원통형 수직 펌프의 공진회피를 위한 접수진동해석
Fluid-Structure Interaction (FSI) Modal Analysis to Avoid Resonance of Cylinder Type Vertical Pump at Power Plant
1
조회
0
다운로드
2
인용
0
참고문헌
키워드
초록
Resonance phenomena occurs at large vertical pump which is operating to cool down the hot steam using sea water in the power plant. To avoid the resonance, the natural frequency needs to be isolated about 20% from motor operating speed. Yet, excessive vibration occurs especially at low tide. At first, natural frequency of the whole pump system and each part is calculated using ANSYS. As it is revealed in the previous journal papers that only circular pipe part is related to resonance, the FSI technique is applied for free vibration analysis. The natural frequency is reduced to 60% (compared to that) of the frequency measured in air as it is similar to other published results. And the frequency obtained by finite element analysis is almost same to that obtained from modal test. Based on the accurate finite element model and analysis, design change is tried to avoid the resonance by changing the thickness of pipe and base supporting plate. In stead of doing optimization process, design sensitivity is computed and used to find such designs to avoid resonance.
Abstract
Resonance phenomena occurs at large vertical pump which is operating to cool down the hot steam using sea water in the power plant. To avoid the resonance, the natural frequency needs to be isolated about 20% from motor operating speed. Yet, excessive vibration occurs especially at low tide. At first, natural frequency of the whole pump system and each part is calculated using ANSYS. As it is revealed in the previous journal papers that only circular pipe part is related to resonance, the FSI technique is applied for free vibration analysis. The natural frequency is reduced to 60% (compared to that) of the frequency measured in air as it is similar to other published results. And the frequency obtained by finite element analysis is almost same to that obtained from modal test. Based on the accurate finite element model and analysis, design change is tried to avoid the resonance by changing the thickness of pipe and base supporting plate. In stead of doing optimization process, design sensitivity is computed and used to find such designs to avoid resonance.
참고문헌 (31)
- Amabili, M., "Free vibration of a fluid-filled circular cylindrical shell with lumped masses attached, using the receptance method", Shock and Vibration, 3(3), pp.159~167 (1995)
- API, "Standard 610, centrifugal pumps for petrochemical and natural gas industries", American Petroleum Institute, ~ (2000)
- Bae, C.H., "Modal analysis in the dynamic behavior identification of the fluid-structure coupled vertical pump", The 2001 Fall Conference of The Korean Society for Noise and Vibration Engineering (2001)
- Bae, C.H., "Vibration characteristics of the vertical pump in a nuclear power plant", The 2006 Fall Conference of The Korean Society for Noise and Vibration Engineering (2006)
- Bae, C.H., "Free vibration analysis of a hanged clamped-free cylindrical shell partially submerged in fluid: The effect of external wall, internal shaft, and flat bottom", Journal of Sound and Vibration, 331, pp.4072~4092 (2012)[DOI]
- 배성용, "접수탱크구조의 진동특성에 관한 연구", 대한조선학회 논문집, 40(4), pp.7~52 (2003), 대한조선학회
- 최봉균, "고전압 장비 지그의 동특성에 대한 위상, 형상 및 치수 최적화", 한국전산구조공학회논문집, 26(5), pp.351~358 (2013), 한국전산구조공학회[DOI]
- Goncalves, P.B.G., "transient stability of empty and fluid-filled cylindrical shells", Journal of the Brazilian Society of Mechanical Science & Engineering, 18(3), pp.331~338 (2006)
