Empirical modeling for predicting excavation performance of EPB TBM based on soil properties", Tunnelling and Underground Space Technology, 71, pp.340~353
- 장수호, "TBM 굴진자료의 다변량 회귀분석에 의한 암반대응형 TBM의 설계모델 도출", 한국터널지하공간학회 논문집, 13(6), pp.531~555 (2011), 사단법인 한국터널지하공간학회
- 장수호, "쉴드터널 세그먼트 라이닝의 최신 기술동향과 핵심 설계항목의 통계 분석", 터널과 지하공간, 21(6), pp.427~438 (2011), 한국암반공학회
- Cho, J. -W., "Evaluation of cutting efficiency during TBM disc cutter excavation within a Korean granitic rock using linear-cutting-machine testing and photogrammetric measurement", Tunnelling and Underground Space Technology, 35, pp.37~54 (2013)
- Copur, H., "Predicting performance of EPB TBMs by using a stochastic model implemented into a deterministic model", Tunnelling and Underground Space Technology, 42(1), pp.1~14 (2014)
- Geng, Q., "Mechanical performance of TBM cutterhead in mixed rock ground conditions", Tunnelling and Underground Space Technology, 57, pp.76~84 (2016)
- Gertsch, R., "Disc cutting tests in Colorado Red Granite: Implications for TBM performance prediction", International Journal of Rock Mechanics and Mining Sciences, 44, pp.238~246 (2007)
- Gonzalez, C., "Thrust and torque components on mixed-face EPB drives", Tunnelling and Underground Space Technology, 57, pp.47~54 (2016)
- Howarth, D. F., "Database of TBM projects undertaken between 1950 and 1990 and an assessment of associated ground-strength limitations", Tunnelling and Underground Space Technology, 9, pp.209~213 (1994)
- Development of optimized TBM cutterhead design method and high-performance disc cutter, "KICT (Korea Institute of Civil Engineering and Building Technology)", ~ (2015)
- 박영택, "로드헤더의 굴착 원리와 데이터베이스를 활용한 로드헤더핵심 설계 항목의 통계분석", 터널과 지하공간, 23(5), pp.428~441 (2013), 한국암반공학회
- Rostami, J., "A New Model for Performance Prediction of Hard Rock TBMs", Proc. of Rapid Excavation and Tunneling Conference(RETC), pp.793~809 (1993)
- Salimi, A., "Application of non-linear regression analysis and artificial intelligence algorithms for performance prediction of hard rock TBMs", Tunnelling and Underground Space Technology, 58, pp.236~246 (2016)
- Shahriar, K., "Geotechnical risk assessment based approach for rock TBM selection in difficult ground conditions", Tunnelling and Underground Space Technology, 23, pp.318~325 (2008)
- Wittke, W., "Stability Analysis and Design for Mechanized Tunneling" (2007), WBI GmbH
- Yagiz, S., "Application of various optimization techniques and comparison of their performances for predicting TBM penetration rate in rock mass", International Journal of Rock Mechanics and Mining Sciences, 80, pp.308~315 (2015)