암석파괴역학에 의한 3차원 절리면의 진행성 파괴 모델
A Three-Dimensional Progressive Failure Model for Joints Considering Fracture Mechanics and Subcritical Crack Growth in Rock
0
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
암석파괴역학과 파괴인성(rock fracture toughness) 이하의 응력확대계수(stress intensity factor)에서 균열이 성장하는 현상을 이용하여 암석 절리면의 비선형 강도특성과, 시간의 경과에 따라 파괴가 진행되는 특성을 고려한 수치해석용 3차원 절리면 요소를 개발하였다. 이 절리면 요소를 사용하여 암석 절리면 전단시험을 수치해석으로 모사한 결과, 전단응력이 증가하고 시간이 경과함에 따라 절리면 사이에 연결된 절리면 내 접점(asperity in joint)에서 암석의 파괴인성보다 응력확대계수가 작음에도 불구하고 균열이 발생하였고 시간이 경과하면서 균열이 성장, 절리면 내 접점이 파괴되었다. 이와 같이 각각의 절리면 내 접점의 파괴에 따라 절리면의 강도는 감소하고, 절리면의 전단응력은 응력경화와 응력연화 후 잔류응력에 도달하는 비선형거동을 보이면서 시간의 경과에 따라 점진적으로 파괴되었다.
Abstract
A three dimensional rock joint element was developed considering fracture mechanics and subcritical crack growth to simulate non-linear behavior and the progressive failure of rock joints. Using this 3-D joint element, joint shear tests of rock discontinuities were simulated by a numerical method. The asperities on the joint surface began to fail at stress levels lower than the rock fracture toughness and continued progressively due to subcritical crack growth. As a result of progressive failing in each and every asperity, the joint showed non-linear stress-time behavior including stress hardening/softening and the reaching of a residual stress.
참고문헌 (15)
- Atkinson BK., "Subcritical crack growth in geological materials", J Geophys Res, 89(B6), pp.4077~4114 (1984)
- Atkinson BK, "Fracture mechanics of rock" (1987), Acedemic Press
- Barton N., "Review of a new shear strength criterion for rock joints", Engr Geol., 7, pp.287~332 (1973)
- Barton N, "Review of predictive capabilities of JRC-JCS model in engineering practice", Rock Joints, proceeding of the International symposium on rock joints, pp.603~610 (1990)
- Charles R.J., "Static fatigue of glass", J.Appl phys., 29, pp.1549~1560 (1958)
- Eberhardt E, "An integrated numerical analysis approach to the Randa rockslide", First European conference on landslides, pp.255~262 (2002)
- 3-dimensional distinct element code (3DEC) ver.4.1, "Itasca", Minneapolis:Itasca Consulting Group, Inc., ~ (2007)
- J. M. Kemeny, "An asperity model to simulate rupture along heterogeneous fault surfaces", Pageoph, 138(4), pp.549~567 (2002)
- J. Kemeny, "The time-dependent reduction of sliding cohesion due to rock bridges along discontinuities: A fracture mechnics approach", Rock mechanics Rock engng, 36(1), pp.27~38 (2003)
- J. Kemeny, "Time-dependent drift degradation due to progressive failure of rock bridges along discontinuities", Int J Rock Mech Min Sci., 42, pp.35~46 (2005)
- Kemeny JM, "A model for non-linear rock deformation under compression due to sub-critical crack growth", Int J Rock Mech Min Sci., 28(6), pp.459~467 (1991)
- Michalske, T. A., "A molecular interpretation of stress corrosion in silica", Nature, 295, pp.511~512 (1982)
- Ojala IO, "Correlation of microsesmic and chemical properties of brittle deformation in Locharbriggs sandstone", J Geophys Res, 108(B5), pp.2268~ (2003)
- Rooke D, "Compendium of stress intensity factors", London HMSO, 330 (1976)
- Large scale slope stability in open pit mining-a review, "Sjoberg J.", Lulea University of Technology, 229~, pp.Technical Report 1996.10T (1996)