수압파쇄를 이용한 초기응력 측정 결과의 신뢰도 제고 방안 – 일본 지반공학회 표준시험법 개정안을 중심으로

키워드

참고문헌 (70)

1. 배성호, "수압파쇄법을 이용한 ○○ 원유비축시설 내 수벽 터널에서의 초기응력 측정", 터널과 지하공간, 18(1), pp.80~89 (2008), 한국암반공학회
2. Choi, S., "10 years experience of in-situ stress measurments using a hydraulic fracturing for tunnel design", Korean Society for Rock Mechanics Spering Meeting, pp.79~88 (2008)
3. Cornet, F. H., "Stress determination from hydraulic tests on preexisting fractures –the HTPF method", Proc. Int. Symp. on Rock Stress and Rock Stress Measurements, pp.301~312 (1986), Centek Publ
4. Cowtgill, S. M., "Crustal stresses in the North Sea from breakouts and other borehole data", Proc. 34th US Symp. Rock Mech., Madison, Int. J. Rock Mech. Min. Sci. & Geomech Abstr, 30, pp.113~116 (1993)
5. De la Cruz, R. V., "fracturing technique of stress measurement", Rock Mech, 9, pp.27~42 (1977)
6. Fairhurst, C., "Measurement of in situ rock stresses with particular references to hydraulic fracturing", Rock Mech. Eng. Geol, 2, pp.129~147 (1964)
7. Geertsma, J., "A Rapid Method of Predicting Width and Extent of Hydraulically Induced Fractures", J. Pet. Tech, 21, pp.1571~1581 (1969)
8. Haimson, B. C., "The hydro fracturing stress measuring method and recent field results", Int. J. Rock Mech. Min. Sci. &Geomech. Abstr, 15, pp.167~178 (1978)
9. Haimson, B. C., "Estimating in situ stress conditions from borehole breakouts and core disking - experimental results in granite", Proc. Int. Workshop on Rock Stress Measurement at Great Depth, 8th ISRM Congress, pp.19~24 (1995)
10. Hickman, S. H., "In-situ stress, natural fracture distribution, and borehole elongation in the Auburn geothermal well", J. Geophys. Res, 90, pp.5497~5512 (1985)
11. Hiramatsu, Y., "Determination of the stress in rock unaffected by boreholes or drifts from measured strains or deformations", Int. J. Rock Mech. Min. Sci, 5, pp.337~353 (1968)
12. Hubbert, K. M., "Mechanics of hydraulic fracturing", Petrol. Trans. AIME, T.P, 4597(210), pp.153~166 (1957)
13. Ishida, T., "Observation of core discing and in situ stress measurements; Stress criteria causing core discing", Rock Mech. Rock Engng, 28(3), pp.167~182 (1995)
14. Ito, T, "Effec0t of system compliance on pressure-time curve at reopening and new standard in Japan", 55th US Rock Mechanics, 2021, ~
15. Ito, T., "Hydraulic fracture reopening pressure and the estimation of maximum horizontal stress", Int. J. Rock Mech. Min. Sci. & Geomech. Abst, 36, pp.811~826 (1999)
16. Ito, T., "Problem for the maximum stress estimation by hydrofracturing method and its potential solution", Proc. of the 40th US Rock Mech. Symp, pp.25~29 (2005)
17. Ito, T., "Crucial effect of system compliance on the maximum stress estimation in the hydrofracturing method : Theoretical considerations and field test verification", Earth Planets and Space, 58, pp.963~971 (2006)
18. Kaiser, J., "Erkenntnisse und Folgerungen aus der messung von metallischen Werkstoffen", Arch. Eisenhutt, 24(1, pp.2) (1953), 43~45
19. Kanagawa, T., "Estimation of stress component in rocks using acoustic emission", Proc. JSCE, 258, pp.63~75 (1977)
20. Kanagawa, T., "Review of in-situ stress measurement", Proc. JSCE Symp. Rock Mech, 9, pp.46~49 (1975)
21. 3D in-situ stress measurement using over-coring method, "Kanagawa, T.", CRIEPI, 1~21, pp.CRIEPI Report, 385033 (1983)
22. Kehle, R. O., "Determination of tectonic stresses through analysis of hydraulic well fracturing", J. Geophys. Res, 69, pp.252~273 (1964)
23. Kobayashi, S., "Method for Initial Stress Measurement by Compact Conical-ended Borehole Strain gage", Japan Symposium on Rock Mechanics, 8, pp.279~284 (1990)
