잠수함의 제어판 재밍에 대한 안전운항영역 설정
A Study on the Safety Operational Envelope of a Submarine in Jamming
1
조회
0
다운로드
0
인용
0
참고문헌
키워드
초록
Safety operational envelope (SOE) is the area which guarantees the safety of a submarine from the accident such as jamming and flooding. The maximum safe depth is set to prevent the damage to the hull from increasing water pressure with depth. A minimum safety depth is set to prevent a submarine from the exposure above the free surface and collision against surface ship. The prediction method for the SOE in the design phase is needed to operate the submarine safely. In this paper, the modeling and calculation methods of the SOE are introduced. Main ballast tank blowing modeling and propeller force modeling are conducted to simulate the accidents and the recovery process. The SOEs are established based on the crash stop and emergency rising maneuver simulation. From the simulation results, it can be known that the emergency rising maneuver is more effective recovery action than the crash stop.
Abstract
Safety operational envelope (SOE) is the area which guarantees the safety of a submarine from the accident such as jamming and flooding. The maximum safe depth is set to prevent the damage to the hull from increasing water pressure with depth. A minimum safety depth is set to prevent a submarine from the exposure above the free surface and collision against surface ship. The prediction method for the SOE in the design phase is needed to operate the submarine safely. In this paper, the modeling and calculation methods of the SOE are introduced. Main ballast tank blowing modeling and propeller force modeling are conducted to simulate the accidents and the recovery process. The SOEs are established based on the crash stop and emergency rising maneuver simulation. From the simulation results, it can be known that the emergency rising maneuver is more effective recovery action than the crash stop.
참고문헌 (22)
- Bettle, M.C., "Unsteady analysis of the six DOF motion of a buoyantly rising submarine", Computers & Fluids, 38(9), pp.1833~1849 (2009)
- Feldman, J., "DTNSRDC revised standard submarine equation of motion" (1979), David W. Taylor Naval Ship R&D Center
- Feldman, J., "Method of performing captive-model experiments to predict the stability and control characteristics of submarines" (1995), Carderock Division Naval Surface Warfare Center
- Standard equation of motion for submarine simulation, "Gertler, M.", David W. Taylor Naval Ship R&D Center, ~, pp.NSRDC-Report SR 009 01 01, Task 0102 (1967)
- 정재훈, "강제선회시험을 이용한 수중운동체의 유체력 미계수 추정", 한국해양공학회지, 30(1), pp.25~31 (2016), 한국해양공학회
- 정진우, "VPMM 시험을 통한 무인 수중 글라이더 모형의 동유체력 계수 추정에 관한 연구", 한국해양공학회지, 28(2), pp.119~125 (2014), 한국해양공학회
- 김연규, "몰수체의 CPMC 구속모형시험", 대한조선학회 논문집, 49(4), pp.296~303 (2012), 대한조선학회
- 이종훈, "6자유도 운동을 고려한 수중운동체의 안전운항영역 평가에 관한 연구", 석사, 조선해양공학, pp.2004
- Tests of a submarine model in coning motion, "Lewandowski, E.", Stevens Institute of Technology, ~, pp.Davidson laboratory technical Report 2660 (1991)
- Mackay, M, "DREA submarine simulation program version 0.2 (DSSP02) - Release notes, DREA TC 92", 308, April, DISTRIBUTION LIMITED, 1992
- Nguyen, V.D., "Interference of various support strut configurations in wind tunnel tests on a model submarine", Proceedings of the 33rd Aerospace Sciences Meeting and Exhibit (1995)
- Park, J.Y., "Design of a safety operational envelope protection system for a submerged body", Ph.D, pp.2016
- 박종용, "몰수체의 원추형시험에 관한 연구", 한국해양공학회지, 29(6), pp.436~444 (2015), 한국해양공학회
- 박종용, "잠수함의 종동요각 한계예측 알고리즘 설계", 한국해양공학회지, 30(2), pp.134~140 (2016), 한국해양공학회
- Phase I experimental testing of a generic submarine model in the DSTO low speed wind tunnel, "Quick, H.", Defence Science and Technology Organisation, ~, pp.DSTO Technical Note, DSTO-TN-1101 (2012)
- Phase II experimental testing of a generic submarine model in the DSTO low speed wind tunnel, "Quick, H", Defence Science and Technology Organisation, ~, pp.DSTO Technical Note, DSTO-TN-1274 (2014)
- Rhee, K.P., "An experimental study on hydrodynamic coefficients of submerged body using planar motion mechanism and coning motion device", International Workshop on Ship Maneuverability, 2000, pp.1~20 (2000)
- 설동명, "수중운동체의 잠수심도에 따른 수평면내 조종성능 변화에 대한 실험적 연구", 대한조선학회 논문집, 42(6), pp.551~558 (2005), 대한조선학회
- 신용구, "수중함의 긴급기동 해석을 위한 유체력계수 모델링에 관한 연구", 대한조선학회 논문집, 42(6), pp.601~607 (2005), 대한조선학회
- 신용구, "수중함 기동성능 해석을 위한 유체력계수의 이론적 추정에 관한 연구", 박사, 조선해양공학, pp.2007
- Society of Naval Architects of Korea, "Warship", pp.358~360 (2012), Textbooks
- Modelling and simulating unsteady six degrees-of-freedom submarine rising maneuvers, "Watt, G.D.", Defence Research and Development Canada, ~, pp.DRDC Atlantic TR 2007-008 (2007)