임계지역 석회암의 일축압축강도와 점하중강도지수의 상관관계 연구
A Study on the Correlation between Uniaxial Compressive Strength and Point Load Strength Index of Limestone of Imgye Area
1
조회
0
다운로드
3
인용
0
참고문헌
키워드
초록
일축압축강도(UCS)는 암석의 주요 물성 중 하나이다. 그러나 항상 UCS 실험을 위한 시료를 취득할수는 없다. 이러한 경우 점하중시험과 같은 간접시험법이 유용한 대안이 될 수 있다. 본 연구에서는 임계지역에분포하는 석회암을 대상으로 일축압축강도와 점하중강도지수 사이의 상관관계를 분석하였으며 선형 회귀식이제안되었다. 또한 석회암을 대상으로 수행된 이전 연구결과와 이번 연구 결과를 비교하였다. 동일한 암종이라도국내에서 분포하는 지역에 따라 변환계수가 다를 수 있으며, 분석의 정확성을 높이기 위해서는 더 많은 자료가필요할 것으로 판단된다.
Abstract
Though the uniaxial compressive strength (UCS) of rock material is one of the key properties for rockmass characterization purposes, core samples for the test cannot always be obtained from the field. Indirect tests such as the point load test (PLT) can be a useful alternative. In this study, correlation between the UCS and the point load strength index of limestone of Imgye area was analyzed, and the linear regression equation obtained from regression analysis of two variables was suggested. The results of this study were also compared with previous studies on limestone. It was suggested that conversion factors for the same rock type from diverse areas in Korea may have different values, and more data should be obtained to increase the accuracy of regression analysis.
참고문헌 (32)
- Standard test method of unconfined compressive strength of intact rock core specimens, "ASTM", ~, pp.D2938 (1986)
- Basu, A, "Predicting uniaxial compressive strength by point load test: significance of cone penetration", Rock Mech. Rock Eng, 39(5), pp.483~490 (2006)
- Bell F. G, "Laboratory testing of rocks, In Engineering in rock masses", pp.151~169 (1995), Oxford
- Bieniawski, Z. T, "The point load test in geotechnical practice", Eng. Geol, 9, pp.1~11 (1975)
- Broch, E. M, "The point load strength test", Int. J. Rock Mech. Min. Sci, 9, pp.669~697 (1972)
- 차아름, "경기 동부 지역 편마암복합체내의 일축압축강도와 점하중강도의 상관관계에 관한 연구", 한국지반환경공학회 논문집, 8(1), pp.21~26 (2007), 한국지반환경공학회
- Diamantis, K, "Study on uniaxial compressive strength, point load strength index, dynamic and physical properties of serpentinites from central Greece: test results and empirical relations", Eng. Geol, 108, pp.199~207 (2009)
- Grasso, P, "Problems and promises of index testing of rocks", Proc. 33rd US Symp. Rock Mech, pp.879~888 (1992)
- Hawkins, A. B, "Aspects of rock strength", Bull. Eng. Geol. Env, 57, pp.17~30 (1998)
- ISRM, "The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006, In Suggested methods prepared by the commission on testing methods, International Society for Rock Mechanics", pp.628~ (2006), ISRM Turkish National Group
- Geological report of the Pyeongchang･Yeongwolsheets, "Jung, C. K", Korea Institute of Geology, ~ (1979)
- Kang, S. S, "Physical and mechanical properties of volcanic glass in the Samho area, South Korea", Tunnel & Underground Space, 15(3), pp.223~227 (2005), Journal of Korean Society for Rock Mechanics
- 김해경, "고흥지역에 분포하는 백악기 응회암의 역학적 특성에 관한 연구", 지질공학, 14(3), pp.273~285 (2004), 대한지질공학회
- Kohno, M, "Relationship point load strength index and uniaxial compressive strength of hydrothermally altered soft rocks", Int. J. Rock Mech. Min. Sci, 50, pp.147~157 (2012)
- 이규상, "곤지암 지하암반 저장고 온도계측 결과", 터널과 지하공간, 15(3), pp.81~88 (2005), 한국암반공학회
- 이규상, "곤지암 지하암반 저장고 온도계측 결과", 터널과 지하공간, 15(3), pp.81~88 (2005), 한국암반공학회
- KSRM, "Standard test method for point load strength of rock", Tunnel & Underground Space, 17(2), pp.75~82 (2007), Journal of Korean Society for Rock Mechanics
- Lashkaripour, S, "Evaluation of simple methods for assessing the uniaxial compressive strength of rock", Int. J. Rock Mech. Min. Sci, 38, pp.98~994 (2001)
- Lee, C. K, "A study on strength anisotropy characteristic andsuggested methods for determining RQD as for shale", Proceedings of the Korean Society for Rock MechanicsConference, pp.173~180 (2003)
- Lee, D. J, "Survey report of limestone deposit in Uljin, Korea Institute of Geology", Mining and Materials, 2 (1993)
- Survey report (limestone, Jeongseon-Imgye area), "Lee, Y. J", KORES, 39~ (2004)
- Marinos. P, "Laboratory testing aspects of Athenian schist", 7th Congress of the Int. Association of Eng. Geol.(IAEG), 2, pp.975~982 (1994)
- 민덕기, "울산지역 퇴적암의 강도 추정법 연구 - 점 하중 강도지수로 일축 압축강도 추정 -", 한국지반공학회논문집, 22(8), pp.63~75 (2006), 한국지반공학회
- No, J. S, "A study on the brazilian strength behavior of Korean rocks", 박사, pp.2009
- 노진환, "풍촌층 고품위 석회석의 분체 특성 및 분쇄 효과에 관한 응용광물학적 연구", 한국자원공학회지, 44(3), pp.191~207 (2007), 한국자원공학회
- Quane, S. L, "Rock strength as a metric of welding intensity in pyroclastic deposits", Eur. J. Mineral, 15, pp.855~864 (2003)
- Singh, T. N, "Correlation between point load index and uniaxialcompressive strength for different rock types", Rock Mech.Rock Eng, 45, pp.259~264 (2012)
- Sabatakakis, N, "Index properties of soft marly rocks of the Athens basin, Greece", Proc. Int. Symp. Geotech. Engin. of Hard Soils and Soft Rocks, 1, pp.275~279 (1993)
- Sabatakakis, N, "Estimation of physical and mechanical parameters ofrock material", Bull. of the public works central laboratoryof Gress (KEDE), 3(8) (2002)
- Tsiambaos, G, "Considerations on strength of intact sedimentary rocks", Eng. Geol, 72, pp.261~273 (2004)
- Geological report of the Samcheok-Gosari sheets, "Won, C. K", Korea Institute of Geology, Mining and Materials., ~ (1994)
- 우병식, "점하중시험과 경도시험에 의한 암석의 일축압축강도 추정", 석사, 토목공학, pp.2005