24. "Standard Method for Hydraulic Fracturing of in-situ stress Measurement" (2016)[URL]
25. Leeman, E, R., "The Measurement of changes in rock stress due to mining", Mine Quarry Eng, 25(7), pp.300~304 (1959)
26. Leeman, E.R., "The measurement of stress in rock-Parts I, II and III", J. S. Afr. Min. Metall, 65, pp.45~114 (1964)
27. Leeman, E.R., "The Determination of the complete state of stress in rock in a single borehole laboratory and underground measurements", Int. J. Rock Mech. Min. Sci, 5, pp.337~353 (1968)
28. Matsuki, K., "Three-dimensional in situ stress determination by anelastic strain recovery of a rock core", Proc. 34th US Syrup. Rock Mech (1993)
29. Matsuki, K., "In-situ stress measurement using DSA", Proc. Workshop on Crustal Stress Measurement, pp.92~104 (1989), MMIJ
30. Matsuki, K., "Three-dimensional in situ stress measurement with anelastic strain recovery of a rock core", Proc. 7th Cong. Int. Soc. Rock Mech. (ISRM), 1, pp.557~560 (1991), Balkema
31. Matsuki, K., "The relationship between the shape of a disced core and three-diemensional in-situ stresses estimated by a tensile principal stress analysis", Journal of MMIJ, 113, pp.317~324 (1997)
32. Three component borehole deformation gage for determining the stress in rock, "Merrill, R.H.", US Bureau of Mines, ~, pp.US Bureau of Mines Report of Investigation RI 7015 (1967)
33. Mizuta, Y., "Stress and stress change measurements by hydraulic fracturing and double fracturing for safe underground excavation", Proc. 2nd Int. Work Shop on Hydraulic Fracturing Stress Measurement, pp.205~244 (1988)
34. Mizuta, Y., "Three dimensional stress determination by hydraulic fracturing for underground excavation design", Int. J. Rock Mech. Min. Sci. & Geomech. Abstr, 24, pp.15~29 (1987)
35. Obara, Y., "Field stress measurements in jointed rock", Proc. of Int. Conf. on Mech. of Jointed and Faulted Rock, pp.827~834 (1990)
36. Borehole deformation gauge for determining the stress in mine rock, "Obert, L", US Bureau of Mines, ~, pp.US Bureau of Mines Report of Investigation RI 5978 (1962)
37. Oka, Y., "Investigations on the new method of determining rock stress by the stress relief technique and applications of this method", Rock Mechanics in Japan, 3, pp.68~70 (1979)
38. Okabe, T., "Earth’s crust stress field estimation by using vertical fractures caused by borehole drilling", Proc. VIII th International Symposium on the Observation of the Continental Crust Through Drilling, pp.265~270 (1996)
39. Pine, R. J., "In-situ stress measurement in the Carnmenellis Granite-I. Overcoring tests at South Crofty Mine at depth of 790m", Int. J. Rock Mech. Min. Sci. & Geomech. Abstr, 20(2), pp.51~62 (1983)
40. Plumb, R. A., "Stress directions in eastern North America determined to 4.5km from borehole elongation measurements", J. Geophys, Res, 92(B6), pp.4805~4816 (1987)
41. Sakaguchi, K., "Accuracy of rock stress measurement by means of conical-ended borehole technique", Journal of MMIJ, 108, pp.455~460 (1992)
42. Sano, O., "Review of methods of measuring stress and its variations", Bull. Earthq. Res. Inst. Univ., Tokyo, 80, pp.87~103 (2005)
43. Sano, O., , Proc. of the 28th West Japan Symposium on Rock Engineering, pp.65~70 (2007)
44. Sato, T., "Data quality of in-situ stresses by hydraulic fracturing method –applicability of high-compliance system and evaluation of maximum stress based on the results in granite", Journal MMIJ, 128, pp.449~454 (2012)
45. Scheidegger, A. E., "Stresses in the Earth's crust as determined from hydraulic fracturing data", Geologie und Bauwesen, 27, pp.45~53 (1962)
46. Serata, S., "A diametral deformation method for in situ stress and rock property measurement", Int. J. Min. Geol. Eng, 4, pp.15~38 (1986)