- 하윤도, "유체-구조 연성 문제의 형상 최적설계", 대한조선학회 논문집, 44(2), pp.130~138 (2007), 대한조선학회
- Han, R.P.S., "A simple and accurate added mass model for hydrodynamic fluid-structure interaction analysis", Journal Franklin Institute, 333(6), pp.929~945 (1996)[DOI]
- Jang, Y., "Study on Cause for vibration of large vertical pump in power plan", The 2013 Spring Conference of The Korean Society for Noise and Vibration Engineering, pp.674~675 (2013)
- KYEONG-HOON JEONG, "HYDROELASTIC VIBRATION ANALYSIS OF TWO FLEXIBLE RECTANGULAR PLATES PARTIALLY COUPLED WITH A LIQUID", Nuclear Engineering and Technology, 41(3), pp.335~346 (2009), 한국원자력학회
- 정경훈, "유체에 부분적으로 둘러싸인 사각형 용기의 접수진동", 한국소음진동공학회논문집, 25(3), pp.207~215 (2015), 한국소음진동공학회[DOI]
- Kim, K.C., "The vibration of an elastic rectangular plate in a fluid", Journal of the Society of Naval Architects of Korea, 13(4) (1976)
- Kim, K.C., "An experimental study on the elastic vibration of plates in contact with water", Journal of the Society of Naval Architects of Korea, 16(2), pp.1~7 (1979)
- 김세훈, "유체-구조 연성해석을 통한 원주의 와유기 진동 해석", 한국전산유체공학회지, 17(1), pp.29~35 (2012), 한국전산유체공학회
- Kim, W., "A Study on the vibration improvement of plant pump", The 2011 Fall Conference of The Korean Society for Noise and Vibration Engineering, pp.697~698 (2011)
- 김영복, "유체부가수질량 절점분포 방법에 의한 전선진동해석", 대한조선학회 논문집, 48(4), pp.368~374 (2011), 대한조선학회
- Kwon, W., "Study of vibration characteristics in operation of vertical pump at power plant", The 2014 Winter Conference of Korean Society For Fluid Machinery, pp.26~28 (2014)
- 이치승, "Evaluation of sloshing resistance performance for LNG carrier insulation system based on fluid-structure interaction analysis", International Journal of Naval Architecture and Ocean Engineering, 5(1), pp.1~20 (2013), 대한조선학회
- 이재환, "심해용 무인잠수정 구조의 민감도해석에 의한 최적설계", 대한조선학회 논문집, 41(3), pp.28~34 (2004), 대한조선학회
- Oh, J.H., "Dynamic characteristic of a structure affected of fluid-structure interaction", The 2013 Fall Conference of The Korean Society for Noise and Vibration Engineering, pp.289~290 (2013)
- Olson, L., "Eigen problems from finite element analysis of fluid-structure interactions", Computers & Structures, 33(3), pp.679~687 (1989)[DOI]
- Rahman, M., "Evaluation of added mass and damping coefficient of an oscillating circular cylinder", Applied Mathematical Modeling, 17(2), pp.70~79 (1993)[DOI]
- Seo, M.K., "Study on vibration characteristics of fluid tank structure for ship", pp.85~89 (2013), Society of Naval Architects of Korea
- Sigrist, J.F., "Dynamic analysis of a nuclear reactor with fluid-structure interaction Part2: shock loading, influence of fluid compressibility", Journal of Elsevier, Nuclear Engineering and Design, 237, pp.289~299 (2006)
- Sigrist, J.F., "Homogenisation method for the dynamic analysis of a complete nuclear steam generator with fluid-structure interaction", Journal of Elsevier, Nuclear Engineering and Design, 238, pp.2261~2271 (2008)[DOI]
- Son, C.Y., "A study on the vibration characteristics of 3-dimension submerged vehicle in consideration of fluid-structure interaction", Journal of Ocean Engineering and Technology, 15(1), pp.19~25 (2001)
- Thinh, T.I., "Dynamaic stiffness method for vibrations analysis of partial fluid-filled orthotropic circular cylindrical shells", Vietnam Journal of Mechanics, Vast, 37(1), pp.43~53 (2015)[DOI]
- Yoo, M.S., "Experimental modal analysis of submerged vertical pump", 2017 Joint Conference by KSNVE, ASK and KSME(DC) (2014)
- Zienkiewicz, O.C., "Finite element method, basic formulation and linear problems" (2014), Elsevier