본문 바로가기
KERD
논문KCI 등재

선박의 파랑 중 운항성능을 고려한 초기 선형설계에 대한 연구

Study on Ship Performance in a Seaway for Application to Early Stage of Hull-Form Design

1

조회

0

다운로드

2

인용

0

참고문헌

키워드

주제분류조선공학

초록

This paper introduces a study on ship performance in waves to consider the effects of added resistance in the early stage of hull-form design. A ship experiences a loss of speed in actual seaways, hence this study proposes the overall procedure of a new design concept that takes into account the hydrodynamic performance of ship in waves. In the procedure, the added resistance is predicted using numerical methods: slender-body theory and Maruo's far-field formulation, since these methods are efficient in initial design stage, and an empirical formula is adopted for short waves. As computational models, KVLCC2 hull and Supramax bulk carrier are considered, and the results of added resistance and weather factor for test models are discussed. The computational results of vertical motion response and added resistance of KVLCC2 hull are compared with the experimental data. In addition, the sensitivity analysis of added resistance and weather factor for KVLCC2 hull to the variations of ship dimensions are conducted, and the change of the added resistance and propulsion factors after hull form variations are discussed.

Abstract

This paper introduces a study on ship performance in waves to consider the effects of added resistance in the early stage of hull-form design. A ship experiences a loss of speed in actual seaways, hence this study proposes the overall procedure of a new design concept that takes into account the hydrodynamic performance of ship in waves. In the procedure, the added resistance is predicted using numerical methods: slender-body theory and Maruo's far-field formulation, since these methods are efficient in initial design stage, and an empirical formula is adopted for short waves. As computational models, KVLCC2 hull and Supramax bulk carrier are considered, and the results of added resistance and weather factor for test models are discussed. The computational results of vertical motion response and added resistance of KVLCC2 hull are compared with the experimental data. In addition, the sensitivity analysis of added resistance and weather factor for KVLCC2 hull to the variations of ship dimensions are conducted, and the change of the added resistance and propulsion factors after hull form variations are discussed.

참고문헌 (36)

  1. Choi, Y.R., "An analysis of second-order wave forces on floading bodies by using a higher-order boundary element method", Ocean Engineering, 28, pp.117~138 (2000)
  2. Chuang, Z., "Speed loss of a vessel sailing in oblique waves", Ocean Engineering, 64, pp.88~99 (2013)
  3. Faltinsen, O.M, "Prediction of resistance and propulsion of a ship in a seaway", 13th Symposium on Naval Hydrodynamics (1980)
  4. Feng, P.Y., "Long-term prediction of speed reduction due to waves and fuel consumption of a ship at actual seas", 29th International Conference on Ocean, Offshore and Arctic Engineering (2010)
  5. Fujii, H, "Experimental study on the resistance increase of a ship in regular oblique waves", 14th International Towing Tank Conference, pp.351~360 (1975)
  6. Fujiwara, T., "Cruising performance of a large passenger ship in heavy sea", 16th International Offshore and Polar Engineering Conference (2006)
  7. Gerritsma, J, "Analysis of the resistance increase in waves of a fast cargo ship", International Shipbuilding Progress, 19(217), pp.285~293 (1972)
  8. Grigoropoulos, G. J., "Hull form optimization for hydrodynamic performance", Marine Technology, 41(4), pp.167~182 (2004)
  9. Holtrop, J, "An approximate power prediction method", International Shipbuilding Progress, 29, pp.166~170 (1982)
  10. IMO, "Interim guidelines for the calculation of the coefficient fw for decrease in ship speed in a representative sea condition for trial use", IMO MEPC.1, 2012
  11. ISO, "Ships and marine technology – guidelines for the assessment of sSpeed and power performance by analysis of speed trial data", ISO 15016: 2015, ~ (2015)
  12. ITTC, "Prediction of power increase in irregular waves from model test", ITTC – Recommended Procedure 7.5-02-07-02.2, ~ (2011)
  13. Joncquez, S.A.G, "Second-order forces and moments acting on ships in waves", Ph.D, pp.2009
  14. Experiments and calculations on 4 wigley hull forms in head waves, "Journee, J. M. J.", Delft University of Technology, ~, pp.Delft University of Technology Technical Report No 0909 (1992)
  15. Kashiwagi, M., "Effect of forward speed of a ship on added resistance in waves", Journal of Offshore and Polar Engineering, 20(3), pp.196~203 (2010)
  16. Kuroda, M., "Investigation on components of added resistance in short waves", Journal of the Japan Society of Naval Architects and Ocean Engineering, 8, pp.171~176 (2008)
  17. Kim, H, "Prediction of added resistance of a ship in waves using computational fluid dynamics", Annual Autumn Meeting (2015)
  18. 김용환, "시간영역 랜킨 패널법에 의한 선박 부가저항의 수치해석", 대한조선학회 논문집, 47(3), pp.398~409 (2010), 대한조선학회
  19. Kim, K.H., "Numerical study on added resistance on ships by using a time-domain rankine panel method", Ocean Engineering, 38, pp.1357~1367 (2011)
  20. Development of the key technology for a ship drag reduction and propulsion efficiency omprovement, "Korea Institute of Ocean Science and Technology", KIOST, ~ (2013)
  21. Manen, J.D.van, "Principles of naval architecture" (1988), Society of Naval Architects and Marine Engineers
  22. Maruo, H., "The drift of a body floating on waves", Journal of Ship Research, 4(3), pp.1~10 (1960)
  23. Newman, J. N., "The drift force and moment on ships in waves", Journal of Ship Research, 11, pp.51~60 (1967)
  24. Newman, J. N., "The evaluation of free-surface green function", 4th international conference on Numerical Ship Hydrodynamics (1985)
  25. Park, D.M., "Uncertainty analysis for added resistance experiment of KVLCC2ship", Ocean Engineering, 95, pp.143~156 (2015)
  26. Park, D.M, "Study on added resistance of a tanker in head waves at different drafts", Ocean Engineering, 111, pp.569~581 (2016)
  27. Prpic-Orsic, J, "Estimation of ship speed loss and associated CO2 emissions in a seaway", Ocean Engineering, 44, pp.1~10 (2012)
  28. Salvesen, N., "Ship motions and sea loads", Transactions of Society of Naval Architects and Marine Engineers, 78, pp.250~279 (1970)
  29. Salvesen, N., "Added resistance of ship in waves", Journal of Hydronautics, 12(1), pp.24~34 (1978)
  30. User’s manual of NIIRID, MIT Report, "Sclavounos, P. D.", MIT, ~ (1985)
  31. Seo, M.G., "Comparative study on computation of ship added resistance in waves", Ocean Engineering, 73(5), pp.1~15 (2013)
  32. Tasrief, M., "Improvement of ship performance based on sensitivity study to the added resistance", 24th International Ocean and Polar Engineering Conference (2014)
  33. Tsujimoto, M., "A practical correction method for added resistance in waves", Journal of the Japan Society of Naval Architects and Ocean Engineers, 8, pp.141~146 (2008)
  34. Van, S.H, "Experimental investigation of the flow characteristics around practical hull forms", 3rd Osaka Colloquium on Advanced CFD Applications to Ship Flow and Hull Form Design (1998)
  35. 양경규, "단파장 영역에서의 부가저항 해석", 대한조선학회 논문집, 52(4), pp.338~348 (2015), 대한조선학회
  36. Zalek, S.F, "Naval hull form multicriterion hydrodynamic optimization for the conceptual design phase", Journal of Ship Research, 53(4), pp.199~213 (2009)

관련 논문AI추천

이 간행물의 다른 논문 (9건)