47. Seto, M., "The estimation of pre-stress from AE characteristics in cyclic loading of the pre-stressed rock", Japan Symposium on Rock Mechanics, 8, pp.321~326 (1990)
48. Siegfried, R. W., "Characterization of oriented cracks with differential strain analysis", J. Geophys. Res, 83, pp.1269~1278 (1978)
49. Simmons, G., "Differential strain analysis: a new method for examining cracks in rocks", J. Geophys. Res, 79, pp.4383~4385 (1974)
50. Stephansson, O., "Rock stress measurement by sleeve fracturing", Proc. 5th Cong. Int. Soc. Rock Mech. (ISRM), pp.129~137 (1983)
51. Stock, J. M., "Hydraulic fracturing stress measurements at Yucca Mountain, Nevada and relationship to the regional stress field", J. Geophys., Res, 90(B10), pp.8691~9706 (1985)
52. Strickland, F. G., "Use of differential strain curve analysis in predicting the in-situ stress state for deep wells", Proc. 21st US Symp. Rock Mech, pp.523~532 (1980), University of Missouri Publ
53. Sugawara, K., "Measurement of In-situ Rock Stress by Hemispherical-ended Borehole Technique", Int. J. Min. Sci. & Tech, 3, pp.287~300 (1986)
54. Sugawara, K., "A study on core discing pheonomenon", Journal of MMIJ, 94(1089), pp.797~803 (1978)
55. Sugawara, K., "Rock stress measurement using sleeve fracturing", Japan Symposium on Rock Mechanics, 7, pp.181~186 (1987)
56. Sugawara, T., "Development of Rock stress measurement system by borehole deformation method", Proc. MMIJ Spring Meeting, pp.127~128 (1999)
57. Synn, J., "Hydraulic fracturing and 2D-3D in-situ stress analysis in jointed rock mass", Korean Society for Rock Mechanics Spring Meeting, pp.11~15 (2013)
58. Teufel, L. W., "Determination of in-situ stress from anelastic strain recovery measurements of oriented core", Symposium on low permeability gas reservoirs, pp.421~430 (1983), SPE[DOI]
59. Voight, B., "Determination of the virgin state of stress in the vicinity of a borehole from measurements of a partial anelastic strain tensor in drill cores", Felsmechanik und Ingenieurgeologi, 6, pp.201~215 (1968)
60. Wolter, K. E., "Time dependent strain recovery of cores from KTB-deep drilling hole", Rock Mech. Rock Eng, 22, pp.273~287 (1989)
61. Yamamoto, "Standard method of DRA", Fall meeting of The mining and materials processing institute of Japan, pp.71~76 (2000)
62. Yokoyama, K., "Standardization and globalization of initial stress measurement techniques developed and improved in Japan", Journal of MMIJ, 129, pp.683~693 (2013)
63. Yokoyama, K., "In-situ stress measurement by AE and deformation rate analysis, Japan", Applied Geological Society Conference, pp.5~8 (1989)
64. Yokoyama, K., "In-situ stress measurement by core discing", Proc. of MMIJ 2012, pp.256~268 (2012)
65. Yokoyama, T., "Current status and standardization of initial stress measurement techniques", Annual Report of Applied Geology, 36, pp.2017~ (2017)
66. Yokoyama, T., "A proposal of geo-stress measurement technique by plate fracturing", Proc. of the international symposium on rock stress Kumamoto, pp.143~148 (1997)
67. Yokoyama, T., "Development and application of high stiffness hydraulic fracturing systems for stress measurements corresponding to new standard in Japan", 55th US Rock Mechanics, 2021, ~
68. Yokoyama, T., "Development of borehole-jack fracturing technique and in situ measurements", Rock Stress and Earthquakes, pp.93~100 (2010)
69. Zoback, M. D., "Determination of stress orientation and magnitude in deep wells", Int. J. Rock Mech. Min. Sci., 40, pp.1049~1076 (2003)
70. Zoback, M. D., "Wellbore breakouts and in situ stress", J. Geophys Res, 90, pp.5523~5530 (1985)

관련 논문AI추천